P-0120
12ED
10EF
1AF5
1EE5
1BE4
1FE0
17EB
09F6
06F9
03FC
03FC
00FF
08F7
05FA
02FD
0FFD0BF4
01FE
04FB
07F8
0AE5
4EB1 53AC 4FB0 51AE
RS-232 Control Code:
Baud Rate: 9600, No Parity, 8Bit Data, 1 Stop bit
Each transmission = 6bytes
Control No.:86H(Set Terminal), 66H(Ask Terminal Status),
76H(Set Power & Input), 56H(Ask Power & Input Status)
C:= (Control No. + Terminal(1)+Terminal(2) + Terminal(3) + Terminal(4))
Invert the result and truncate the 8 least significant bits.
N: 31H~36H (31H is input 1, 32H is input 2, 33H is input 3, etc.)
S: 00H (Power off), FFH (Power On)
T: 00H (Enable Input), FFH (Disable Input)
Note:
Using the Remote:
Using advanced control systems:
The model P-0120 remote control comes with
the P-1420 Matrix Switcher to allow easy
source selection without having to use the
buttons on the front the P-1420. The buttons
are arranged in 4 columns and 6 rows. There is
one column for each output and one row for
each source. For example, to select source 6
to be output in zone 4, press the button in the
lower right hand corner of the remote.
For installations that require more sophistication
the P-1420 also supports RS-232 making it well
suited for use with Creston, AMX, and other
automation systems that support RS-232.
See RS-232 control information below.
Included Accessories
P-0120 remote control ... The hand held remote
can be used to control the P-1420 from the front of
the unit or from another room through the use of an
IR repeating system. The IR control codes can also
be downloaded from www.channelvision.com.
Power Supply... 12VDC@1500 - 3000mA
What is a matrix switcher?
How do the signals get to other rooms?
Simultaneous access to multiple sources is what differentiates a matrix
switch from a simple switch which would only allow one source to be
viewed by multiple zones.
The P-1420 is
perfect for this application, as it allows 6 sources to be accessed by 4
different users simultaneously.
A matrix switcher allows multiple users to
access signals from multiple source components. This type of
switching is ideal for whole-house application. For example, it may be
necessary to view the DVD player in the bedroom while, at the same
time, viewing the satellite receiver in the home theater.
We suggest the use of a high quality video distribution system such as
Channel Vision’s P-1400 zero-loss video distribution system. This unit
delivers flawless video signals over a 25 meter pre-made cable. The
cable has been precisely constructed to match the pre-amplification
provided by the P-1400. The cable must not be shortened or the
benefits of the P-1400 will be negated.
POWER
AV1
AV2
AV3
AV4
AV5
AV6
OUT-1 OUT-2 OUT-3 OUT-4
Channel VisionTM
