Chevrolet 2011 Cruze User manual

Black plate (1,1)
Chevrolet Cruze Navigation System - 2011
2011 Chevrolet Cruze Navigation System M
Infotainment System . . . . . . 3
Introduction ................. 3
Overview . . . . . . . . . . . . . . . . . . . . . . . 4
Using the System . . . . . . . . . . . . . 12
Radio ....................... 12
AM-FM Radio . . . . . . . . . . . . . . . . . 12
Satellite Radio . . . . . . . . . . . . . . . . 17
Audio Players ............. 18
CD/DVD Player . . . . . . . . . . . . . . . 18
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Hard Drive Device (HDD) . . . . . 26
Auxiliary Devices . . . . . . . . . . . . . . 39
Navigation ................. 39
Using the Navigation
System . . . . . . . . . . . . . . . . . . . . . . 39
Maps . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Navigation Symbols . . . . . . . . . . . 45
Destination .................... 50
OnStar
®
Destination
Download . . . . . . . . . . . . . . . . . . . . 63
Configure Menu . . . . . . . . . . . . . . . 65
Global Positioning
System (GPS) . . . . . . . . . . . . . . . 75
Vehicle Positioning . . . . . . . . . . . . 75
Problems with Route
Guidance . . . . . . . . . . . . . . . . . . . . 76
If the System Needs
Service . . . . . . . . . . . . . . . . . . . . . . 77
Ordering Map DVDs . . . . . . . . . . 77
Database Coverage
Explanations . . . . . . . . . . . . . . . . . 77
Voice Recognition . . . . . . . . 77
Phone ...................... 87
Bluetooth . . . . . . . . . . . . . . . . . . . . . 87
Trademarks and License
Agreements ............. 104
Index ..................... i-1

Black plate (2,1)
Chevrolet Cruze Navigation System - 2011

Black plate (3,1)
Chevrolet Cruze Navigation System - 2011
Infotainment System 3
Introduction
GENERAL MOTORS, GM, the GM
Emblem, CHEVROLET, and the
name Cruze are registered
trademarks of General Motors LLC.
The information in this manual
supplements the owner manual.
This manual describes features that
may or may not be on your specific
vehicle either because they are
options that you did not purchase or
due to changes subsequent to the
printing of this owner manual.
Please refer to the purchase
documentation relating to your
specific vehicle to confirm each of
the features found on your vehicle.
For vehicles first sold in Canada,
substitute the name “General
Motors of Canada Limited”for
Chevrolet wherever it appears in
this manual.
Keep this manual with the owner
manual in the vehicle, so it will be
there if it is needed. If the vehicle is
sold, leave this manual in the
vehicle.
Canadian Vehicle Owners
(Propriétaires des Véhicules
Canadiens)
A French language copy of this
manual can be obtained from your
dealer or from:
On peut obtenir un exemplaire de
ce guide en français auprès du
concessionnaire ou à l'adresse
suivante:
Helm, Incorporated
P.O. Box 07130
Detroit, MI 48207
1-800-551-4123
Numéro de poste 6438 de langue
française
www.helminc.com
Litho in U.S.A.
Part No. 20959597 B Second Printing ©2010 General Motors LLC. All Rights Reserved.

Black plate (4,1)
Chevrolet Cruze Navigation System - 2011
4 Infotainment System
Overview
Read this manual thoroughly to
become familiar with how the
navigation system operates.
All functions are available when the
vehicle is parked. Before driving:
.Become familiar with the
navigation system operation and
the buttons and knobs on the
faceplate of the navigation
system.
.Set up the audio by presetting
favorite stations, setting the
tone, and adjusting the
speakers.
.Set up the navigation features
before beginning to drive, such
as entering an address or a
preset destination.
.For vehicles with phone
capability, set up phone numbers
in advance so they can be called
with the press of a single button
or a single voice command.
{WARNING
Taking your eyes off the road too
long or too often while using the
navigation system could cause a
crash resulting in injury or death
to you or others. Focus your
attention on driving.
{WARNING
Avoid looking too long or too
often at the moving map on the
navigation screen. This could
cause a crash and you or others
can be injured or killed. Use the
turn-by-turn voice guidance
directions whenever possible.
Use the navigation system to:
.Plan a route by selecting a
destination using the various
methods and choices.
.Follow turn-by-turn instructions
and map guidance with voice
prompts, when permitted by
traffic laws, controls, and
conditions.
.Receive RDS broadcast
announcements.

Black plate (5,1)
Chevrolet Cruze Navigation System - 2011
Infotainment System 5
Always be alert and obey traffic and
roadway laws and instructions,
regardless of the guidance from the
navigation system. Because the
navigation system uses street map
information that does not include all
traffic restrictions or the latest road
changes, it could suggest using a
road that is now closed for
construction or a turn that is
prohibited by signs at the
intersection. Because the system
uses limited information, always
evaluate whether following the
system's directions is safe and legal
for the current conditions.
When the navigation system is
turned on, a screen might appear
with the information below. Read
and acknowledge the information it
contains.
If the Caution screen appears,
select the OK screen button by
pressing preset 6 located on the
faceplate. If NAV or DEST buttons
are pressed, this Caution screen
appears and the preset 6 button
must be pressed to access NAV and
DEST functions. See instructions
later in this section.
To get started, set preferences or
delete information from the
navigation system using various
options. See “Deleting Personal
Information”later for more
information.
Navigation System Overview
The navigation system in the vehicle
is not a touch screen system. It is
controlled by using the MENU or
MENU/SEL knob, eight-way selector
arrows, preset buttons, and other
buttons on the faceplate.
The eight-way selector arrows can
be pressed from side to side, up,
or down to navigate through many
of the menus. The MENU or MENU/
SEL knob can be turned and then
pressed to complete any of the
highlighted screen functions.
The preset buttons can be pressed
to select the appropriate screen
button function as shown on the
display.
See “Navigation Buttons”under
Using the Navigation System on
page 39 for more information.

Black plate (6,1)
Chevrolet Cruze Navigation System - 2011
6 Infotainment System
A. DEST (Destination)
B. Eight-Way Selector Arrows
C. Preset Buttons (1–6)
D. NAV (Navigation)
E. REC (Record)
F. CONFIG (Configuration)
G. CLOCK
H. TONE
I. INFO (Information)
J. AS (Automatic Store)
K. BACK
L. FAV (Favorite)
M. O(Power/Volume)
N. gREV (Reverse)
O. BAND (AM, FM, XM)
P. DEL (Delete)
Q. k(Play/Pause)

Black plate (7,1)
Chevrolet Cruze Navigation System - 2011
Infotainment System 7
R. DVD/HDD/AUX (Source)
S. RPT NAV (Repeat Navigation)
T. 5/>(Phone/Mute)
U. lFWD (Forward)
V. X(Eject)
W. MENU or MENU/SEL
NAV (Navigation) Menu
The Navigation menu screen
accesses the navigation system
settings.
1. Press the NAV button to view
the navigation map screen. The
map and current vehicle location
displays.
2. Press the NAV button again to
change between a map/audio
split view or a full map view.

Black plate (8,1)
Chevrolet Cruze Navigation System - 2011
8 Infotainment System
Config Setup Menu
The Config setup menu is used for
changing the options for the audio,
navigation, display, vehicle
configuration, phone, and time.
Press the CONFIG button to display
the Config Menu, then turn the
MENU or MENU/SEL knob to scroll
through the features. Once the
desired feature displays, press the
MENU or MENU/SEL knob to
display more options within that
feature.
Languages
The vehicle supports English,
French (Canadian), and Spanish.
The default language is English.
To change the display language,
see “Vehicle Personalization”in the
Index of the vehicle's owner manual.
English and Metric Unit
Conversion
To change the display units between
English and metric units, see “Driver
Information Center (DIC)”in the
Index of the vehicle's owner manual.
Deleting Personal Information
The navigation system can store
destinations and personal
information such as names and
addresses.
At times, such as when selling or
disposing of your vehicle, you may
want to delete this information:
.Previous Destinations
.Address Book, Fav Route,
Preset Destinations, and HDD
music files
Storing Radio Station Presets
Up to 36 preset stations can be
stored. AM, FM, and XM™(if
equipped) can be mixed. To store
presets:
1. Press Oto turn the system on.
2. If viewing a map screen, press
the BAND or FAV buttons.
3. Select the band.
4. Press the Seek arrows on the
faceplate or turn and press the
MENU or MENU/SEL knob to
select a station.

Black plate (9,1)
Chevrolet Cruze Navigation System - 2011
Infotainment System 9
5. Press and hold one of the preset
buttons for more than one and a
half seconds.
6. Repeat the steps for each
preset.
To change the number of preset
pages, see AM-FM Radio on
page 12 for more information.
Entering an Address and Point
of Interest, and Storing Preset
Destinations
The vehicle must be in P (Park) to
perform these operations.
Entering an Address
If having trouble finding a city or a
street name:
.Use the MENU or MENU/SEL
knob by turning it to scroll, then
press it as needed to enter the
street name first, instead of the
city name, or vice versa.
.Use the MENU or MENU/SEL
knob by turning it to scroll, then
press it as needed to enter more
characters or reduce the number
of characters to expand or
reduce the available options.
To set a destination by entering a
street name:
1. Press the DEST button.
2. If necessary, use the MENU or
MENU/SEL knob to enter the
state/province name. The last
state/province name is
automatically recalled.
3. Use the MENU or MENU/SEL
knob to select the street name
field. Enter the street name. Do
not enter directional information
or street type. Use the space
screen button between street
and city names. Select the
backspace qscreen button to
delete an incorrect character.
A list displays if four or fewer
names are available. If there are
more than four, there is a match
counter with a number of
available streets. Press the List
button using preset 6 to view the
list and select the street.
4. Use the MENU or MENU/SEL
knob to select the city from the
list or enter the city name.
5. Use the MENU or MENU/SEL
knob to enter the house number.
This field is automatically
selected.
6. Press the OK preset 6 button on
the faceplate. The address
information screen displays the
address entered.
7. Press preset 6 if correct. The
route will calculate.

Black plate (10,1)
Chevrolet Cruze Navigation System - 2011
10 Infotainment System
8. Select the route preference
preset for Fastest, Shortest,
or Easiest. The chosen route
preference highlights. See
Destination on page 50 for more
information.
9. Press preset 6 to Start
Guidance. The route is
calculated.
See “Address Entry”under
Destination on page 50 for more
information.
Entering a Point of Interest (POI)
To set a destination by entering a
Point of Interest (POI):
1. Press Oto turn the system on.
2. A Caution could appear. Press
the OK preset 6 button on the
faceplate to proceed.
3. Press the DEST button.
4. Use the MENU or MENU/SEL
knob to select the Point of
Interest.
5. Use the MENU or MENU/SEL
knob to enter the specific title of
the POI in the POI name space.
If four or less names are
available, a list displays. If more
than four are available, there is a
match counter with a number in
it, representing the number of
available POI names. Press the
List button using preset 6 to view
the list. Press the MENU or
MENU/SEL knob to select
the POI.
6. Press the Go preset 6 button on
the faceplate if correct. The
route will calculate.
7. Select the route preference
preset for Fastest, Shortest,
or Easiest. The system
highlights the route.
8. Press the preset 6 button to Start
Guidance. The route is now
ready to be started.
See “Point of Interest (POI)”under
Destination on page 50 for more
information.
Storing Preset Destinations
1. Press Oto turn the system on.
2. A Caution could appear. Select
the OK preset 6 button to
proceed.
3. Press the NAV or DEST buttons.
4. Use the MENU or MENU/SEL
knob to enter a destination. See
Destination on page 50 for
information on how to enter a
destination.
5. Press the Save preset button to
add the current final destination
to the address book.
The address book screen
appears.

Black plate (11,1)
Chevrolet Cruze Navigation System - 2011
Infotainment System 11
6. Press the Name preset button.
An alpha-keyboard displays.
Enter the name.
7. Press and hold one of the preset
buttons until the text in the
button changes.
The address book entry name
appears in that preset
destination and is now available
to select from the Select
Destination screen. See “Using
the Stored Preset Destinations”
next in this section to select it as
a destination.
See Destination on page 50 for
more information on how to add
preset destinations.
Using the Stored Preset
Destinations
These destinations are available for
selection while driving.
1. Press Oto turn the system on.
2. A Caution could appear. Press
the OK preset 6 button on the
faceplate to proceed.
3. Press the DEST button.
4. Select one of the available
preset destination buttons. The
system calculates the route.
5. Select the route preference
preset for Fastest, Shortest,
or Easiest. The system
highlights the route.
6. Press the preset 6 button to Start
Guidance. The route is now
ready to be started.
See “Preset Destination”under
Destination on page 50 for more
information.
Canceling Guidance
Guidance is canceled once you
arrive at the final destination. To
cancel guidance prior to arrival at
the final destination:
1. Press the DEST button.
2. Use the MENU or MENU/SEL to
select the Cancel Guidance from
the list.
3. Press the Yes preset button to
confirm cancellation.
Voice Guidance
To adjust the volume of voice
guidance prompts:
1. Press the CONFIG button to
enter the menu options. Turn the
MENU or MENU/SEL knob until
Nav displays. Press the MENU
or MENU/SEL knob to select
Nav and to display further
options within that feature.
2. Use the MENU or MENU/SEL
knob to select Voice Prompt
from the list.

Black plate (12,1)
Chevrolet Cruze Navigation System - 2011
12 Infotainment System
3. Use the MENU or MENU/SEL
knob to select Voice Volume
from the list.
4. Adjust the volume of the voice
prompts by turning the MENU
MENU/SEL knob.
Cleaning the Display
Notice: Using abrasive cleaners
when cleaning glass surfaces,
could scratch the glass. When
cleaning the glass, use only a
soft cloth and do not spray
cleaner directly on the system.
Do not apply spray cleaner directly
to the system, the cleaner could
affect the mechanical parts.
Do not wipe the panel with a hard
cloth or use a volatile liquid such as
paint thinner, it could scratch the
surface or erase the characters on
the buttons.
Using the System
The navigation system in the vehicle
is not a touch screen system. It is
controlled by using the MENU or
MENU/SEL knob, eight-way selector
arrows, preset buttons, and other
buttons on the faceplate.
The MENU or MENU/SEL knob can
be turned to move through the
menus and then pressed to
complete any of the highlighted
screen functions.
The eight-way selector arrows can
be pressed from side to side, up,
or down to navigate through many
of the menus.
The preset buttons can be pressed
to select the appropriate screen
button function as shown on the
display.
Radio
AM-FM Radio
Playing the Radio
Audio Source Menu
O(Power/Volume):
.Press to turn the radio on or off.
.Turn the knob to increase or
decrease the volume. The
volume is adjusted for the
current audio source, active
navigation voice guidance,
or voice prompts.
The steering wheel controls can
also be used to adjust the volume.
See “Steering Wheel Audio
Controls”in the vehicle's owner
manual for more information.
Also, see “Radio Settings”and
“Automatic Volume Control”in this
section.

Black plate (13,1)
Chevrolet Cruze Navigation System - 2011
Infotainment System 13
MENU or MENU/SEL: Turn to
change the radio station. See
“Finding a Station”following for
more information.
BAND: Press to select the AM, FM,
or XM (if equipped) band.
The audio sources can also be
changed by using the steering
wheel controls. See “Steering Wheel
Audio Controls”in the vehicle's
owner manual for more information.
DVD/HDD/AUX: Change to DISC,
HDD, USB, or AUX by pressing this
button until the desired source is
selected.
Press the NAV button to display the
current audio source screen. The
display shows a split screen with
the audio source screen on the left
side and the map or guidance
screen on the right side. Press NAV
again to exit the split view screen.
Sound Menu
To access the sound menu, press
the TONE button.
Use the sound menu to adjust the
following features:
.Setting the Tone
.Adjusting the Speakers
Setting the Tone
Scroll through the settings by
repeatedly pressing the TONE
button.
To adjust the bass, treble and
midrange:
.Treble: Adjust the treble by
turning the MENU or MENU/SEL
knob to change the level.
.Mid (Midrange): Adjust the
midrange by turning the MENU
or MENU/SEL knob to change
the level.
.Bass: Adjust the bass by turning
the MENU or MENU/SEL knob
to change the level.

Black plate (14,1)
Chevrolet Cruze Navigation System - 2011
14 Infotainment System
Adjusting the Speakers
Scroll through the settings by
turning the MENU or MENU/SEL
knob. Press this knob to select BAL.
To adjust the speaker balance:
.Turn the MENU or MENU/SEL
knob for more sound from the
left or right speakers.
To adjust the speaker fade:
.Turn the MENU or MENU/SEL
knob for more sound from the
front or rear speakers.
EQ Settings
EQ (Equalization): The EQ
settings are selected through the
sound menu. EQ provides a choice
of Manual, Talk, Country, Pop, Rock,
or Classical settings. Press the
appropriate preset number located
on the faceplate to change the
setting.
Radio Settings
To access the Radio settings menu:
.Press the CONFIG button.
.Turn the MENU or MENU/SEL
knob until Radio displays. Press
the MENU or MENU/SEL knob
to display other options within
that feature.

Black plate (15,1)
Chevrolet Cruze Navigation System - 2011
Infotainment System 15
Audio system settings or features
can be customized for:
.Automatic Volume Control
Use the MENU or MENU/SEL
knob to select OFF, Low,
Medium, or High sensitivity to
automatically adjust the volume
to minimize the effects of
unwanted background noise that
can result from changing road
surfaces, driving speeds or open
windows. This feature works
best at lower volume settings
where background noise is
typically louder than the sound
system volume.
.Number of Favorite Pages
Change the number of
mixed-band preset pages when
using FAV. Turn the MENU or
MENU/SEL knob to scroll 1
through 6. Press the MENU or
MENU/SEL to select the number
of preset lists.
.HDD FAV Pages (number of
favorite categories for
HDD mode)
Use the MENU or MENU/SEL
knob to select the categories
such as Playlist, Artist, Album,
and Genre to be used as a
favorite category during
HDD mode.
.DivX
®
Registration Code
Use the MENU or MENU/SEL
knob to Display the DivX
registration code used for DivX
media playback.
Finding a Station
Select a band such as AM, FM,
or XM (if equipped).
Turn the MENU or MENU/SEL knob
to find a radio station. To select a
preset station, press the
corresponding preset button.
See “Mixed-Band Presets”following
for more information.
Seeking a Station
Press lor gto search for a
station.
Local Station List Search
To find a list of local stations in the
current AM or FM band, turn the
MENU or MENU/SEL knob. The
radio performs a search for
available stations.

Black plate (16,1)
Chevrolet Cruze Navigation System - 2011
16 Infotainment System
Mixed-Band Presets
Up to 36 preset stations can be
stored. Each page can store
six preset stations. The presets
within a page can be from different
radio bands.
To scroll through the pages, press
the FAV (favorites) button. The
current page number displays above
the preset buttons. The stored
stations for each list displays at the
bottom of the screen. The number of
preset FAV lists can be changed.
To store a radio station to a
mixed-band preset list:
1. Press the BAND button until the
desired band is selected.
2. Turn the MENU or MENU/SEL
knob to the station.
3. Press the FAV button to scroll
the list.
4. Press and hold one of the
preset buttons for more than
two seconds. The station
frequency appears on the preset
button at the bottom of the
display.
5. Repeat the steps for each preset
in each page.
To recall a preset station from a
FAV page:
1. Press the FAV button to scroll to
the page.
2. Press the preset button. The
stored preset station is recalled.
Automatic Store
The strongest stations in a radio
band can be searched and
automatically stored through the
Automatic Store feature. Press and
hold the AS button until an
autostore message displays. The
12 stations with the strongest signal
strength in the current radio band
will be stored.
Timeshift
The timeshift feature automatically
begins recording the audio when
listening to the radio.
The recording allows playback of
content that was missed.
Timeshift stores up to 20 minutes of
content. After 20 minutes, it
removes the oldest content and
continues recording new content.
While listening to the radio, press
the kbutton to stop hearing the
information through the speaker.
During this paused time, timeshift
keeps recording. A status bar
displays the length of the recording.
To resume listening to the broadcast
at the point left off, press the
kbutton again.
Timeshift stops recording and
erases the buffer when the vehicle
is turned off or the station or source
is changed.

Black plate (17,1)
Chevrolet Cruze Navigation System - 2011
Infotainment System 17
Before turning the vehicle off, press
the kbutton to keep timeshift
recording for 20 minutes. If the
vehicle is still off after 20 minutes,
the system stops recording and all
information is lost. If a low battery
condition occurs, timeshift stops
recording and all information is
erased.
Radio Data System (RDS)
The audio system has a Radio Data
System (RDS). RDS features are
available for use only on FM
stations that broadcast RDS
information. With RDS, the
radio can:
.Seek to stations broadcasting
the selected type of
programming.
.Receive announcements
concerning local and national
emergencies.
.Display messages from radio
stations.
This system relies on receiving
specific information from these
stations and only works when the
information is available. In rare
cases, a radio station could
broadcast incorrect information that
causes the radio features to work
improperly. If this happens, contact
the radio station.
The RDS system is always on.
When information is broadcast from
the current FM station, the station
name or call letters display on the
audio screen. RDS can provide a
program type (PTY) for current
programming and the name of the
program being broadcasted.
Satellite Radio
XM™Satellite Radio Service
XM is a satellite radio service that is
based in the 48 contiguous United
States and 10 Canadian provinces.
XM Satellite Radio has a wide
variety of programming and
commercial-free music,
coast-to-coast, and in digital-quality
sound. During the trial or when you
subscribe, you will get unlimited
access to XM Radio Online for
when you are not in the vehicle.
A service fee is required to receive
the XM service. For more
information, contact XM at
www.xmradio.com or call
1-800-929-2100 in the U.S. and
www.xmradio.ca or call
1-877-438-9677 in Canada.
When XM is active, the channel
name and number, song title, and
artist displays on the screen.
XM Radio Messages
See “XM Radio Messages”in the
vehicle's owner manual for a list of
possible XM messages.

Black plate (18,1)
Chevrolet Cruze Navigation System - 2011
18 Infotainment System
Audio Players
CD/DVD Player
The player can be used for CD,
MP3, and DVD audio, and as a
DVD video player.
With the ignition on, insert a CD/
DVD into the slot, label side up. The
player pulls it in and begins playing.
While playing, the navigation
system is available.
The vehicle must be in P (Park) for
video to display.
The DVD player is only compatible
with DVDs of the appropriate region
code that is printed on the jacket of
most DVDs.
The system is capable of playing:
.Most audio CDs
.CD-R
.CD-RW
.MP3 or unprotected WMA
formats
.DVD-Video
.DVD-Audio
.DVD-R/RW
.DVD+R/RW
When playing any compatible
recordable disc, the sound quality
can be reduced due to disc quality,
the method of recording, the quality
of the music or video that has been
recorded, or the way the disc has
been handled.
There can be increased skipping,
difficulty in recording tracks, and
difficulty in finding tracks/chapters,
and/or difficulty in loading and
ejecting. If these problems occur,
check the disc for damage or try a
known good disc.
To avoid damage to the CD/DVD
player:
.Do not use scratched or
damaged discs
.Do not apply labels to discs. The
labels could get caught in the
player.
.Insert only one disc at a time.
.Keep the loading slot free of
foreign materials, liquids and
debris.
If a description label is needed, try
labeling the top of the disc using a
marking pen.

Black plate (19,1)
Chevrolet Cruze Navigation System - 2011
Infotainment System 19
Loading and Ejecting Discs
To load a disc:
1. Turn the ignition on.
2. Insert a disc into the slot. The
player pulls it in the rest of the
way. If the disc is damaged or
improperly loaded, there is an
error and the disc ejects.
The disc automatically plays once
loaded.
Press Xto eject a disc from the
CD/DVD player.
Playing a CD/DVD
A disc must be loaded to select the
source.
When a disc is loaded, the disc icon
displays.
There are two ways to play a
CD/DVD:
.Insert the disc and playback
starts automatically.
.Press the DVD/HDD/AUX button
repeatedly to select the disc
source.
Playing an Audio CD
A track number displays at the
beginning of each track. Song,
Artist, and Album information
displays when available.
Use the following controls to play
the disc:
k(Play/Pause): Press to start,
pause, or resume play.
l(Seek Next/FWD):
.Seeks to the next track.
.Press and hold to fast forward
through a track. Release to
return to playing speed. Elapsed
time displays.
g(Seek Previous/REV):
.Seeks to the beginning of the
current or previous track.
‐If the track has been playing
for less than five seconds, it
seeks the previous track.
‐If longer than five seconds, the
current track starts from the
beginning.
.Press and hold to fast reverse
through a track. Release the
button to return to playing
speed. Elapsed time displays.

Black plate (20,1)
Chevrolet Cruze Navigation System - 2011
20 Infotainment System
MENU or MENU/SEL: Turn this
knob to display the track list. Press
to select the track from the list. The
system plays the selected track and
returns to the CD screen.
CD Menu
Press the MENU or MENU/SEL
knob to display the CD Menu.
Shuffle: Select to play the tracks
randomly rather than in sequence.
Select again to stop shuffle. A check
mark indicates shuffle is on.
Track List: Select to display the list
of tracks on the disc. Select the
track from the list. The selected
track plays and the CD screen
displays.
Playing an Audio and
Video DVD
To view the DVD video, the vehicle
must be in P (Park) for an automatic
transmission or the parking brake
must be engaged for a manual
transmission.
After the DVD is loaded, the menu
options display on the DVD screen.
The menu options time out and a
full screen appears after about
10 seconds. Press the FAV, DVD/
HDD/AUX, or BACK button to view
the menu screen again.
Use the preset buttons to operate
the DVD options.
There are two pages of DVD
options. Select the arrow button by
pressing the appropriate preset
button to access the other page.
Only the highlighted functions are
available for use. Some menu
options are only available when the
disc is not playing.
DVD Options
Full Screen:
1. The menu options time out and
a full screen appears after about
10 seconds.
2. Press the FAV, DVD/HDD/AUX,
or BACK button to re-display the
source screen options over the
video image.