CH Byron Home Easy HE-209 User manual

C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR
Contact Details:
433MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
0560
Tel: [phone]
Fax: [phone]
Web: www.chbyron.com
E-mail:
[email protected]
HE-209 4Gang Extender
V1.0
The HE-209 is a 4Gang Remote Control extension
socket, simply press "On/Off" to switch on and off 4
appliances in a single press.The HE-209 is part of the
HomeEasy range of products and is designed to work
with all HomeEasy products.
Contact:   Helpline: 0845 2301 231
RE-INVENTING THE HOME
Product Operation:
HOME
easy
Pairing/Deleting with Remote Control:
Up to Six remote control units can be paired with each 4Gang Receiver
Socket.To program the 4Gang Extender, insert the Receiver Socket into a
plug socket and switch on the power, now press the "Learn" button.The LED
will start to flash, now press the selected "On" button on the remote control,
the LED will stop flashing.The units are now paired together, you can test this
by pressing the selected "On/Off" button, the red power light will switch
on when the 4gang extension is on.
Product Specification:
4Gang Extension: HE-209
Input: 230V ~50Hz
Range: 30 Metres (Open Distance)
Frequency: 433.92MHz
Max Load: 3000W
(Combined Resistive load)
Indoor Use Only
* All 4 extension sockets will switch on and off together.
Warning: Never Exceed the Product Specification
Learn:
Remote Socket reset:
To delete all the remote control units from the memory of the 4Gang
Extender, hold the "Learn" button until the LED starts to blink
continuously. Press the "Learn" button again, the LED will blink twice to
confirm that all paired remote controls have been deleted from the
receiver sockets memory.
easy
HOME
FUSE
Fuse 13Amp BS1362.
easy
HOME
Deleting Remote Control:
To delete a remote control that has been paired with a 4Gang Extender, simply
press the "Learn" button.The LED will start to blink; press the "Off" button on
the remote control,the LED will blink twice to confirm that the remote control
has been removed from the receiver sockets memory.
The HE-209 has a max combined load for
the 4 individual extension sockets
of 3000W.
Remote Control: HE-300
Input: 3v Cr2032 (Byron Sx100)
Frequency: 433.92MHz
Indoor Use Only
Remote control unit:
Pull out the battery slide holder from the bottom of the controller. Replace the
CR2023 (Byron SX100) battery making sure the polarity is correct as per markings
inside the case.
Outdoor Socket:
No batteries are required for the 4gang Extension unit.
Changing Battery:
The HE-209 is fitted with a 13Amp BS1762, to replace the fuse:
1: Using a small screwdriver remove the fuse holder from the 4gang extension unit.
2: Replace the fuse with a 13Amp BS1762.
3: Replace the fuse holder, making sure the holder is correctly pushed in.
Changing Fuse:
2M
Remote Receiver
Socket
4Gang Extender

Page1:2
HOME
easy
Quick Guide
easy HOME
1 2 4 3
G
II III
I IV
30m ONOF
F
Indavidual
3000W
MAX
Group
easy HOME
FUSE
Fuse 13Amp BS1362.
1 2
3000W MAX
FUSE
ON
easy HOME
Learn
ON
easy HOME
Learn
easy
HOME
1
2
4
3
G
II III
IIV
ON OFF