Chewy frisco 804630 User manual

57 cm L x 41 cm W x 31 cm H
22.4 in L x 16.1 in W x 12.2 in H
Sku# 804630
Plush Cat Window Perch With
Removable Bolster
Product Manual

Assembly snoitcurtsnI Please read through all instructions before starting.
Until you finalize the perch location, do not fully tighten the
screws or secure the hook and loop on your window sill.
Parts Included
Prior to assembly, please be sure to identify and sort all parts shown below.
Call 1.800.672.4399 for questions
NO YES
Accessories
A
4 PCS bolt
M6 mm x 16 mm
2 PCS
non-skid pad
1 PC
Ø5 mm allen wrench
B
Important Note: The window perch can be installed on windowsills
with a width ranging from 3 to 7 inches and an overhang width ranging
from 0 to 1.5 inches.
Note: Plush cover with bolster can be assembled to front and back.
1
4
3
3
1 PC base board
with adjustable screw holes
20.1 inch x 14.2 inch x 0.8 inch
51 cm x 36 cm x 2 cm
2 PCS
metal bracket
1 PC
removable bolster
1 PC hook and loop
19.7 inch x 3.2 inch
50 cm x 8.1 cm
1 2 3 4

FINISHED ASSEMBLY
Assembly snoitcurtsnI
Call 1.800.672.4399 for questions
Step 1. Step 2.
Please read through all instructions before starting.
Until you finalize the perch location, do not fully tighten the
screws or secure the hook and loop on your window sill.
Step 3. Step 4.
Step 5.
1. Begin by measuring the location on your windowsill where the board will cover and mark it
using a pencil. This will serve as a guide during the installation process.
2. Remove the protective film from the hook and loop fastener and firmly press it into the
marked area.
Press the board onto the windowsill, ensuring a secure attachment.
The hook and loop should adhere firmly to the surface for optimal stability.
2
1. Begin by loosely attaching the adjustable bracket to the base board. Make sure to adjust the
bracket according to the size and dimensions of your windowsill.
2. Before securing the bracket to the board, ensure that the adjustable bracket makes complete
contact with the wall. This will create a secure and stable installation.
3. Once you have confirmed that the adjustable bracket is in full contact with the wall, proceed
to loosely secure the bracket to the board using the screws provided.
A
AA
After positioning the window perch on the windowsill, tighten each screw until they are fully
tightened. Check that the entire window perch is firmly and securely fixed in place. It should
not wobble or move when pressure is applied.
3
B
3
B
4
1
A
A
AA
A

Warning
& Cautions
Please read and follow all warnings and instructions to avoid pet
injury or property damage.
This is not a toy, not for use with children.
Keep all small parts away from children / pets to avoid choking
hazards.
For cat use only.
Should only be operated by a responsible adult.
Keep all tools and instructions in a safe place for future reference.
Follow the instructions carefully and make sure you’ve completed
each step.
Window perch should be placed on a flat level surface.
Check your window perch often for loose screws or parts that might
need re-tightening.
If your window perch gets torn or damaged, please discard it.
The product photo may vary slightly from your fully assembled
window perch as this product is continually being enhanced.
Cleaning
& Instructions
Window Perch: Spot clean with a damp cloth.
Cover and Bolster: Machine wash cold with like colors
on a gentle cycle. Do not bleach. Hang to dry.
Call our friendly customer service anytime.
We’re here 24/7 at 1.800.672.4399
Questions?