Chevrolet SILVERADO 2500 HD 2022 Assembly instructions

1
Certain restrictions, precautions, and safety procedures apply to your vehicle.
Please read your Owner’s Manual for complete instructions.
2022
SILVERADO 2500 HD/3500 HD
chevrolet.com
Review this Quick Reference Guide for an overview of some important features in your Chevrolet
Silverado. Some equipment described in this guide may not be included in your vehicle. Contact your
dealer for details on a specific vehicle. More information can be found in your Owner’s Manual and at
my.chevrolet.com. For easy reference, keep this guide with your Owner’s Manual in your glove box.
GETTING TO KNOW YOUR

2
INSTRUMENT PANEL
Cruise Control/ Forward
Collision AlertF/Heated
Steering WheelF
Buttons
Electric
Parking
Brake
Switch
Power
MirrorF/
Window
Buttons
Driver
Information
Center
ControlsF/
Voice
Recognition
Buttons
Audio Volume
Control
(on back
of steering
wheel)
Steering
Wheel
Adjustment
Lever (on
steering
column)
Audio Next/
Previous
Favorite Station
Controls
(on back of
steering wheel)
Exterior/
Instrument Panel/
Cargo Lamp
Controls
4WD
ControlsF/
Driver Mode
Control
Turn Signal/
Windshield
Wipers Lever
Range +/-
Gear Selection
Buttons
(on shift lever)
Driver
Information
Center
HUD ControlsF
(behind
steering
wheel)
Low Fuel
Traction Control Off
Brake System
Cruise Control
StabiliTrak Active
StabiliTrak Off
Forward Collision Alert
Security
PARK Electric Parking Brake
Electric Parking Brake Service
Lights On Reminder
Airbag Readiness
Engine Oil Pressure
Check Engine
Vehicle Ahead
SYMBOLS
Diesel model shown

3
Read your Owner’s Manual to
learn about the information being
relayed by the lights, gauges
and indicators on the instrument
cluster.
See Introduction in your
Owner’s Manual.
Driver’s Heated/
Ventilated Seat
ButtonsF
Infotainment
System (8-inch*
screen shownF)
Passenger’s
Heated/Ventilated
Seat ButtonsF
Infotainment
System
Controls Climate
ControlsF
USB Ports/
Accessory
Power
Outlet/120-Volt
Power OutletF
Engine
Start/
Stop
ButtonF
Integrated
Trailer
Brake
ControlF
Wireless
Phone
Charging
PadF
Diesel Exhaust BrakeF/
Lane Departure
WarningF/Park AssistF/
Power TailgateF/Hazard
Warning Flashers
Buttons
F
Optional equipment *Screen measured diagonally
Traction Control-
StabiliTrak Off/
Power OutletF/
Hill Descent ControlF/
Power WindowsF
Buttons
Antilock Brake System
Low Tire Pressure
Door Ajar
Lane Departure
Warning
Charging System
Driver Seat Belt Reminder
2
Passenger Seat Belt
Reminder
AU
TO
4WD Mode

4
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle.
Press and hold to activate the alarm.
Press again to cancel the alarm.
Power ReleaseF/Power TailgateF
Press twice to lower the tailgate.
To raise the power tailgate, press once
and then press again and hold until the
tailgate is fully closed.
Remote Vehicle StartF
Press and release the Lock button
and then press and hold the button
until the turn signal lamps flash to start
the engine from outside the vehicle. After
entering the vehicle, turn on the ignition.
To cancel a remote start, press and hold the
button until the parking lamps turn off.
See Keys, Doors and Windows in your Owner’s Manual.
F Optional equipment
KEYLESS ACCESS SYSTEMF
REMOTE KEYLESS ENTRY TRANSMITTER (KEY FOB)F
The Keyless Access System enables operation of the doors and tailgate without removing
the Remote Keyless Entry transmitter (key fob) from your pocket or purse. The key fob
must be within 3 feet of the tailgate or the door being unlocked/locked.
KEYLESS UNLOCKING
With the key fob within range:
Press the button on the driver’s door handle
to unlock the driver’s door; press again with-
in 5 seconds to unlock all doors and tailgate.
Press the button on the front passenger’s
door handle to unlock all doors and tailgate.
Press the button on the tailgate to lower the standard tailgate.
KEYLESS LOCKING
With the ignition off, the key fob removed from the vehicle, and all doors closed:
Press the button on any front door handle to lock all doors and tailgate immediately.
If Passive Locking is turned on in the Settings menu, all doors will lock automatically
after a short delay.
Note: To change the door lock and unlock settings, go to Settings > Vehicle > Remote Lock, Unlock, Start
on the infotainment screen.
See Keys, Doors and Windows in your Owner’s Manual.
Lock
Press to lock all doors
and tailgate.
Unlock
Press to unlock the
driver’s door or all doors
and tailgate.
Remote WindowsF
Press and hold the
Unlock button until the
windows are fully open. To enable, go to
Settings > Vehicle > Remote Lock, Unlock,
Start on the infotainment screen.
Remote MirrorsF
Press and hold the Lock/Unlock button
for 1 second to fold/unfold the power
mirrors. To enable, go to Settings >
Vehicle > Comfort and Convenience on
theinfotainment screen.

5
STARTING THE VEHICLE
With the vehicle in Park or Neutral, rotate the key clockwise to
the Start position.
TURNING OFF THE VEHICLE
Shift to Park.
Push the key all the way in (1) and then rotate the key counter-
clockwise to the Lock/Off position (2).
See Driving and Operating in your Owner’s Manual.
The Remote Keyless Entry transmitter (key fob) must be in the vehicle to turn on the
ignition.
STARTING THE ENGINE/ON
With the transmission in Park or Neutral,
press and hold the brake pedal and then
press the ENGINE START/STOP button
tostart the engine. The green button
indicator will illuminate.
Note: If the key fob battery is weak, place the
key fob in the pocket in the center storage
compartment (under the bench seat) or center
console cupholders (bucket seats) to enable the
engine to start. Replace the key fob battery as soon
as possible.
STOPPING THE ENGINE/OFF
Shift to Park and then press the ENGINE START/STOP button to turn off the engine.
The green button indicator will turn off.
Power will be available for 10 minutes to operate the audio system until the driver’s door
is opened and to operate the windows and sunroofFuntil any door is opened.
ACCESSORY MODE
With the engine off and the brake pedal not depressed, press the ENGINE START/STOP
button to place the ignition in accessory mode to operate the radio, windows and
other accessories with the engine off. The amber button indicator will illuminate.
Press and hold the ENGINE START/STOP button for several seconds to place the
ignition in Service Mode to operate additional systems.
See Driving and Operating in your Owner’s Manual.
F Optional equipment
KEYLESS (PUSH-BUTTON) STARTF
KEYED IGNITION SYSTEM (I f E quIppEd )
2
1

6F
Optional equipment
DRIVER INFORMATION CENTER
MULTICOLOR HEAD-UP DISPLAYF
The Driver Information Center (DIC) on the instrument cluster displays a variety of
vehicle messages and system information.
BASE DIC CONTROL
Use the trip odometer reset stem on the
instrument cluster to access the DIC menu.
Turn the stem to scroll through the menu.
Press and hold the stem to reset an item.
MIDLEVEL AND UPLEVEL DIC CONTROLS
F
Use the controls on the right side of the
steering wheel to view the various menus.
Press the or button to move
between the display zones.
Rotate the thumbwheel up or down to
move through the menus.
Press the thumbwheel to open a menu,
or to select or reset an item.
SELECT INFO PAGES
F
1. Use the controls to open the Options menu.
2. Scroll to Info Page Options. Press the thumbwheel to enter the menu.
3. Scroll through the list of items.
4. Press the thumbwheel to select or deselect an item to display in the Info menu.
See Instruments and Controls in your Owner’s Manual.
The Head-Up Display (HUD) projects some operating information
on the windshield. Temporary information, such as audio changes
and navigation maneuvers, also may be displayed. The HUD con-
trols are on the left side of the instrument panel.
HUD
HUD Position
Lift up or press down to adjust the position of
the image. It cannot be adjusted side to side.
INFO
Press to select from four displays:
•Speed View – Speedometer only
•Active Safety View – Speedometer and driver assistance information
•Navigation View – Speedometer and turn-by-turn navigation information
•Off-Road View – Speedometer and off-road information
Brightness
Lift up to brighten or press down to dim the display. Hold down to turn off the display.
See Instruments and Controls in your Owner’s Manual.
Midlevel and uplevel DIC Controls
F
shown

7
F Optional equipment
CLIMATE CONTROLS/VEHICLE CONTROLSF
AUTO
Driver’s Temp.
Control/
Automatic
OperationF
SYNC
Passenger’s Temp.
Control/Synchronize
passenger’s setting to
driver’s settingF
AC/
Air Conditioning/
Recirculation
Mode
Fan
Speed/
On/Off
MAX
/
REAR
Defrost Mode/
Rear Window-
Heated Outside
Mirror DefogF
Air Delivery Modes:
Defog
Vent
Floor
Lane
Departure
Warning
On/OffF
Diesel
Exhaust
Brake On/
OffF
Hill Descent
Control On/
OffF
Park Assist
On/OffF
Press to
lower/Press
and hold to
raise the
power
tailgateF
Cargo Box
Power Outlet
On/OffF
(Ignition
must be On)
Hazard
Warning
Flashers
On/Off
Traction
Control/
StabiliTrak
On/Off
Dual automatic climate controls
F
shown
See Introduction in your Owner’s Manual.
TRUCK TIRE PRESSURE MONITORING SYSTEM
The Low Tire Pressure warning light on the instrument cluster illuminates when one
or more of the vehicle’s tires is significantly underinflated. Fill the tires to the proper tire
pressures listed on the Tire and Loading Information label, located below the driver’s
door latch. Current tire pressures can be viewed on the Driver Information Center.
With the ignition On or in Accessory mode, the Tire Fill Alert provides visual and audible
alerts to help with inflating a tire (does not apply to spare tire). When the recommended
pressure is reached, the horn sounds and the turn signals change from flashing to solid.
Note: Refer to your Owner’s Manual for accessory trailer tire pressure monitoring system information.
See Vehicle Care in your Owner’s Manual.

8
INFOTAINMENT SYSTEM
The infotainment system uses a Bluetooth or USB connection to link to a compatible
device, such as a smartphone or portable audio player/iPod®, and offers hands-free
voice control. For assistance, call 1-855-4-SUPPORT (1-855-478-7767) or visit
my.chevrolet.com/how-to-support.
MANAGING HOME PAGE ICONS
1. Press the Home button.
2. To enter edit mode, touch and hold the Home page icon to move.
3. Continue holding the icon and drag it to the desired position, and then release.
See Infotainment System in your Owner’s Manual.
Turn to tune
stations and
highlight menu
items/Press to
open and select
items
Home
page
Power/
Volume/Mute
SEEK
Previous/Next
radio station
or track
Read your Owner’s Manual for important information about using the infotainment system while driving.
Additional Pages:
Swipe to display overview
page or additional pages of
apps (if available)
Applications
F
:
Touch a screen
icon to access
an app
Applications Tray:
Shortcuts to
commonly
used apps
BACK
Move back
one level in
the menus
Uplevel infotainment systemFshown
F Optional equipment

9
F Optional equipment
4G LTE WI-FI® HOTSPOTF
With the vehicle’s available 4G LTE Wi-Fi Hotspot, up to 7 devices (smartphones, tablets
and laptops) can be connected to high-speed internet.
To retrieve the name and password for the hotspot, select the Wi-Fi Hotspot icon.
See Infotainment System in your Owner’s Manual.
INFOTAINMENT SYSTEM
STORING FAVORITES
Radio stations from all bands (AM, FM or
SiriusXMF) can be stored in any order. Audio
sources are on the left side of the page.
1. Display the desired radio station.
2. Display the desired audio favorites page.
3. Touch and hold one of the favorite buttons
until a beep is heard.
SIRIUSXM WITH 360LF
The personalized content of SiriusXM with 360L offers over 200 channels, including
ad-free music, sports, comedy, talk and news, along with access to On Demand shows,
performances and interviews. Certain features require a SiriusXM subscription and a
Connected Access plan. See siriusxm.com and onstar.com for details.
IN-VEHICLE APPS
In-vehicle apps offering entertainment, news, weather, travel information and more,
including Amazon Alexa Built-In, are available on the infotainment screen or can be
downloaded through the Apps icon. Downloading and using the apps requires internet
connectivity, and may require a data plan, accessed through the vehicle’s available 4G LTE
Wi-Fi Hotspot, if active, or a mobile hotspot. Go to onstar.com for data plan information.
APPLE CARPLAY® AND ANDROID AUTO™F
Apple CarPlay or Android Auto capability is available through a compatible phone using
the Apple CarPlay or Android Auto icon on the Home page.
1. Download the Android Auto app to your compatible phone from the Google Play Store.
No app is required for Apple CarPlay.
2. There are two ways to set up device projection:
•Wireless Connection – Connect your phone by pairing it to the in-vehicle Bluetooth
system. Turn on wireless Apple CarPlay or Android Auto in your phone’s settings.
•Wired Connection – Connect your phone to a USB data port using the USB cable
provided with your phone. Aftermarket USB cables may not work.
3. Follow the instructions on the infotainment system and the phone.
4. The Apple CarPlay or Android Auto icon will illuminate when connected. Touch the icon
to have your apps displayed.
To exit Apple CarPlay or Android Auto, press the Home button. To return to Apple
CarPlay or Android Auto, press and hold the Home button.
See Infotainment System in your Owner’s Manual.

10
BLUETOOTH® SYSTEMF
Read your Owner’s Manual for important information about using the Bluetooth system while driving.
Before using a Bluetooth-enabled device in the vehicle, it must be paired with the in-
vehicle Bluetooth system. The vehicle must be stopped to pair a device. Not all devices
will support all functions.
PAIR A PHONE
1. To use voice recognition, press the
Press to Talk button; after the beep,
say “Pair phone.” To use the infotain-
ment screen, select the Phone icon >
Phones or Connect Phone > Add Phone.
2. Start the pairing process on your phone.
From the phone’s Bluetooth settings,
select the name shown on the infotainment screen.
3. Follow the pairing instructions.
4. When pairing is complete, the phone screen is displayed.
SECONDARY PHONE
A secondary phone can be paired to the Bluetooth system. The system connects to the
phone that is set to First to Connect. The secondary phone can only receive calls.
To set the first and secondary phones, select the Phone icon > Phones >
Information.
STREAMING AUDIO
With a device connected via Bluetooth, touch the Audio icon, and then touch More, if
necessary, to select Bluetooth as the audio source.
See Infotainment System in your Owner’s Manual.
F Optional equipment
WIRELESS PHONE CHARGINGF
The Wireless Phone Charging system is
located at the front of the center con-
sole. To check device compatibility, visit
my.chevrolet.com/how-to-support. See
your phone retailer for details on required
phone accessories.
1. The vehicle must be On, or Retained
Accessory Power must be active.
2. Remove all objects from the charging pad.
3. Place the phone, screen up, on the on the pad.
4. The charging symbol will appear on the infotainment screen when charging. If not
charging, remove the phone for 3 seconds, and rotate it 180 degrees.
See Instruments and Controls in your Owner’s Manual.

11
F Optional equipment
VEHICLE CUSTOMIZATIONF
Some features can be turned on/off or
customized using the Settings menus on
the infotainment screen. The Settings
menus include System, Apps, and Vehicle.
1. Select Settings on the Home page.
2. Select the desired menu tab.
3. Select the desired feature and setting.
4. Press BACK to exit each menu.
See Instruments and Controls in your Owner’s Manual.
UNIVERSAL REMOTE SYSTEM
The Universal Remote System on the overhead console enables your vehicle to control
3 different devices, ranging from garage doors and gates to home lighting. Go to
homelink.com for detailed videos and instructions on how to program the Universal
Remote System. For additional assistance, call 1-800-355-3515.
See Instruments and Controls in your Owner’s Manual.
SET MEMORY POSITIONS
1. With the vehicle in Park, adjust the driver’s seat and power outside mirrorsF.
2. Press and release the SET button on the driver’s door. A beep will sound.
3. Immediately press and hold button 1or 2until two beeps sound. Use the button that
matches the Driver Information Center welcome message indicating driver 1 or 2
(keyfob 1 or 2).
To store a seat position for more clearance when exiting the vehicle, repeat these steps
using the Exit button instead of button 1or 2.
RECALL POSITIONS
Press and hold button 1or 2or Exit
until the set position is reached.
To enable the memory positions to be
recalled automatically when the ignition
is turned on/off (for exit recall, the driv-
er’s door must be opened), go to Settings
> Vehicle > Seating Position > Seat Entry
Memory and Seat Exit Memory.
See Seats and Restraints in your Owner’s Manual.
POWER FRONT SEATSF

12 F
Optional equipment
HILL DESCENT CONTROLF
Hill Descent Control sets and maintains vehicle speed from 1–14 mph while descending a
steep incline in a forward or reverse gear.
1. Press the Hill Descent Control button on the center of the instrument panel.
Vehicle speed must be below 31 mph to enable the system. The symbol will illumi-
nate on the instrument cluster.
2. Increase or decrease speed by applying the accelerator or brake pedal or use the
Cruise Control +/– buttons on the steering wheel. The adjusted speed becomes the
new set speed. The symbol flashes when the system is actively applying the
brakes to maintain vehicle speed.
See Driving and Operating in your Owner’s Manual.
LIGHTING
LAMP CONTROLS
Use the knob to activate the exterior lamps.
Off/On
AUTO
Automatically activates the exterior lamps
depending on outside lighting conditions.
Parking Lamps
Headlamps
Fog LampsF
Press to turn the fog lamps on/off.
Instrument Panel Brightness
Press and hold the +/– buttons to adjust
the instrument panel lighting.
Task LightingF
Press repeatedly to cycle through the
forward-facing outside mirror lamp options:
both lamps on, left lamp on, right lamp on,
both lamps off.
Cargo LampF
With the vehicle in Park, Reverse, or
Neutral, press to cycle through the cargo
bed/hitch lamps and/or rear-facing mirror
lamps.FThe button indicator illuminates
when the cargo bed lamps are on.
INTELLIBEAM SYSTEM
F
The IntelliBeam system automatically
turns the high-beam headlamps on/off
according to surrounding traffic at night
when the lamp control is in the AUTO or
position and the system is activated,
indicated by a green on the instru-
ment cluster. A blue appears when the
high-beam headlamps are on.
To turn the IntelliBeam system on or
off, press the button on the end of
the turn signal lever with the lamp
control in the AUTO or position.
Note: The fog lamps must be off to activate the
IntelliBeam system. IntelliBeam activates the
high-beam headlamps only when driving over
25 mph.
See Lighting in your Owner’s Manual.

13
DRIVER MODE CONTROL
The Driver Mode Control settings automati-
cally adjust various vehicle control systems
based on driving preferences, weather and
road conditions. The modes are displayed on
the Driver Information Center.
Rotate the control knob (A) to the right to
select a mode. Modes may include:
Normal – Use for normal driving.
Snow/Ice (2WD only) – Use for enhanced traction during slippery conditions.
Off-Road (4WD only) – Use for enhanced control on unpaved roads or trails at
moderate speeds.
Tow/Haul – Rotate the knob to the left; use to reduce shift cycling when towing or
hauling heavy loads in stop-and-go traffic, rolling hills, or busy parking lots.
FOUR-WHEEL DRIVE
Use the four-wheel drive buttons (B) on the
left side of the instrument panel to shift
into and out of four-wheel drive. The Driver
Information Center displays the current
status of the transfer case.
AUTO Automatic Four-Wheel Drive High
– Use when traction conditions vary for
automatic shifting between 2WD and 4WD.
Shift into this mode at any speed except
when shifting from
4
4
2
.
4
4
2
Two-Wheel Drive High – Use for most streets and highways. Shift into this mode at
any speed except when shifting from
4
4
2
.
4
4
2
Four-Wheel Drive High – Use when extra traction is needed or in most off-road
driving. Shift into this mode at any speed except when shifting from
4
4
2
.
4
4
2
Four-Wheel Drive LowF– Use when driving off-road in deep sand, mud or snow, or
on steep hills. Shift into or out of this mode when the vehicle is stopped or moving less
than 3 mph with the transmission in Neutral.
N Neutral – Use to dolly or dinghy tow the vehicle behind an RV. Refer to your Owner’s
Manual for the shift procedure.
See Driving and Operating in your Owner’s Manual.
DRIVER MODE CONTROLF/FOUR-WHEEL DRIVEF
F Optional equipment
ELECTRIC PARKING BRAKE
To apply the parking brake, press the
Parking Brake button on the left side of the
instrument panel.
To release the parking brake, turn on the ignition, press the brake pedal, and then
press the button.
See Driving and Operating in your Owner’s Manual.
A
B

14
DRIVER ASSISTANCE SYSTEMSF
Safety or driver assistance features are not a substitute for the driver’s responsibility to operate
the vehicle in a safe manner. The driver should remain attentive to traffic, surroundings and road
conditions at all times. Read your Owner’s Manual for important feature limitations and information.
SAFETY ALERT SEAT – The driver’s seat pulses — left side, right side or simultaneously —
to alert the driver of the direction of potential hazards.
Audible alerts or seat-pulsing alerts may be selected. To change the alert settings,
goto Settings > Vehicle > Collision/Detection Systems > Alert Type.
LANE CHANGE ALERT WITH SIDE BLIND ZONE ALERT – While driving, the system displays
awarning symbol on the left- or right-side mirror when a moving vehicle is detect-
ed rapidly approaching or is in that side blind zone. The warning symbol flashes if a turn
signal is activated when a vehicle has been detected on the same side.
To turn on or off, go to Settings > Vehicle > Collision/Detection Systems > Lane
ChangeAlert.
FORWARD COLLISION ALERT – The Vehicle Ahead Indicator is green when a vehicle
that you’re following is detected ahead and is amber when following a vehicle ahead much
too closely. When approaching a vehicle directly ahead too rapidly, a red alert flashes on
the windshield and the Safety Alert Seat pulses or rapid beeps sound (if selected).
Press the Forward Collision Alert button on the steering wheel to set the alert
timing to Far, Medium, or Near.
FOLLOWING DISTANCE INDICATOR – The
following distance to the vehicle ahead is
indicated in seconds under the Info menu
on the Driver Information Center. If no vehi-
cle is detected ahead, dashes are displayed.
AUTOMATIC EMERGENCY BRAKING – At
speeds below 50 mph, the system works
with Forward Collision Alert to help you
avoid or reduce the severity of a front-end collision with a vehicle you’re follow-
ing. Camera technology is used to automatically provide hard emergency braking or
enhance the driver’s hard braking.
To set Automatic Emergency Braking and Forward Collision Alert to Alert and Brake,
Alert, or Off, go to Settings > Vehicle > Collision/Detection Systems > Forward Collision
System.
LANE DEPARTURE WARNING – When crossing a detected lane marking without using a
turn signal in that direction, the system flashes an amber indicator on the instrument
cluster and the Safety Alert Seat pulses or beeps sound (if selected) on the side of the
lane departure direction.
To turn on or off, press the Lane Departure Warning button on the center of the
instrument panel.
See Driving and Operating in your Owner’s Manual.
F Optional equipment

15
DRIVER ASSISTANCE SYSTEMSF
FRONT AND REAR PARK ASSIST – During
low-speed parking maneuvers, the system
provides “distance to closest object” infor-
mation on the Driver Information Center
and the Safety Alert Seat pulses or a beep
sounds (if selected). When an object is very
close, the Safety Alert Seat pulses or a
continuous beep sounds (if selected).
To turn on or off, press the Park
Assist button on the center of the
instrument panel.
REAR CROSS TRAFFIC ALERT – When in Reverse, the system warns of detected cross-
traffic approaching in either direction by displaying a red triangle with directional arrow
alert on the infotainment screen and pulsing the left or right side of the Safety Alert Seat
or sounding beeps (if selected).
To turn on or off, go to Settings > Vehicle > Collision/Detection Systems > Rear Cross
Traffic Alert.
See Driving and Operating in your Owner’s Manual.
CRUISE CONTROLF
SETTING CRUISE CONTROL
Press the On/Off button. The
Cruise Control symbol will illuminate in
white on the instrument cluster.
When traveling at the desired speed,
rotate the thumbwheel down to set the
speed. The symbol will illuminate in
green on the instrument cluster.
ADJUSTING CRUISE CONTROL
+RES Resume/Accelerate
Rotate the thumbwheel up to resume a set speed. When active, rotate the thumbwheel
up to increase speed 1 mph; rotate and hold to continue increasing speed.
–SET Set/Coast
When active, rotate the thumbwheel down to decrease speed 1 mph; rotate and hold to
continue decreasing speed.
Cancel
Press the button, or press the brake pedal, to cancel Cruise Control without erasing
the set speed from memory.
The set speed is erased when Cruise Control or the vehicle ignition is turned off.
See Driving and Operating in your Owner’s Manual.
F Optional equipment

16
CAMERA SYSTEM FEATURES
The available camera systems feature up to 8 camerasFwith up to 15 viewsFto help
make it easier to hitch a trailer and provide better visibility while towing.
REAR VISION CAMERA
When the vehicle is in Reverse, a view of the area directly behind the vehicle displays on
the infotainment screen. Camera view buttonsFare at the bottom of the screen.
Touch the Guidance Lines/Hitch Guidance button to change guidelines.
Touch the Hitch View button for a zoomed-in view of the hitch area.
SURROUND VISION
F
The system uses multiple cameras to display
a high-resolution image of the area around
your vehicle along with front- and rear-camera
views on the infotainment screen. Camera view
buttons
F
are at the bottom of the screen.
Touch the Guidance Lines/Hitch
Guidance button to change guidelines.
Touch the Bed View button to check
cargo or to view guidelines to help when
hitching a 5th wheel or gooseneck trailer.
Zoom functionality also available.
To check available camera views when in Drive
above 8 mph, touch the Camera icon on the
infotainment screen and select the desired
view. Touch X to exit the view.
ADDITIONAL TRAILER CAMERA VIEWS
F
Multiple views to aid in trailering are shown
on the infotainment screen using the vehicle
cameras and up to two additional wired
Chevrolet accessory camerasFmounted on the
rear or interior of the trailer.
Touch the Rear Side View button for a
biased split view of each side of the trailer
(more of the left or right side will be shown
based on trailer position).
Touch the Transparent Trailer View
button for a view behind the trailer.
Compatible with most conventional box
trailers*; requires accessory cameraF.
Jack-Knife AlertF* – The Jack-Knife Alert displays a warning symbol when the truck/
trailer angle is in a possible jack-knife position and there is a potentially imminent
collision situation. The Safety Alert SeatFmay pulse or beeps may sound (if selected).
Note: Accessory camera system compatible with most trailer and hitch types.
Surround View screen
Transparent Trailer View screen
F Optional equipment required *Not compatible with all trailers
Bed View screen
See Driving and Operating in your Owner’s Manual.

17
REAR CAMERA MIRRORF
The rear camera mirror provides a wider, less-obstructed field of view than a traditional
mirror to assist when driving, changing lanes and checking traffic conditions.
A. On/Off
Pull or push the lever at the bottom of the
mirror to turn the video display on or off.
B. Selection Control
Press and release the button to select the
brightness, zoom, or tilt setting.
C. Adjustment
Press and release either button to adjust
the selected setting.
See Keys, Doors and Windows in your Owner’s Manual.
ABC
POWER MIRRORSF/TRAILERING MIRRORSF
POWER MIRROR ADJUSTMENT
Press the Mirror Selector button to
select the driver or passenger side
mirror; use the four-way control pad to
adjust the mirror.
POWER FOLDING MIRROR
Press the Folding Mirror button to
fold or unfold the mirrors.
TRAILERING MIRRORS
The mirrors can be extended for better
visibility when towing a trailer. The lower
wide-field view mirror adjusts manually.
MANUAL EXTENSION
F
To extend the manual mirror, grasp the
mirror housing and pull back and rear-
ward in one motion. The housing extends
on a curved arc. Push in the housing to
return the mirror to its original position.
POWER EXTENSION
F
Press the Power Extend button to extend or retract the power mirror.
Note: Reset the power mirrors if they are adjusted manually by using the power controls to fold/unfold
or extend/retract the mirrors to their normal position.
See Keys, Doors and Windows in your Owner’s Manual.
F Optional equipment

18 F
Optional equipment
MULTI-FLEX TAILGATE OPERATIONF
The tailgate has 6 functional positions to improve access to the cargo box. To operate
the tailgate, it must be unlocked or the key fob must be within 3 feet of the tailgate.
1. Primary Gate
Open the primary gate for access to the cargo box.
2. Primary Gate Load Stop
With the primary gate open, the load stop helps
keep longer items secure in the cargo box.
3. Easy Access
The inner gate folds down for easier reach into the
cargo box to access items near the cab.
4. Full-width Step
With the primary gate open, the inner gate folds
into a sturdy step (up to 375 lbs.) with a convenient
handle for easy cargo box entry and exit.
5. Inner Gate Load Stop
With the primary gate closed, fold the inner gate
for two-tier storage and open the load stop to help
keep longer items secure.
6. Inner Gate Work Surface
With the primary gate closed, fold the inner gate
for two-tier storage or for use as a standing-
height work surface.
OPEN THE INNER GATE
Press the upper button (A) on the tailgate.
Note: Do not lower the inner gate with the primary gate
open if a hitch ball or trailer is attached.
ENABLE/DISABLE THE INNER GATE
The inner gate can be
disabled to prevent
it from being opened
when a hitch or other
equipment is installed.
To disable or enable
inner gate operation,
press and hold the
upper button (A) for 3
seconds until the taillamps flash.
OPEN THE PRIMARY GATE
Press the lower button (B) on the tailgate.
Press the Power Tailgate button twice onthe
key fob.
Press the Power Tailgate button on the
center of the instrument panel.
1
2
3
4
5
6
A
B

19
OPEN THE PRIMARY GATE AND INNER GATE
Press the lower button and then upper button
(B then A) on the tailgate consecutively.
OPEN THE LOAD STOP OR STEP
Press the release bar (C).
F Optional equipment *Not compatible with all trailers
TRAILERINGF
MULTI-FLEX TAILGATE OPERATIONF
ADVANCED TRAILERING SYSTEM
F
The in-vehicle trailering app on the info-
tainment screen allows customized trailer
profiles with a variety of helpful towing
assistance features, including a hitching
and setup checklist, trailer tire pressure
and temperature monitoringF, trailer light
testing, Jack-Knife Alert*, Trailer Length
Indicator*, trailer theft detection and more.
Trailering App information also is available
with the myChevrolet mobile app.
Note: The Trailering App will monitor trailer presence, even while the vehicle is off, by periodically
checking the trailer lighting circuits. On trailers equipped with LED lights, these periodic checks may
cause the trailer lights to flash. This flashing will become more frequent if Theft Alert is enabled.
HITCH AREA LIGHTING
Press the Cargo Lamp button on the left side of the instrument panel to turn the
cargo bed lamp or conventional hitch lamp on/off.
TRAILERING INFORMATION LABEL
The Trailering Information Label, located
on the pillar between the driver and rear-
passenger doors, provides vehicle-specific
weight and capability ratings.
INTEGRATED TRAILER BRAKE CONTROL
(ITBC)
F
The ITBC system can be used to adjust the
power output, or Trailer Gain, to the trailer
brakes. The control panel is on the center of the instrument panel. ITBC information is
displayed on the ITBC page on the Driver Information Center.
Squeeze the control together to manually apply the trailer brakes.
Adjust the Trailer Gain by pressing the +/– adjustment buttons.
See Driving and Operating in your Owner’s Manual.
C
See Keys, Doors and Windows in your Owner’s Manual.

20
Download the myChevrolet app to your compatible smartphone (or device) and, if your
vehicle is properly equipped, you can use your device to start or turn off your engine, lock
or unlock your doors, view key diagnostic information, set parking information and more.
The app is available on select Apple and Android devices. Service availability, features
and functionality vary by vehicle, device and data plan. Device data connection required.
Visit onstar.com for more details. Download the mobile app from your compatible mobile
device’s app store.
ROADSIDE ASSISTANCE
1-800-CHEV-USA 1-800-243-8872 TTY Users: 1-888-889-2438
As the owner of a new Chevrolet, you are automatically enrolled in the Chevrolet
Roadside Assistance program for up to 5 years/60,000 miles, whichever occurs first, at
no expense to you. The Chevrolet Roadside Assistance toll-free number is staffed by a
team of trained advisors who are available 24 hours a day, 365 days a year to contact a
service provider for light services (fuel delivery, jump starts, flat tire and lock-outs) or
make arrangements to tow your vehicle to the nearest Chevrolet dealer for any repairs.
ONSTAR®ROADSIDE ASSISTANCE
If you have a current OnStar Safety & Security plan, press the blue OnStar button or red
Emergency button to get the help you need. An OnStar advisor will use GPS technology
to pinpoint your vehicle location and contact the nearest service provider.
To learn more about OnStar services, press the blue OnStar button, visit onstar.com, call
1-888-4-ONSTAR (1-888-466-7827), or refer to your Owner’s Manual.
CHEVROLET OWNER CENTER
Get to know your vehicle inside and out with the Chevrolet Owner Center. Check out
personalized information, including an online Owner’s Manual and helpful how-to videos,
track your service history and warranty status, manage your OnStar and Connected
Services vehicle plans, review your current Vehicle Diagnostics report (active service
required) and more. Create an account today at my.chevrolet.com.
MYCHEVROLET MOBILE APP
!84767839=A! 84767839 A
We recommend always using ACDelco or GM Genuine Parts.
Certain restrictions, precautions and safety procedures apply to your vehicle. Please read your Owner’s Manual for
complete instructions. All information contained in this guide is based on the latest information available at the time
of printing and is subject to change without notice. Copyright 2021 General Motors. All rights reserved.