Chauvet DJ GOBOZAP User manual

GOBOZAP
User Manual

Table of Contents
Gobozap User Manual Rev. 1
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Unpacking Instructions.................................................................................. 1
Claims ................................................................................................................ 1
Text Conventions .......................................................................................... 1
Symbols ........................................................................................................ 1
Disclaimer ..................................................................................................... 1
Safety Notes.................................................................................................. 2
2. Introduction ................................................................................ 3
Product Overview.......................................................................................... 3
Product Dimensions ...................................................................................... 3
3. Setup ........................................................................................... 4
AC Power ........................................................................................................... 4
Fuse Replacement .................................................................................................. 4
Power linking...................................................................................................... 4
Mounting ....................................................................................................... 5
Orientation.......................................................................................................... 5
Rigging ............................................................................................................... 5
4. Operation .................................................................................... 6
Control Panel Operation................................................................................ 6
Menu Map ..................................................................................................... 6
DMX Personality and Starting Address.............................................................. 6
DMX Channel Assignments and Values ....................................................... 7
Gobos................................................................................................................. 9
Configuration (Standalone) ........................................................................... 10
Automatic Programs........................................................................................... 10
Auto-Program Speed ......................................................................................... 10
Sound-Active Mode............................................................................................ 10
Sound-Sensitivity ............................................................................................... 10
Motor Rotation.................................................................................................... 10
IRC-6 Infrared Remote Control ..................................................................... 11
IRC-6 Operation ................................................................................................. 11
Master/Slave Mode ....................................................................................... 12
5. Maintenance................................................................................ 13
Product Maintenance .................................................................................... 13
6. Technical Specifications ........................................................... 14
Returns............................................................................................ 15
Contact Us ...................................................................................... 16

Page 1 of 17
Gobozap User Manual Rev. 1
Before You Begin
1. Before You Begin
What Is Included
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision; however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetdj.com.
The works of authorship contained in this manual, including, but not limited to, all designs, texts, and
images are owned by Chauvet.
© Copyright 2021 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo, and Gobozap are registered trademarks or trademarks of Chauvet & Sons
LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and
product names and logos referred to herein may be trademarks of their respective companies.
• Gobozap
•Powercord
• Hanging bracket
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
ON A value to be entered or selected
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.

Page 2 of 17
Before You Begin
Gobozap User Manual Rev. 1
Safety Notes
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power cord by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a safety cable.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• Do not charge the battery of the product in a closed case or container.
• Always make sure that the voltage of the outlet to which you are connecting the product is
within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the
product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the hanging/
mounting bracket.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at
higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to damage
or malfunction. Please contact the nearest authorized technical assistance center.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Keep this User Manual for future use. If you sell the product to someone else, be sure that
they also receive this document.

Page 3 of 17
Gobozap User Manual Rev. 1
Introduction
2. Introduction
Product Overview
Product Dimensions
Lens
DMX in/out
Menu buttons
Gobo
wheel
LED display
Fan (2x)
Power in/out
Fuse holder
IR sensor
IR sensor
6.1 in
155 mm
5.1 in
135 mm
19.1 in
485 mm

Page 4 of 17
Setup
Gobozap User Manual Rev. 1
3. Setup
AC Power
The Gobozap has an auto-ranging power supply, and it can work with an input voltage range of 100 to 240
VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring),
use the current value listed on the label affixed to the product’s back panel, or refer to the product’s
specifications chart. The listed current rating indicates the product’s average current draw under normal
conditions.
Fuse Replacement
1. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
2. Pry the fuse holder out of the housing.
3. Remove the blown fuse from the holder, and replace with a fuse of the exact same type and rating
(F 3 A, 250 V).
4. Insert the fuse holder back in place and reconnect power.
Power linking
The product provides power linking via the outlet located in the back of the product. Please see the
diagram below for further explanation.
Power Linking Diagram
• Always connect the product to a protected circuit (e.g., a circuit breaker or
fuse). Make sure the product has an appropriate electrical ground to avoid the
risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, completely
disconnect the product from power via breaker or by unplugging it during
periods of non-use.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Disconnect the multi-charger from the power outlet before replacing the fuse.
You can power link up to 6 Gobozap products on 230 VAC.
The power linking diagram corresponds to the U.K. version of the product ONLY! If using
the product in other markets, you must consult with the local Chauvet distributor, as
power-linking connectors and requirements may differ in your country or region.
Safety cap
Spare fuse holder
(inside safety cap)
Installed fuse
(held by plastic clip)
Additional
products

Page 5 of 17
Gobozap User Manual Rev. 1
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation
The Gobozap may be mounted in any position; however, make sure adequate ventilation is provided
around the product.
Rigging
• Before deciding on a location, always make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure adequate ventilation is provided around the product.
• Make sure that the structure or surface onto which you are mounting the product can support the
product’s weight (see the Technical Specifications).
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, such as an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power-linking cables to reach.
• The bracket adjustment knob allows for directional adjustment when aiming the product to the desired
angle. Only loosen or tighten the bracket knob manually. Using tools could damage the knob.
Mounting Diagram
Mounting bracket
Safety cable
Mounting clamp
Mounting clamp

Page 6 of 17
Operation
Gobozap User Manual Rev. 1
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the Product Overview to see the button locations on the control panel.
Menu Map
DMX Personality and Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product’s channels.
The Gobozap uses up to 12 DMX channels, which defines the highest configurable address as 502.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1. Press<MENU> repeatedly until 2Ch, 7Ch, or 11Ch shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address, from A001–512.
4. Press <ENTER>.
Button Function
<MENU> Press to find an operation mode or to back out of the current menu option
<UP> Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
<ENTER> Press to activate a menu option or a selected value
Mode Programming Levels Description
Address
2Ch
A001–512 Sets the DMX personality7Ch
11Ch
Auto programs P-- auto Auto programs
Auto speed S-- 001–100 Auto programs speed
Sound-active
mode Snd BO Blackout when no sound
SLOW Rotate slow when no sound
Sound sensitivity SENV 001–100 Adjusts sound sensitivity
Infrared mode SET on Turns infrared on or off
off
Master/Slave
mode SLV SLV1 Copies the master unit
SLV2 Slave unit for coordinated show
Motor mot
on Reverses motor rotation
off Normal motor rotation
000–100
Overrides mirror dish rotation speed for auto/
sound only. If this is set to 000, this setting has no
effect on anything. When set to 050, the mirror
dish or gobo will rotate at 50% speed, and the
auto or sound program speed control will adjust
the colors and gobos only.

Page 7 of 17
Gobozap User Manual Rev. 1
Operation
DMX Channel Assignments and Values
2Ch 7Ch 11Ch Function Value Percent/Setting
1 1 1 Auto programs 001 127 Auto mode
128 255 Sound mode
222
Auto speed 000 255 Slow to fast
(activates when Channel 1 is on auto mode)
Sound
sensitivity 000 255 0–100% (activates when Channel 1 is on sound mode)
- 3 3 Dimmer 1 000 255 0–100%
- - 4 Dimmer 2 000 255 0–100%
- 4 5 Shutter 1 000 255 Strobe speed, slow to fast
- - 6 Shutter 2 000 255 Strobe speed, slow to fast
- 5 7 Colour wheel 1
001 004 White
005 009 Red
010 014 Green
015 019 Blue
020 024 Yellow
025 029 Amber
030 034 Pink
035 039 Lime green
040 044 Light blue
045 049 Magenta
050 054 Cyan
055 059 Orange
060 064 UV
065 069 Dark pink
070 074 Dark pink + white
075 079 UV + dark pink
080 084 Orange + UV
085 089 Cyan + orange
090 094 Magenta + cyan
095 099 Light blue + magenta
100 104 Lime green + light blue
105 109 Pink + lime green
110 114 Amber + pink
115 119 Yellow + amber
120 124 Blue + yellow
125 129 Green + blue
130 134 Red + green
135 139 White + red
140 197 Clockwise scroll, fast to slow
198 255 Counterclockwise scroll, slow to fast

Page 8 of 17
Operation
Gobozap User Manual Rev. 1
- - 8 Colour wheel 2
001 004 White
005 009 Red
010 014 Green
015 019 Blue
020 024 Yellow
025 029 Amber
030 034 Pink
035 039 Lime green
040 044 Light blue
045 049 Magenta
050 054 Cyan
055 059 Orange
060 064 UV
065 069 Dark pink
070 074 Dark pink + white
075 079 UV + dark pink
080 084 Orange + UV
085 089 Cyan + orange
090 094 Magenta + cyan
095 099 Light blue + magenta
100 104 Lime green + light blue
105 109 Pink + lime green
110 114 Amber + pink
115 119 Yellow + amber
120 124 Blue + yellow
125 129 Green + blue
130 134 Red + green
135 139 White + red
140 197 Clockwise scroll, fast to slow
198 255 Counterclockwise scroll, slow to fast
-69
Gobo wheel 1
(see Gobos)
001 009 Gobo 1
010 019 Gobo 2
020 029 Gobo 3
030 039 Gobo 4
040 049 Gobo 5
050 059 Gobo 6
060 069 Gobo 7
070 079 Gobo 8
080 089 Gobo 9
090 099 Gobo 10
100 109 Gobo 11
110 119 Gobo 12
120 129 Gobo 13
130 139 Gobo 14
140 197 Clockwise scroll, fast to slow
198 255 Counterclockwise scroll, slow to fast
2Ch 7Ch 11Ch Function Value Percent/Setting

Page 9 of 17
Gobozap User Manual Rev. 1
Operation
Gobos
--10
Gobo wheel 2
(see Gobos)
001 009 Gobo 1
010 019 Gobo 2
020 029 Gobo 3
030 039 Gobo 4
040 049 Gobo 5
050 059 Gobo 6
060 069 Gobo 7
070 079 Gobo 8
080 089 Gobo 9
090 099 Gobo 10
100 109 Gobo 11
110 119 Gobo 12
120 129 Gobo 13
130 139 Gobo 14
140 197 Clockwise scroll, fast to slow
198 255 Counterclockwise scroll, slow to fast
- 7 11 Barrel rotation
001 042 Stop
043 086 Counterclockwise rotation, slow to fast
087 129 Stop
130 173 Clockwise rotation, slow to fast
174 217 Stop
218 255 Alternating clockwise-counterclockwise rotation,
slow to fast
2Ch 7Ch 11Ch Function Value Percent/Setting
1
2
3
4
5
6
7
8
9
10
11
12
13
14

Page 10 of 17
Operation
Gobozap User Manual Rev. 1
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Automatic Programs
To run the Gobozap in automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Select auto.
4. Press <ENTER>.
Auto-Program Speed
To change the auto-program speed on the Gobozap, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the program speed, from S 001–100.
3. Press <ENTER>. The product will return to the last selected mode.
Sound-Active Mode
To run the Gobozap in sound-active mode, follow the instructions below:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to choose between BO (blackout when no sound is detected) and SLOW
(rotate slowly when no sound is detected).
4. Press <ENTER>.
Sound-Sensitivity
To set the sound sensitivity on the Gobozap, do the following:
1. Press <MENU> repeatedly until SENV shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the sound sensitivity, from 001–100.
3. Press <ENTER>. The product will return to the last selected mode.
Motor Rotation
To set the motor rotation settings on the Gobozap, follow the instructions below:
1. Press <MENU> repeatedly until mot shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to choose between on (reverses motor rotation) and off (normal motor
rotation).
4. Use <UP> or <DOWN> to choose between 000–100 to override the speed of the mirror rotation in
auto mode or sound-active mode (000 has no function; When set to 050, the mirror dish or gobo
will rotate at 50% speed, and the auto or sound program speed control will adjust the colors and
gobos only).
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
The product will only respond to low frequencies of music (bass and drums).

Page 11 of 17
Gobozap User Manual Rev. 1
Operation
IRC-6 Infrared Remote Control
The Gobozap is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode,
follow the instructions below:
1. Press <MENU> repeatedly until SEt shows on the display.
2. Press <ENTER> to accept.
3. Press <UP> or <DOWN> to select on or off.
4. Press <ENTER>.
IRC-6 Operation
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1. Press <AUTO> on the IRC-6.
2. Press <+> or <–> to choose between the different auto programs.
To adjust the speed of the automatic program:
1. Press <SPEED> on the IRC-6.
2. Press <+> or <–> to increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
1. Press <SOUND> on the IRC-6.
2. Press <+> or <–> to select a sound-active program.
To adjust the sound sensitivity:
1. Press <SENSITIVITY> on the IRC-6.
2. Press <+> or <–> to increase or decrease the sensitivity.
Strobe
To adjust the strobe rate:
1. Press <STROBE> on the IRC-6.
2. Press <+> or <–> to increase or decrease the strobe rate.
3. Press <STROBE> again to turn off the strobe.
Black Out
To black out the lights:
1. Press <BLACK OUT> on the IRC-6.
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing <BLACK OUT>.
You may have inadvertently activated Black Out.

Page 12 of 17
Operation
Gobozap User Manual Rev. 1
Master/Slave Mode
The Master/Slave mode allows a single Gobozap product (the “master”) to control the actions of one or
more Gobozap products (the “slaves”) without the need of a DMX controller or DMX cables. The master
(transmitter) product will be set to operate in either Standalone mode or with the IRC-6, while the slave
(receiver) products will be set to operate in Slave mode. Once set and connected, the slave products will
operate in unison with the master product.
Configure the products as indicated below.
Slave products:
1. Press <MENU> repeatedly until SLV shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select SLV2.
4. Press <ENTER>.
5. Finish setting all the slave products.
Master product:
1. Press <MENU> repeatedly until SLV shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select SLV1.
4. Press <ENTER>.
5. Set the master product to operate in Standalone mode or with the IRC-6.
• Configure all the slave products before connecting the master to the daisy chain.
• Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller may interfere with the signals from the master.

Page 13 of 17
Gobozap User Manual Rev. 1
Maintenance
5. Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean
your lighting products at least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens-cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.

Page 14 of 17
Technical Specifications
Gobozap User Manual Rev. 1
6. Technical Specifications
Dimensions and Weight
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Light Source
Colors and Gobos
Thermal
DMX
Ordering
Length Width Height Weight
19.1 in (485 mm) 5.1 in (130 mm) 6.1 in (155 mm) 13.2 lb (6 kg)
Power Supply Type Range Voltage Selection Input Voltage
Switching (external) 100 to 240 VAC, 47/63 Hz Auto-ranging 8.4 VDC, 1.3 A
Parameter 230 V, 50 Hz
Consumption 176 W
Operating current 1.3 A
Power I/O U.S./Worldwide UK/Europe
Power input connector IEC IEC
Power cord plug Edison (U.S.) Local plug
Type Color Quantity Power Current Lifespan
LED Cool white 2 90 W 3.6 A 50,000 hours
Colors Gobos
13 (red, green, blue, yellow, amber, pink,
lime green, light blue, magenta, cyan, orange, UV,
dark pink) + white, split colors,
continuous scroll at various speeds
14 (metal) + open,
continuous scroll at variable speeds
Maximum External Temperature Cooling System
104 °F (40 °C) Convection
I/O Connector Channel Range
3-pin XLR 2, 7, or 11
Product Name Item Code UPC Number
Gobozap 07051825 781462221737

Page 15 of 16
Gobozap User Manual Rev. 1
Returns
Returns
In case you need to get support or return a product:
• If you are located in the U.S., contact Chauvet World Headquarters.
• If you are located in the U.K. or Ireland, contact Chauvet Europe Ltd.
• If you are located in Benelux, contact Chauvet Europe BVBA.
• If you are located in France, contact Chauvet France.
• If you are located in Germany, contact Chauvet Germany.
• If you are located in Mexico, contact Chauvet Mexico.
• If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local
distributor. See www.chauvetdj.com for distributors outside the U.S., U.K., Ireland, Benelux,
France, Germany, or Mexico.
Call the corresponding Chauvet Technical Support office and request a Return Merchandise Authorization
(RMA) number before shipping the product. Be prepared to provide the model number, serial number, and
a brief description of the cause for the return.
To submit a service request online, go to www.chauvetdj.com/service-request.
Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet
will not issue call tags.
Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA
number.
Before sending the product, clearly write the following information on a piece of paper and place it inside
the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be
your responsibility. FedEx packing or double-boxing are recommended.
If you are located outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico,
contact your distributor of record and follow their instructions on how to return Chauvet
products to them. Visit our website www.chauvetdj.com for contact details.
Write the RMA number on a properly affixed label. DO NOT write the RMA number
directly on the box.
Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).

Page 16 of 16
Contact Us
Gobozap User Manual Rev. 1
Contact Us
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Fol-
low the instructions to request support or to return a product. Visit our website for contact details.
General Information Technical Support
World Headquarters
Address: 5200 NW 108th Ave. Voice: [phone]
Sunrise, FL 33351 Fax: [phone]
Voice: [phone] Email: [email protected]
Fax: [phone]
Toll Free: [phone] Website: www.chauvetdj.com
UK
Address: Unit 1C Email: [email protected]
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK Website: www.chauvetdj.eu
NG16 6NT
Voice: [phone]
Fax: [phone]
Benelux
Address: Stokstraat 18 Email: [e-mail]
9770 Kruishoutem
Belgium Website: www.chauvetdj.eu
Voice: [phone]
France
Address: 3, Rue Ampère
91380 Chilly-Mazarin
Email: [email protected]
France Website: www.chauvetdj.eu
Voice: [phone]
Germany
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Email: [email protected]
Germany Website: www.chauvetdj.eu
Voice: [phone]
Mexico
Address: Av. de las Partidas 34 - 3B
(Entrance by Calle 2)
Email: [email protected]
Zona Industrial Lerma Website: www.chauvetdj.mx
Lerma, Edo. de México, CP 52000
Voice: [phone]