Chauvet DJ Freedom Par T6 User manual

User Manual

Table of Contents
Freedom Par T6 User Manual Rev. 1
Table of Contents
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Unpacking Instructions.................................................................................. 1
Claims ............................................................................................................................ 1
Text Conventions .......................................................................................... 1
Symbols ........................................................................................................ 1
Safety Notes.................................................................................................. 2
Battery Charge Notes.................................................................................... 2
FCC Compliance............................................................................................................ 3
RF Exposure Warning for North America and Australia................................................. 3
Disclaimer ..................................................................................................... 3
2. Introduction ................................................................................ 4
Product Overview.......................................................................................... 4
3. Setup ........................................................................................... 5
AC Power...................................................................................................... 5
Battery Power................................................................................................................. 5
Mounting ....................................................................................................... 6
Orientation...................................................................................................................... 6
Rigging ........................................................................................................................... 6
Accessories................................................................................................... 7
4. Maintenance................................................................................ 8
Product Maintenance .................................................................................... 8
5. Operation .................................................................................... 9
Control Panel Operation................................................................................ 9
Menu Map ..................................................................................................... 9
Configuration (DMX) ..................................................................................... 11
DMX Personality and Starting Address.......................................................................... 11
DMX Values .................................................................................................. 11
Configuration (Standalone) ........................................................................... 13
Preset Color Mode ......................................................................................................... 13
Fixed Color Mode........................................................................................................... 13
Custom Color Mixing...................................................................................................... 13
Automatic Programs....................................................................................................... 14
Sound Sensitivity............................................................................................................ 14
D-Fi Setting .................................................................................................................... 14
RF Setting ...................................................................................................................... 15
Run Time........................................................................................................................ 15
Dimmer Mode................................................................................................................. 15
Display Back Light.......................................................................................................... 15
Password ....................................................................................................................... 15
Product Information........................................................................................................ 15
Factory Reset................................................................................................................. 16
Master/Slave Mode ....................................................................................... 16
RFC-XL Remote Control............................................................................... 16
RFC-XL Remote Control Operation ............................................................................... 17
6. Technical Specifications ........................................................... 18
Contact Us ...................................................................................... 19
Warranty & Returns....................................................................................... 19

1
Freedom Par T6 User Manual Rev. 1
Before You Begin
1. Before You Begin
What Is Included
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate the claim. Keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
• Freedom Par T6
• External power supply
• Magnetic diffuser
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
ON A value to be entered or selected
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
!

2
Before You Begin
Freedom Par T6 User Manual Rev. 1
Safety Notes
Battery Charge Notes
Rechargeable lithium-ion batteries are potentially hazardous and can present a serious FIRE HAZARD,
SERIOUS INJURY and/or PROPERTY DAMAGE if damaged, defective, or improperly used.
■ ALWAYS:
• Connect to a grounded circuit.
• Connect to operating voltages as specified on the product's spec sticker.
• Disconnect from power before replacing the fuse.
• Disconnect from its power source during periods of inactivity.
• Use a safety cable when suspending overhead.
• Heed all restrictions and warnings on the spec sticker.
• Mount in a location with at least 20 in (50 cm) of ventilation.
■ In the event of a serious operating problem, stop using immediately.
■DO NOT:
• Open this product or attempt any repairs. It contains no user-serviceable parts.
• Look at the light source when the product is on.
• Use if the power cord is crimped or damaged.
• Disconnect by pulling on the power cord.
• Allow flammable materials close to the product when it is operating.
• Touch the housing when it is on.
• Block any ventilation holes/slots in the housing.
• Connect to a dimmer or rheostat.
• Carry the product by its power cable.
• Operate in temperatures higher than 104°F (40°C).
• Expose to environments that exceed the Ingress Protection (IP) rating.
• Expose to rain or moisture.
• Use outdoors.
■ ALWAYS:
♦ Charge using a manufacturer-provided charger while the product is powered off.
♦ Charge the battery in temperatures between 32°–95°F (0°–35°C).
♦ Allow a depleted battery to charge for a few minutes before turning on the product. If the
battery is completely discharged, the device cannot be turned on immediately when the
charger is connected.
♦ Keep at least 3 ft (1 m) distance to any heat source and away from flammable materials.
♦ Keep the lid of any charging case open while charging.
♦ Keep batteries away from children.
♦ Store batteries between 40–60% charge.
♦ Follow local regulations when disposing of batteries.
♦ Replace with an authentic Chauvet battery.
■DO NOT:
♦ Continue charging if the battery becomes hot, smokes, swells, or gives off an odor during
charging.
♦ Leave the product unattended while charging.
♦ Deplete the battery below 10%.
♦ Charge the battery in a closed container.
♦ Charge for more than 24 hours.

3
Freedom Par T6 User Manual Rev. 1
Before You Begin
FCC Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
RF Exposure Warning for North America and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and the user. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetdj.com.
The works of authorship contained in this manual, including, but not limited to, all designs, text, and images
are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Chauvet, the Chauvet logo, and Freedom Par T6 are registered trademarks or trademarks of Chauvet &
Sons LLC. (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company
and product names and logos referred to herein may be trademarks of their respective companies.
Keep this User Manual for future use.

4
Introduction
Freedom Par T6 User Manual Rev. 1
2. Introduction
Product Overview
Product Dimensions
Menu button
Kickstand
Kensington
security slot
Kickstand
release
Display screen
Microphone
DC
power in
Carry handle
Magnetic
diffuser
Power button
3.9 in
98 mm
5.1 in
130mm
3.9 in
98 mm

5
Freedom Par T6 User Manual Rev. 1
Setup
3. Setup
AC Power
The Freedom Par T6 has an external power supply and can work with an input voltage of 24 VDC, 50/60 Hz. To
determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value
listed on the label affixed to the product’s back panel or refer to the product’s specifications chart. The listed
current rating indicates the product’s average current draw under normal conditions.
Battery Power
The Freedom Par T6 comes with a rechargeable lithium battery for cable-free operation.
Charging the Battery
The battery charges whenever the Freedom Par T6 is plugged into a power source using the included
power cord. If the product is plugged in and not in operation, make sure the product is turned off.
Battery Life Indicator
The indicators on the LED Menu Display show how much battery life remains available. The drawing below
provides a key to reading the battery life indicators.
Battery Run Time
• Always connect the product to a protected circuit (a circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, completely
disconnect the product from power via breaker or by unplugging it during
periods of non-use.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
• Before charging the product, read and follow the safety recommendations in the
Safety Notes.
• The LED indicator light will flash if units are overcharged.
• DO NOT use the Freedom Par T6 on full power mode (all LEDs at 100%) while
being charged/plugged into a power source, as the unit will get extremely hot.
Maximum Run Time Recharge Time
Up to 12 hours 4 hours
!
80% 60% 40% 20%
100%

6
Setup
Freedom Par T6 User Manual Rev. 1
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation
The Freedom Par T6 may be mounted in any position; however, make sure adequate ventilation is
provided around the product.
Rigging
• Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and programming purposes.
• Make sure adequate ventilation is provided around the product.
• Mount the product on a structure or surface that can support the product's weight (see the Te chnic a l
Specifications for weight information).
• Always use a safety cable when mounting the product overhead. Mount the product securely to a
rigging point (e.g., an elevated platform or a truss).
• Use a mounting clamp of appropriate weight capacity when rigging the product onto a truss.
Mounting Diagram
Safety cable
(such as CH-05 from Chauvet)
Mounting clamp
(such as CLP-15 or CLP-15N
from Chauvet)

7
Freedom Par T6 User Manual Rev. 1
Setup
Accessories
The Freedom Par T9 comes with a removable magnetic diffuser. To attach or remove the magnetic diffuser, see
the diagram below:
Magnetic diffuser

8
Maintenance
Freedom Par T6 User Manual Rev. 1
4. Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean
all lighting products at least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens-cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.

9
Freedom Par T6 User Manual Rev. 1
Operation
5. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located next to the display. Please refer to the
Introduction to see the button locations on the control panel.
Menu Map
Refer to the Freedom Par T6 product page on www.chauvetdj.com for the latest menu map.
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
Main Menu Programming Levels Description
DMX Address 001–500 Selects DMX starting address
DMX Channel
3 Ch 3-channel DMX mode
5 Ch 5-channel DMX mode
13 Ch 13-channel DMX mode
Static Preset
RED
Selects preset colors
GREEN
BLUE
AMBER
YELLOW
MAGENTA
SUNSET
CYAN
LIME GREEN
WHITE
SOL
SEAFOAM
TURQUOISE
ORANGE
BABY BLUE
HOT PINK
EMERALD
OCEAN
BABY PINK
GOLDENROD
SKY
LAVENDER
FADED ORANGE
FUSCHIA
AMBIENT
2700K
3500K
4000K
5000K
6000K

10
Operation
Freedom Par T6 User Manual Rev. 1
Static
Fixed Color
R
Selects a single static color or a
combination of static colors
G
B
RG
RB
GB
RGB
Manual Color
R= _ _ _
0–255
Combines red, green, blue, and amber to
make a custom color (0–100%)
G= _ _ _
B= _ _ _
Auto Show
Auto 1–4 Speed
0–100
Selects the foreground and background
colors, and adjusts the speed of auto
programs
Note: Foreground and background colors
are available only for auto programs 5–9.
Auto 5–9
Speed
0–100
FG Color
BG Color
R
G
B
RG
RB
GB
RGB
Main Menu Programming Levels Description

11
Freedom Par T6 User Manual Rev. 1
Operation
Configuration (DMX)
The Freedom Par T6 works with a DMX controller. Information about DMX is in the Chauvet DMX Primer
available from the Chauvet website: www.chauvetdj.com.
DMX Personality and Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode
uses. Choosing a starting address that is too high could restrict access to some of the product’s channels.
The Freedom Par T6 uses up to 13 DMX channels in a 13Ch DMX mode, which defines the highest
configurable address to 500.
For more information about the DMX protocol, download the DMX Primer from: www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until DMX Address shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address, from 001–500.
4. Press <ENTER>.
DMX Values
3Ch 5Ch 13Ch Function Value Percent/Setting
– 1 1 Dimmer 000  255 0–100%
1 2 2 Red 000  255 0–100%
2 3 3 Green 000  255 0–100%
3 4 4 Blue 000  255 0–100%
– 5 5 Strobe 000  010 No function
011  255 Strobe, slow to fast
– – 6 Color macro
000  010 No function
011  030 R: 100% G: 0–100% B: 0%
031  050 R: 100–0% G: 100% B: 0%
051  070 R: 0% G: 100% B: 0–100%
071  090 R: 0% G: 100–0% B: 100%
091  110 R: 0–100% G: 0% B: 100%
111  130 R: 100% G: 0% B: 0–100%
131  150 R: 100% G: 0–100% B: 0–100%
151  170 R: 100–0% G: 100–0% B: 100%
171  200 R: 100% G: 100% B: 100%
201  205 Color 1
206  210 Color 2
211  215 Color 3
214  220 Color 4
221  225 Color 5
226  230 Color 6
231  235 Color 7
236  240 Color 8
241  245 Color 9
246  250 Color 10
251  255 Color 11

12
Operation
Freedom Par T6 User Manual Rev. 1
– – 7 Auto programs
000  021 No function
022  043 Auto program 1
044  065 Auto program 2
066  087 Auto program 3
088  109 Auto program 4
110  131 Auto program 5
132  153 Auto program 6
154  175 Auto program 7
176  197 Auto program 8
198  219 Auto program 9
220  241 Auto program 1–4
242  255 Sound show
––8
Foreground color
dimmer 000  255 0–100%
––9
Foreground color
(when Channel 7 is
set to 110  219)
000  005 Red
006  010 Green
011  015 Blue
016  020 Red + green
021  025 Red + blue
026  030 Green + blue
031  035 Red + green + blue
036  055 Off
––10
Background color
dimmer 000  255 0–100%
––11
Background color
(when Channel 7 is
set to 110  219)
000  005 Red
006  010 Green
011  015 Blue
016  020 Red + green
021  025 Red + blue
026  030 Green + blue
031  035 Red + green + blue
036  255 Off
––12
Auto speed 000  255 Auto speed, slow to fast
Sound sensitivity
(when Channel 7 is
set to 242  255)
000  010 Sound sensitivity off
011  255 Control sound sensitivity
––13
Dimmer speed
mode
000  051 Preset dimmer speed from display menu
052  101 Dimmer speed mode off
102  152 Dimmer speed mode 1 (fastest)
153  203 Dimmer speed mode 2
204  255 Dimmer speed mode 3 (slowest)
3Ch 5Ch 13Ch Function Value Percent/Setting

13
Freedom Par T6 User Manual Rev. 1
Operation
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Preset Color Mode
To run the Freedom Par T6 on a preset static color, follow the instructions below:
1. Press <MENU> repeatedly until Static shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Preset.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select a preset color, from Red, Green, Blue, Amber, Yellow,
Magenta, Sunset, Cyan, Lime Green, White, Sol, Seafoam, Turquouise, Orange, Baby Blue,
Hot Pink, Emerald, Ocean, Baby Pink, Goldenrod, Sky, Lavender, Faded Orange, Fuschia,
Ambient, 2700K, 3500K, 4000K, 5000K, or 6000K.
6. Press <ENTER>.
Fixed Color Mode
To run the Freedom Par T6 on a single static color or a combination of static colors, do the following:
1. Press <MENU> repeatedly until Static shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Fixed Color.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select a static color, from R, G, B, RG, RB, GB, or RGB.
6. Press <ENTER>.
Custom Color Mixing
To custom mix a static color, do the following:
1. Press <MENU> repeatedly until Static shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Manual Color.
4. Press <ENTER>.
5. Press <ENTER> and one of the following will show on display.
•R= _ _ _ (red)
•G= _ _ _ (green)
•B= _ _ _ (blue)
6. Press <ENTER> to cycle through the color settings.
7. When the desired color shows on the display, use <UP> or <DOWN> to increase or decrease the
color value, from 0–255 (red, green, blue).
8. Repeat steps 5 and 6 until the product outputs as desired.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.

14
Operation
Freedom Par T6 User Manual Rev. 1
Automatic Programs
To run the Freedom Par T6 in automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until Auto Show is displayed.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select an automatic program, from Auto 1–9.
4. Press <ENTER>.
To choose a foreground or background color for the auto programs, (programs 5-9 only) do the following:
1. Follow steps 1–4 above to select an automatic program.
2. Use <UP> or <DOWN> to select between FG Color (foreground color) and BG Color
(background color).
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select a static color, from R, G, B, RG, RB, GB, RGB, or Off (turns off
foreground or background color).
5. Press <ENTER>.
To change the auto-program speed on the Freedom Par T6, do the following:
1. Follow steps 1–4 above to select an automatic program.
2. Use <UP> or <DOWN> to select Speed.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to increase or decrease the program speed, from 0–100.
5. Press <ENTER>. The product will return to the last selected mode.
Sound Sensitivity
To set the sound sensitivity on the Freedom Par T6, follow the instructions below:
1. Press <MENU> repeatedly until Sound Show is displayed.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the sound sensitivity, from 000–100.
4. Press <ENTER>.
D-Fi Setting
To access the D-Fi Setting menu on the Freedom Par T6 do the following:
1. Press <MENU> repeatedly until D-Fi Setting shows on the display.
2. Press <ENTER>.
To activate or deactivate the D-Fi mode on the Freedom Par T6, follow the instructions below:
1. Access the D-Fi Setting menu to select the D-Fi On/Off option.
2. Use <UP> or <DOWN> to select On (to activate D-Fi mode) or Off (to deactivate D-Fi mode).
3. Press <ENTER>.
To set which D-Fi mode the Freedom Par T6 will follow, do the following:
1. Access the D-Fi Setting menu to select the D-Fi Mode option.
2. Use <UP> or <DOWN> to select Receive (to set the product to receive D-Fi signal) or Transmit
(to set the product to transmit D-Fi signal).
3. Press <ENTER>.
To set the D-Fi channel on the Freedom Par T6, follow the instructions below:
1. Access the D-Fi Setting menu to select the D-Fi Channel option.
2. Use <UP> or <DOWN> to set the D-Fi channel, from CH01–CH16.
3. Press <ENTER>.
The foreground and background color options are available only for auto programs 5–8.

15
Freedom Par T6 User Manual Rev. 1
Operation
RF Setting
To set how the Freedom Par T6 will receive RF signal and work with RF remotes, do the following:
1. Press <MENU> repeatedly until RF Setting shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select from the following: Link (to link the product to a single RF
remote), Public (to allow the fixture to respond to all RF signals), Group (to set which group of
fixture the RFC/RFC-XL remote will control), or Off (to turn off RF reception).
4. Press <ENTER>.
To set the RF Group:
5. Use <UP> or <DOWN> to select Group 1–4.
6. Press <ENTER>.
Run Time
To adjust the run time on the Freedom Par T6:
1. Press <MENU> repeatedly until Run Time shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the number of hours the fixture will run: 3 Hours , 5 Hours , 8 Hours ,
12 Hours , or Off .
4. Press <ENTER>.
Dimmer Mode
To select the dimmer mode, follow the instructions below:
1. Press <MENU> repeatedly until Dimmer Mode shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select from Dimmer 1 (fastest) to 3 (slowest) or Off (linear dimmer).
4. Press <ENTER>.
Display Back Light
To select how long a period of inactivity before the display automatically turns off, do the following:
1. Press <MENU> repeatedly until Dimmer Mode shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the back light timer: 10S (10 seconds), 30S (30 seconds), 2Min
(2 minutes), or
Always On .
4. Press <ENTER>.
Password
To password protect a Freedom Par T6 fixture, follow the instructions below:
1. Press <MENU> repeatedly until Password shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select On (activates password protection) or Off (deactivates password
protection).
4. Press <ENTER>.
Product Information
To view the product information, do the following:
1. Press <MENU> repeatedly until Information shows on the display. Press <ENTER>.
2.
Use <UP> or <DOWN> to choose among:
•Fixture Hours – to display the number of hours the fixture has been powered on
•LED Hours – to display the total LED hours used
•Version – to display the current software version of the fixture
The maximum output is inversely proportional to the run time: The brighter the output, the
less run time available.
When the password protection is activated, the product will prompt for the passcode in
order to access the menu. The passcode is: <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.

16
Operation
Freedom Par T6 User Manual Rev. 1
Factory Reset
To reset the product to factory default settings, follow the instructions below:
1. Press <MENU> repeatedly until Information shows on the display. Press <ENTER>.
2. Use <UP> or <DOWN> to select No (cancel) or Yes (reset) .
3. Press <ENTER>.
Master/Slave Mode
The Master/Slave mode allows a single Freedom Par T6 product (the “master”) to control the actions of
one or more Freedom Par Q9 products (the “slaves”) without the need of a DMX controller. The master
product will be set to operate in Standalone, whereas the slave products will be set to operate in Slave
mode. Once set and connected, the slave products will operate in unison with the master product.
Configure the products as indicated below.
Slave products:
1. Press <MENU> repeatedly until D-Fi Setting shows on the display. Press <ENTER>.
2. Use <UP> or <DOWN> to select D-Fi Mode. Press <ENTER>.
3. Use <UP> or <DOWN> to select Receive. Press <ENTER>.
4. Press <MENU> repeatedly until Slave Setting shows on the display. Press <ENTER>.
5. Use <UP> or <DOWN> to select the slave unit(s), from Slave1–4. Press <ENTER>.
6. Set the DMX address to 001.
7. Set the D-Fi to receive a specific channel, CH01–CH16.
8. Finish setting and connecting all the slave products.
Master product:
1. Set the master product to operate in standalone mode.
2. Set the D-Fi to transmit on the D-Fi channel the slaves are receiving on.
RFC-XL Remote Control
The Freedom Par T6 can be operated with an RFC remote or an RFC-XL remote (sold separately). To
enable RF control, follow the instructions below:
1. Press <MENU> repeatedly until RF Settings shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select among Link (links the fixture to a single RF remote), Public
(enables the fixture to respond to all RF signals), Group (sets which group of fixture the RFC-XL
remote will control), or Off (deactivates RF).
4. Press <ENTER>.
• For more information on how to activate the Freedom Par T6 built-in D-Fi,
see D-Fi Setting.
• All products must be set to the same DMX personality, DMX address, and D-Fi
channel.
• Configure all the slave products before configuring the master to transmit.
• Never connect a DMX controller to a D-Fi channel configured for Master/Slave
operation because the controller may interfere with the signals from the master.
For more information about using an RFC or RFC-XL remote, download the user
manuals from www.chauvetdj.com

17
Freedom Par T6 User Manual Rev. 1
Operation
RFC-XL Remote Control Operation
COLOR PICKER
The color picker can be used to select colors manually instead of cycling through
preset colors. In addition, the color picker can increase or decrease the value of
several functions in the fixture such as the dimmer, pan, or tilt.
To manually select a color or adjust the value of a function:
1. Select function such as <PAN>, <DIMMER>, <COLOR>, <STROBE> or
<FOCUS>.
2. Press any part of the color picker and scroll clockwise or
counterclockwise.
BLACK OUT
To black out the lights of the product:
1. Press <BLACK OUT>. This will turn off all the lights until the button is
pressed again.
AUTO
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1. Press <AUTO>.
2. Press <UP> or <DOWN> to choose between the different auto
programs.
To adjust the speed of the automatic program:
1. Press <SPEED>.
2. Press <UP> or <DOWN> to increase or decrease the speed of the
program.
SOUND
Triggers built in sound programs.
1. Press <SOUND>.
2. Press <SPEED/SENSITIVITY>.
3. Press <UP> or <DOWN> or use the color picker to increase or decrease
the sensitivity.
STROBE
Triggers strobe mode in the fixture.
1. Press <STROBE>.
2. Press <UP> or <DOWN> or use the color picker to adjust the strobe.
DIMMER
Triggers dimmer mode in the fixture.
1. Press <DIMMER>.
2. Press <UP> or <DOWN> or use the color picker to adjust the brightness.
COLOR
The color function cycles through the fixture’s preset colors.
1. Press <COLOR>.
2. Press <COLOR> again or use the color picker to adjust colors.
Note: Does not apply to all fixtures.
FREEZE
To stop all movement and color chasing in all fixtures:
1. Press <FREEZE>.
NOTE: The RF remote will not respond to any inputs when Freeze is activated. If
the product does not respond when a button is pressed, try pressing <FREEZE>.
Freeze may have been activated.
The RFC and RFC-XL remotes will not respond to any inputs when Freeze
or Black Out is activated. If the remote does not respond when a button is
pressed, try pressing <FREEZE> or <BLACK OUT>. You may have
inadvertently activated Freeze or Black Out.
AUTO
FADE
SOUND
SPEED /
SENSITIVITY
STROBE
DIMMER
RED
GREEN
BLUE
AMBER
WHITE
UV
PAN
TILT
COLOR
GOBO PRISM
FOCUS
ZOOM
GOBO
ROTATE
PRISM
ROTATE
FREEZE
GROUP
Black
OUT

18
Technical Specifications
Freedom Par T6 User Manual Rev. 1
6. Technical Specifications
Dimensions and Weight
Freedom Par T6
Note: Dimensions in inches rounded.
Power
Light Source
Photometrics
Thermal
DMX
Ordering
Length Width Height Weight
3.9 in (98 mm) 3.9 in (98 mm) 5.1 in (130 mm) 2.6 lb (1.2 kg)
Power Supply Type Range
External 100-230 VAC, 50/60 Hz
Parameter 120 V, 60 HZ230 V, 50 HZ
Consumption 35 W 35W
Operating current 0.52 A 0.33 A
Type Quantity Color Power Current Lifespan
LED 6 Tri-color RGB 3 W 0.7 A 50,000 hours
Parameter Value
Strobe rate 0 to 27 Hz
Beam angle 13°
Field angle 29°
Illuminance @ 2 m 1,876 lux
Maximum External Temperature Cooling System
104 °F (40 °C) Convection
Input/Output Channel Range
D-Fi 3, 5, or 13
Product Name Item Code UPC Number
Freedom Par T6 03032067 781462224158