Chauvet DJ SHOCKER PANEL FX User manual

User Manual

Shocker Panel FX User Manual Rev. 1
Edition Notes
The Shocker Panel FX User Manual includes a description, safety precautions, installation, programming,
operation, and maintenance instructions for the Shocker Panel FX as of the release date of this edition.
Trademarks
Chauvet, Chauvet DJ, the Chauvet logo, and Shocker are registered trademarks or trademarks of Chauvet
& Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other
company and product names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all designs, text, and
images are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage, or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident, or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision; however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetdj.com.
Document Revision
Go to www.chauvetdj.com for the latest version.
Revision Date Description
1 10/2023 Initial release

Shocker Panel FX User Manual Rev. 1
Table of Contents
TABLE OF CONTENTS
1. Before You Begin ............................................................................... 1
What Is Included ........................................................................................... 1
Unpacking Instructions.................................................................................. 1
Claims ................................................................................................................ 1
Text Conventions .......................................................................................... 1
Symbols ........................................................................................................ 1
Safety Notes.................................................................................................. 2
2. Introduction......................................................................................... 3
Product Overview.......................................................................................... 3
Product Dimensions ...................................................................................... 3
3. Setup.................................................................................................... 4
AC Power...................................................................................................... 4
Fuse Replacement ............................................................................................. 4
Power Linking..................................................................................................... 4
Mounting ....................................................................................................... 5
Orientation.......................................................................................................... 5
Rigging ............................................................................................................... 5
4. Operation............................................................................................. 6
Control Panel Operation................................................................................ 6
Menu Map ..................................................................................................... 6
DMX Configuration........................................................................................ 7
Personality and Starting Address....................................................................... 7
DMX Charts........................................................................................................ 7
Standalone Configuration.............................................................................. 12
Static Colors....................................................................................................... 12
Automatic Programs........................................................................................... 12
Automatic Speed................................................................................................ 12
Dimmer............................................................................................................... 12
Dimmer Curve .................................................................................................... 12
DMX Loss........................................................................................................... 12
Sound-Active Mode............................................................................................ 12
Sound Sensitivity................................................................................................ 13
Custom Color Mixing.......................................................................................... 13
Wired Master/Slave Mode............................................................................. 13
5. Maintenance........................................................................................ 14
Product Maintenance .................................................................................... 14
6. Technical Specifications.................................................................... 15
Contact Us............................................................................................... 16
Warranty & Returns....................................................................................... 16

1
Before You Begin
Shocker Panel FX User Manual Rev. 1
1. Before You Begin
What Is Included
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate a claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
• Shocker Panel FX
• Power cable
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
ON A value to be entered or selected
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to the
product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.

2
Shocker Panel FX User Manual Rev. 1
Before You Begin
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the
Shocker Panel FX.
■ALWAYS:
♦Connect to a grounded circuit.
♦Connect to operating voltages as specified on the product's spec sticker.
♦Disconnect from power before replacing the fuse.
♦Disconnect from its power source during periods of inactivity.
♦Use a safety cable when suspending overhead.
♦Heed all restrictions and warnings on the spec sticker.
♦Mount in a location with at least 20 in (50 cm) of ventilation.
♦Replace the fuse with the same type and rating.
♦Use a clamp with a captive bolt when a single hanging bracket is used.
■In the event of a serious operating problem, stop using immediately.
■DO NOT:
♦Open this product or attempt any repairs. It contains no user-serviceable parts.
♦Look at the light source when the product is on.
♦Use if the power cord is crimped or damaged.
♦Disconnect by pulling on the power cord.
♦Allow flammable materials close to the product when it is operating.
♦Block any ventilation holes/slots in the housing.
♦Connect to a dimmer or rheostat.
♦Carry the product by its power cord.
♦Operate in temperatures higher than 104°F (40°C).
♦Expose to environments that exceed the Ingress Protection (IP) rating.
♦Expose to rain or moisture.
♦Use outdoors.
♦Leave outdoors for extended periods of time.
♦Expose to corrosive environmental conditions such as temperature, humidity, salinity,
pressure, radiation, or shock.
♦Set this product on a flammable surface.
Keep this User Manual for future use. If the product is sold to someone else, be sure that
they also receive this document.

3
Introduction
Shocker Panel FX User Manual Rev. 1
2. Introduction
Product Overview
Product Dimensions
Fuse
holder Power
in/ out
Microphone
LED
display
Menu
buttons
Safety cable
pass-through DMX
in/ out
12.2 in
310 mm
6.7 in
170 mm
4.3 in
110 mm 12.7 in
323 mm

4
Shocker Panel FX User Manual Rev. 1
Setup
3. Setup
AC Power
The Shocker Panel FX has an auto-ranging power supply and it can work with an input voltage range of
100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current
value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
5. Insert the fuse holder back in place and reconnect power.
Power Linking
This product provides power linking via the outlet located in the back of the product. See the diagram
below for further explanation.
Power Linking Diagram
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or
fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Disconnect the product from the power outlet before replacing the fuse.
Always replace a blown fuse with one of the same type and rating.
It is possible to link up to 5 Shocker Panel FX products on 120 VAC or up to 10 products
on 230 VAC.
The power linking diagram shown above corresponds to the North American version of
the product ONLY! If using the product in other markets, consult with the local Chauvet
distributor as power linking connectors and requirements may differ by country or region.
Safety cap
Spare fuse holder
(inside safety cap)
Installed fuse
(held by plastic clip)
Power
source
1st product
2nd product
3rd product
Additional
products

5
Setup
Shocker Panel FX User Manual Rev. 1
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation
The Shocker Panel FX may be mounted in any position; however, make sure adequate ventilation is
provided around the product.
Rigging
• Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and programming.
•Make sure that the structure and attachment points can support the weight before hanging the
product (see the Technical Specifications).
•When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, such as an elevated platform or a truss.
•When rigging the product onto atruss, use a mounting clamp of appropriate weight capacity.
•The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
•When power linking multiple products, mount the products close enough for power linking cables to
reach.
•When mounting the product on the floor, make sure that the product and cables are away from
people and vehicles.
Mounting Diagram
To prevent accidental loosening when using a single mounting clamp, be sure to use a
clamp with a captive bolt.
Safety cable
(such as CH-05
from Chauvet)
Safety cable
pass-through
Mounting clamp
(such as CLP-15N
from Chauvet)
Hanging
bracket
Bracket
adjustment knobs

6
Shocker Panel FX User Manual Rev. 1
Operation
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the Product Overview to see the button locations on the control panel.
Menu Map
Refer to the Shocker Panel FX product page on www.chauvetdj.com for the latest menu map.
Button Function
<MENU> Press to find an operation mode or to back out of the current menu option
<UP> Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
<ENTER> Press to activate a menu option or a selected value
Mode Programming Levels Description
DMX Mode
8Ch
d001–512
8-channel DMX mode
18Ch 18-channel DMX mode
34Ch 34-channel DMX mode
47Ch 47-channel DMX mode
Static Colors C-- C001–015 Static colors
Programs P-- P 001–040 Automatic programs
Auto Speed S-- S001–100 Program speed for P 1–40
Dimmer dIn L000-L255 Dimmer for P1-40
Dimmer
Curve dCur
oFF Dimmer off
Cur 1 Dimmer speed 1
Cur 2 Dimmer speed 2
Cur 3 Dimmer speed 3
DMX Loss LoSS
hoLd Holds the last setting when the signal is lost
Auto Sets the product to automatic mode when
signal is lost
Soun Sets the product to sound mode when the
signal is lost
bLAC Blacks out the product when signal is lost
Sound Mode Snd Sn00–Sn30 Sound-active program, slow down without
sound
Sensitivity SEnS u001–100 Sets sound sensitivity
Custom
Color Mixing U--
r0–255
Custom static colors
Combine red, green, blue, and white
G0–255
b0–255
U0–255

7
Operation
Shocker Panel FX User Manual Rev. 1
DMX Configuration
The Shocker Panel FX works with a DMX controller. Information about DMX is in the CHAUVET DMX
Primer, which is available from the Chauvet website chauvetlighting.com/downloads/
DMX_Primer_rev05_WO.pdf.
Personality and Starting Address
The Shocker Panel FX uses up to 47 DMX channels in the 47Ch DMX mode, which defines the highest
configurable/recommended address to 466.
When selecting a starting DMX address, always consider the number of DMX channels the DMX mode
uses. If the starting address is set too high, access to some channels could be restricted.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the personality and starting address, do the following:
1. Press <MENU> repeatedly until 8Ch, 18Ch, 34Ch, or 47Ch shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address, from d001–512.
4. Press <ENTER>.
DMX Channel Assignments and Values
DMX Charts
8Ch 18Ch 34Ch 47Ch Function Value Percent/Setting
1111Masterdimmer 000255 0–100%
–2–2RGBdimmer 000255 0–100%
33––Red 000255 0–100%
44––Green 000255 0–100%
55––Blue 000255 0–100%
26–3RGBstrobe 000 005 No function
006 255 RGB strobe, slow to fast
6–––White 000255 0–100%

8
Shocker Panel FX User Manual Rev. 1
Operation
–7–4RGBprogram
000 005 No function
006 012 Auto program 1
013 018 Auto program 2
019 025 Auto program 3
026 031 Auto program 4
032 038 Auto program 5
039 044 Auto program 6
045 050 Auto program 7
051 057 Auto program 8
058 063 Auto program 9
064 070 Auto program 10
071 076 Auto program 11
077 082 Auto program 12
083 089 Auto program 13
090 095 Auto program 14
096 102 Auto program 15
103 108 Auto program 16
109 114 Auto program 17
115 121 Auto program 18
122 127 Auto program 19
128 134 Auto program 20
135 140 Auto program 21
141 147 Auto program 22
148 153 Auto program 23
154 159 Auto program 24
160 166 Auto program 25
167 172 Auto program 26
173 179 Auto program 27
180 185 Auto program 28
186 191 Auto program 29
192 198 Auto program 30
199 204 Auto program 31
205 211 Auto program 32
212 217 Auto program 33
218 223 Auto program 34
224 230 Auto program 35
231 236 Auto program 36
237 243 Auto program 37
244 249 Auto program 38
250 255 Auto program 39
–8–5
RGB program speed
(When Ch. 7 or 4 are
006255)000 255 RGB program speed, slow to fast
–9–6
Color macro
(When Ch. 7 or 4 are
006255)
000 005 No function
006 255 Mixed colors
8Ch 18Ch 34Ch 47Ch Function Value Percent/Setting

9
Operation
Shocker Panel FX User Manual Rev. 1
–10– 7
Background color
(When Ch. 7 or 4 are
006255)
000 005 No function
006 255 mixed colors
– 11 – 8 Background color dimmer 000 255 100–0%
– 12 – 9 White dimmer 000 255 0–100%
– 13 – 10 White strobe 000 005 No function
006 255 White strobe, slow to fast
–14–11Whiteprogram
000 005 No function
006 014 Auto program 1
015 022 Auto program 2
023 030 Auto program 3
031 039 Auto program 4
040 047 Auto program 5
048 055 Auto program 6
056 064 Auto program 7
065 072 Auto program 8
073 080 Auto program 9
081 089 Auto program 10
090 097 Auto program 11
098 105 Auto program 12
106 114 Auto program 13
115 122 Auto program 14
123 130 Auto program 15
131 139 Auto program 16
140 147 Auto program 17
148 155 Auto program 18
156 164 Auto program 19
165 172 Auto program 20
173 180 Auto program 21
181 189 Auto program 22
190 197 Auto program 23
198 205 Auto program 24
206 214 Auto program 25
215 222 Auto program 26
223 230 Auto program 27
231 239 Auto program 28
240 247 Auto program 29
248 255 Auto Program 30
–15–12
White program speed
(When Ch. 14 or 11 are
006255)
000 255 White program speed, slow to fast
8Ch 18Ch 34Ch 47Ch Function Value Percent/Setting

10
Shocker Panel FX User Manual Rev. 1
Operation
7 16 – 13 RGBW program
000 005 No function
006 012 Auto program 1
013 018 Auto program 2
019 025 Auto program 3
026 031 Auto program 4
032 038 Auto program 5
039 044 Auto program 6
045 050 Auto program 7
051 057 Auto program 8
058 063 Auto program 9
064 070 Auto program 10
071 076 Auto program 11
077 082 Auto program 12
083 089 Auto program 13
090 095 Auto program 14
096 102 Auto program 15
103 108 Auto program 16
109 114 Auto program 17
115 121 Auto program 18
122 127 Auto program 19
128 134 Auto program 20
135 140 Auto program 21
141 147 Auto program 22
148 153 Auto program 23
154 159 Auto program 24
160 166 Auto program 25
167 172 Auto program 26
173 179 Auto program 27
180 185 Auto program 28
186 191 Auto program 29
192 198 Auto program 30
199 204 Auto program 31
205 211 Auto program 32
212 217 Auto program 33
218 223 Auto program 34
224 230 Auto program 35
231 236 Auto program 36
237 243 Auto program 37
244 249 Auto program 38
250 255 Auto program 39
817–14
RGBW program speed
(When Ch. 7, 16, or 13 are
006255)
000 255 RGBW program speed, slow to fast
– – 2 15 Red 1 000 255 0–100%
– – 3 16 Green 1 000 255 0–100%
– – 4 17 Blue 1 000 255 0–100%
– – 5 18 Red 2 000 255 0–100%
8Ch 18Ch 34Ch 47Ch Function Value Percent/Setting

11
Operation
Shocker Panel FX User Manual Rev. 1
– – 6 19 Green 2 000 255 0–100%
– – 7 20 Blue 2 000 255 0–100%
– – 8 21 Red 3 000 255 0–100%
– – 9 22 Green 3 000 255 0–100%
– – 10 23 Blue 3 000 255 0–100%
– – 11 24 Red 4 000 255 0–100%
– – 12 25 Green 4 000 255 0–100%
– – 13 26 Blue 4 000 255 0–100%
– – 14 27 Red 5 000 255 0–100%
– – 15 28 Green 5 000 255 0–100%
– – 16 29 Blue 5 000 255 0–100%
– – 17 30 Red 6 000 255 0–100%
– – 18 31 Green 6 000 255 0–100%
– – 19 32 Blue 6 000 255 0–100%
– – 20 33 Red 7 000 255 0–100%
– – 21 34 Green 7 000 255 0–100%
– – 22 35 Blue 7 000 255 0–100%
– – 23 36 Red 8 000 255 0–100%
– – 24 37 Green 8 000 255 0–100%
– – 25 38 Blue 8 000 255 0–100%
– – 26 39 White 1 000 255 0–100%
– – 27 40 White 2 000 255 0–100%
– – 28 41 White 3 000 255 0–100%
– – 29 42 White 4 000 255 0–100%
– – 30 43 White 5 000 255 0–100%
– – 31 44 White 6 000 255 0–100%
– – 32 45 White 7 000 255 0–100%
– – 33 46 White 8 000 255 0–100%
– 183447Mode
000 025 Dim Curve Off
026 050 Dim Curve 1
051 075 Dim Curve 2
076 100 Dim Curve 3
101 125 Dime set by unit display
126 150 RESET Fixture
8Ch 18Ch 34Ch 47Ch Function Value Percent/Setting

12
Shocker Panel FX User Manual Rev. 1
Operation
Standalone Configuration
Set the product in one of the standalone modes to operate without a DMX controller.
Static Colors
To run the Shocker Panel FX in Preset Color mode, follow the instructions below:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select C001-015.
4. Press <ENTER>.
Automatic Programs
To run the Shocker Panel FX in Automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select P001–040.
4. Press <ENTER>.
Automatic Speed
To set the program speed, follow the instructions below:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the program speed, from S001–100.
4. Press <ENTER>.
Dimmer
To adjust the dimmer, follow the instructions below:
1. Press <MENU> repeatedly until dIn shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the dimmer, from L000–L255.
4. Press <ENTER>.
Dimmer Curve
To adjust the dimmer speed on the Shocker Panel FX, follow the instructions below:
1. Press <MENU> repeatedly until dCur shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select oFF,Cur1,Cur2, or Cur3.
4. Press <ENTER>.
DMX Loss
To set the DMX Loss mode on the Shocker Panel FX, follow the instructions below:
1. Press <MENU> repeatedly until LoSS shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select how the product responds when no sound is detected, from hoLd
(holds the last setting), Auto (sets the unit to auto mode), Soun (sets the unit to sound mode), or
bLAC (blacks out the product).
4. Press <ENTER>.
Sound-Active Mode
To run the Shocker Panel FX in sound-active mode, follow the instructions below.
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
3. Press <UP> or <DOWN> to select from Sn00–Sn30.
4. Press <ENTER>.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.

13
Operation
Shocker Panel FX User Manual Rev. 1
Sound Sensitivity
To set the sound sensitivity of the product, do the following:
1. Press <MENU> repeatedly until SEnS shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the sound sensitivity, from U001–100.
4. Press <ENTER>.
Custom Color Mixing
To run the Shocker Panel FX with a custom static color, follow the instructions below.
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER>.
3. Press <ENTER> to cycle through the options, r_ _ _ (red), G_ _ _ (green), b_ _ _ (blue), and U_ _
_(white).
4. Use <UP> or <DOWN> to increase or decrease the selected value from 000–255.
5. Repeat steps 3-4 until the product output is set as desired.
Wired Master/Slave Mode
The Master/Slave mode allows a single Shocker Panel FX product (the “master”) to control the actions of
one or more Shocker Panel FX products (the “slaves”) without the need of a DMX controller. The master
product will be set to operate in either standalone mode or with the IRC-6, while the slave products will be
set to operate in slave mode. Once set and connected, the slave products will operate in unison with the
master product.
Configure the products as indicated below.
Slave products:
1. Press <MENU> repeatedly until ___ shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to set the starting address to ___1.
4. Press <ENTER>.
5. Connect the DMX input of the first slave product to the DMX output of the master product.
6. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave
product.
7. Finish setting and connecting all the slave products.
Master product:
1. Set the master product to operate in standalone mode or with the IRC-6.
2. Make the master product the first product in the DMX daisy chain.
• Configure all the slave products before connecting the master to the daisy chain.
• Never connect a DMX controller to a DMX string configured for Master/Slave operation
because the controller may interfere with the signals from the master.
• Do not connect more than 31 slaves to the master.

14
Shocker Panel FX User Manual Rev. 1
Maintenance
5. Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean
all lighting products at least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.

15
Technical Specifications
Shocker Panel FX User Manual Rev. 1
6. Technical Specifications
Dimensions and Weight
Note: Dimensions in inches are rounded.
Power
Light Source
Photometrics
Thermal
DMX
Ordering
Length Width Height Weight
12.63 in (310 mm) 4.3 in (110 mm) 6.7 in (170 mm) 8.6 lb (3.9 kg)
Power Supply Type Range Voltage Selection
Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging
Parameter 120 V, 60 Hz 230 V, 50 Hz
Consumption 296 W 281 W
Operating Current 2.5 A 1.3 A
Power linking current (products) 8 A (5 products) 8 A (10 products)
Fuse F3 A, 250 V F3 A, 250 V
Power I/O U.S./Worldwide UK/Europe
Power input connector IEC IEC
Power output connector Edison IEC
Power cable plug Edison (U.S.) Local Plug
Type Color Quantity Power Current Lifespan
LED
Tri-color (RGB) 480 2 W 1 A 50,000 hours
Type Color Quantity Power Current Lifespan
LED
Cool white 32 1.1 W 0.4 A 50,000 hours
Strobe Rate Beam Angle Field Angle Illuminance Lumens
0 to 20 Hz 119° 158° 1,131° lux @ 2m 13,626
Maximum External Temperature Cooling System
104 °F (40 °C) Convection
I/O Connector Channel Range
3-pin XLR 8, 18, 34, or 47
Product Name Item Code UPC Number
Shocker Panel FX 07052191 781462225223

16
Shocker Panel FX User Manual Rev. 1
Contact Us
Contact Us
Warranty & Returns
For warranty terms and conditions and return information, please visit our website.
For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,
France, and Germany: www.chauvetlighting.eu/warranty-registration.
General Information Technical Support
Chauvet World Headquarters
Address: 3360 Davie Rd. Voice: [phone]
Davie, FL 33314 Fax: [phone]
Voice: [phone] Email: [email protected]
Fax: [phone]
Toll Free: [phone] Website: www.chauvetdj.com
Chauvet U.K.
Address: Pod 1 EVO Park Email: [email protected]
Little Oak Drive, Sherwood Park
Nottinghamshire, NG15 0EB Website: www.chauvetdj.eu
UK
Voice: [phone]
Fax: [phone]
Chauvet Benelux
Address: Stokstraat 18 Email: BN[email protected]
9770 Kruishoutem
Belgium Website: www.chauvetdj.eu
Voice: [phone]
Chauvet France
Address: 3, Rue Ampère Email: [email protected]
91380 Chilly-Mazarin
France Website: www.chauvetdj.eu
Voice: [phone]
Chauvet Germany
Address: Bruno-Bürgel-Str. 11 Email: [email protected]
28759 Bremen
Germany Website: www.chauvetdj.eu
Voice: [phone]
Chauvet Mexico
Address: Av. de las Partidas 34 - 3B Email: [email protected]
(Entrance by Calle 2)
Zona Industrial Lerma Website: www.chauvetdj.mx
Lerma, Edo. de México, CP 52000
Voice: [phone]