Cerwin-Vega HED TWEETER H4TAK User manual

HED
TWEETER
H4TAK
USERS MANU
AL

- 3dB
- 6dB
- 9dB
0dB
+9dB
+6dB
+3dB
2,560Hz 5,120Hz 10,240Hz 20,480Hz
H4TAK Frequency Response
H4TAK Tweeter - 500 Watts MAX
1.0” Silk Dome Tweeter Add-on Kit
Frequency Response: 3.5Khz - 20Khz
Sensitivity: 97dB
Impedance: 4 ohms
Dispersion: 90 degrees
Signature Cerwin Vega Sound!
Grills, crossover and Hardware
Features/Specifications

FUSE
+
8 ohm/20 W Resistor
AMPLIFIER
INPUT
TO
CROSSOVER
+
OUTPUT
FROM
CROSSOVER
H4TAK
TWEETER
Tweeter Mounting/Installation
2.36”/60mm
1.57”/40mm
1.18”/30mm
H4TAK PASSIVE CROSSOVER HOUSING
(physical dimensions)
Make sure to connect the output of the amplier into the input of the crossover, and the output of the crossover to the
tweeter. If hooking up more than one(1) tweeeter use a load resistor to compensate for output levels and impedance.
NOTE: For high powered system applications: 60-100 Watts (RMS) Please use an 8 ohm/20 watt resistor
in series (in-line) with the Tweeter postive terminals (as shown below - NOT included - Parts Express Part # 017-8)
!CAUTION ! Hooking the crossover backwards will void the warranty.
Learn more about speakers on our website.