Champion Model I 44 User manual

(1M) 3/06 Printed in U.S.A. Dimensions shown in inches and [millimeters]
CH907-I
44" [1118] Single Tank
High-Temperature
Rack Conveyor Dishwashing Machine
MODEL I 44
MODEL I 44 RACK CONVEYOR
SPECIFIER STATEMENT
Specified unit will be Champion Model I 44 high
temperature rack conveyor dishwashing machine.
Constructed of Type 304 stainless steel and
measuring 44" [1118] long with 20-3/4" [527] vertical
opening. Features top mounted control cabinet;
upper and lower one-piece stainless steel spray
arm assemblies. Large 26" [660] wash door with
front access and safety switch. Anti-jam conveyor
drive system.
Shown with Vent Cowl
and Damper Option
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115 USA
Tel: [phone] Fax: [phone]
www.championindustries.com
STANDARD FEATURES
• One-piece cast stainless steel upper
& lower spray arm assemblies
• Standard vertical opening 20-3/4" [527]
• Wide 26" [660] leakproof doors,
internally-fitted
• Front enclosure panels
• Stainless steel heavy-gauge construction,
including base and feet
• Stainless steel pump and impeller
• Wash pump 2 Hp motor
• Electric tank heat
• Automatic tank fill
• 40°F internal booster
• Low-water tank heat protection
• Energy/rinse-saver device
• Anti-jam conveyor drive system
• Convenient top-mounted controls
• Common utility connections
• Pressure regulator valve (PRV)
• Door safety switch
Project
Item No.
Quantity

44" [1118] Single Tank
High-Temperature
Rack Conveyor Dishwashing Machine
MODEL I 44
Wall-of-Water
Spray Pattern
Large Heating Element
Two-Piece Scrap Screen
Stainless Steel
Built-in Nested Booster
One-Piece Cast Stainless
Steel Spray Assembly
EFFICIENT NEW
SPRAY SYSTEM DESIGN
To make the E-Series more efficient and
more forgiving we designed a new spray
arm system that includes:
• Wall-of-water spray pattern via
stainless steel fluted directional spray
jets for quick and efficient washing
• Easily removable spray arm assembly
for ease of cleaning
• Stainless steel pump housing
and impeller
• Larger tanks hold more water for
better washing results
INTEGRATED
BOOSTER HEATER
As well as the E-Series performs, we
created a way to make it perform even
better. The electric booster heater is an
exceptional value — engineered within
the E-Series footprint to offer a variety
of advantages over other booster
designs, such as:
• Inter-plumbed and inter-wired
• One control shuts off washer and
booster
• 15 kW for 40°F/22°C rise
• 24 kW for 70°F/39°C rise (optional)
• Conductive heat transfer to wash tank
• Stainless steel booster heater lasts
the life of the machine
• Integrated design saves floor space
www.championindustries.com

Left-to-Right Operation
Cowl
BSTR
3
4B
4A 1A
2HP
WASH
Door
2
Door
Removal
Door
Open
Height
Machine
Height
4" 4"
5"
5" [127] [191]
Plumbing
Clearance
Clear
Load
Height
20-3/4"
[527]
34"
[864]
3"
89" [2261]
82"
[2083]
58-1/2"
[1486]
7" [178]
60" [1524]
44" [1118]
12" [305]
Cowl
2
4A
1A
3
4B
25"
[635]
28-1/2"
[724]
36" [914]
14-1/2" [368]
6" [152]
8"
[203]
8"
[203]
12-1/2"
[318]
16" [406]
2" [51]
9-1/4"
[235]
14-1/2"
[368]
10" [254]
Front View
Plan View End ViewSuggested Table
Construction
6" [152] Nom.
Wall
CONTROL
CABINET
22" [559]
2-1/2"
[64] 2-3/8" [60]
3-5/8" [98]
30-5/8"
[779]
2"
[51]
2"
[51] 20-1/8"
[511]
25" [635]
30-5/8"
[778]
33" [838]
OPENING
INS. TRACK
1B
6"
7-1/2"
2-1/4"
[57]
1-3/4" [44]
1-1/2" [38] Can be up
to 10" [254]
5/8"
[16]
21" [533]
[102]
[152]
[102]
8"
[203]
8"
[203]
26" [660]
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 USA • 800/532-8591 • Fax: [phone] • www.championindustries.com
44" [1118] Single Tank
High-Temperature
Rack Conveyor Dishwashing Machine
MODEL I 44

Right-to-Left Operation
Cowl Cowl
BSTR
3
4B 4A
1A
2HP
WASH
Door
2
Door
Removal
Door
Open
Height
Machine
Height
4"
4"
Plumbing
Clearance
Clear
Load
Height
3"
2
4A
1A
3
4B
Front View
Plan View End ViewSuggested Table
Construction
1B
6"
7-1/2"
5" [127]
5" [127]
20-3/4"
[527]
34"
[864]
89" [2261]
82"
[2083]
58-1/2"
[1486]
7" [178]
60" [1524]
44" [1118]
12" [305]
[102] [102]
[76]
8"
[203] 8" [203]
[191]
[152]
26" [660]
8"
[203]
2-1/4"
[57]
1-3/4" [44]
1-1/2" [38] Can be up
to 10" [254]
5/8"
[16]
21" [533]
6" [152] Nom.
Wall
CONTROL
CABINET
22" [559]
2-1/2"
[64] 2-3/8" [60]
3-5/8" [98]
30-5/8"
[779]
2"
[51]
20-1/8"
[511]
25" [635]
30-5/8"
[778]
33" [838]
OPENING
INS. TRACK
25"
[635]
28-1/2"
[724]
36" [914]
14-1/2" [368]
6" [152]
8"
[203]
12-1/2"
[318]
16"
[406]
2" [51]
9-1/4"
[235]
14-1/2"
[368]
10" [254]
2"
[51]
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 USA • 800/532-8591 • Fax: [phone] • www.championindustries.com
44" [1118] Single Tank
High-Temperature
Rack Conveyor Dishwashing Machine
MODEL I 44

Volume crated: 122 cu. ft./3.5 cu. m.
Shipping weight crated: 750 lbs./340 kg.
Dimensions shown in inches and [millimeters]
Warning: Plumbing and electrical connections should be made by
qualified personnel who will observe all the applicable plumbing,
sanitary, safety codes and the National Electrical Code.
Note: Water Hammer Arrestor (meeting ASSE-1010 standard or
equivalent) to be supplied
(by others) in common water supply line at service connection.
Venting Notes: Fabricated duct size:
3-7/8" x 15-7/8" (Outside dimensions)
Machine only
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
220/60/3 47 60 60
380/50/3 47 60 60
MACHINE CONNECTION
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 USA • 800/532-8591 • Fax: [phone] • www.championindustries.com
Utilities
1Electrical
AMachine connection
BBooster connection
2Hot Water
3/4" [19] NPT 140°F/60°C min. hot water connection.
(40°F/22°C rise booster)
3/4" [19] NPT 110°F/49°C min. hot water connection.
(70°F/39°C rise booster)
Flow pressure 20-22 psi.
3Drain
1-1/2" NPT machine connection. Maximum flow 15 gpm.
4Vents
ALoad end: 200 CFM @ 1/4" [6] S.P.
BUnload end: 400 CFM @ 1/4" [6] S.P.
(With blower-dryer increase room ventilation by 600 CFM.)
44" [1118] Single Tank
High-Temperature
Rack Conveyor Dishwashing Machine
MODEL I 44
SPECIFICATIONS
Capacity
Racks per hr. 208
Wash tank US Gal. 21
Liter 79
Conveyor speed (ft/min.) 5.8
Motor Horsepower
Drive 1/6
Wash 2
Water Consumption
Per hr. (max. use) US Gal. 124
Liters 469
Per rack US Gal. .60
Liters 2
Heating
Tank Heat, electric (kW) 15
Electric booster (built-in)
(Available 40°F rise only) 15
Electric booster (optional)
(kW supplied for 70°F rise) 24
Venting
Load end (minimum CFM) 200
Unload end (minimum CFM) 400
Standard 20" [508] x 20" [508]
rack complement
Peg 2
Flat 1
70°F/39°C Rise – 24kW
Electric built-in booster (booster only)
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
220/60/3 105 115 115
380/50/3 105 115 115
BOOSTER CONNECTION
40°F/22°C Rise – 15kW
Electric built-in booster (booster only)
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
220/60/3 83 110 110
280/50/3 83 110 110

44" [1118] Single Tank
High-Temperature
Rack Conveyor Dishwashing Machine
MODEL I 44
MODEL I 44 RACK CONVEYOR
OPTIONS & ACCESSORIES
Booster Heaters
(completely interplumbed, controls are interwired)
Electric: 24 kW (Optional 70°F rise) (3 phase only)
Cantilever sideloader (with or without hood)
for 90° load operation
Extended pawl bar (extended drive unit) for use
with load tabling
90° Motorized rack advance conveyor (unload)
180° Motorized rack advance conveyor (unload)
Racks: peg or flat racks (specify type)
Roller conveyor table (mobile or stationary)
Table limit switch, unmounted (recommended
on all rack conveyor installations)
Vent cowl, stainless steel with 7" stack and
locking damper
Vent fan control
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 USA • 800/532-8591 • Fax: [phone] • www.championindustries.com
Model MRA 90
90° Motorized Rack
Advance Curve
(Must be ordered with
Roller Conveyor Table)
Model MRA 180
180° Motorized Rack
Advance Curve
(Must be ordered
with Roller
Conveyor Table)
Model RCT 64
or RCT 84
Roller Conveyor
Table
Cantilever
Sideloader
(no hood)