Seconique ABBEY DINING TABLE User manual

ABBEY DINING TABLE
ASSEMBLY INSTRUCTIONS
SEC/SW/04/21/OI1
Page 01
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND
PERIODIC MAINTENANCE AND CLEANING .
ASSEMBLE ON A SOFT CLEAN SURFACE
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME . THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT USE POLISH,
DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO
CONTACT WITH WET OR DAMP OBJECTS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD
MAKE THIS PRODUCT UNSAFE.
FOR DOMESTIC USE ONLY

ABBEY DINING TABLE
CARE AND MAINTENANCE INSTRUCTIONS
SEC/SW/04/21/OI1
Page 02
WARNING
IF THE GLASS IS CHIPPED OR BROKEN PLEASE REPLACE WITH TYPE DESCRIBED OR
ALTERNATIVELY CONSULT WITH THE RETAILER STATING THE MODEL DETAILS.
1. MAXIMUM LOAD ON TOP-DO NOT EXCEED 75 KGS IN WEIGHT.
2. DO NOT SIT OR STAND ON GLASS SURFACES.
3. DO NOT USE GLASS AS CHOPPING SURFACE.
5. DO NOT PLACE VERY HOT OR VERY COLD ITEMS ON THE GLASS SURFACE UNLESS
ADEQUATELY THICK TABLE MATS ARE USED TO PREVENT SUCH ITEMS COMING
INTO CONTACT WITH THE GLASS.
6. WHEN CLEANING GLASS PANELS USE A DAMP CLOTH OR LEATHER WITH WASHING
UP LIQUID OR SOFT SOAP IF NECESSARY. DO NOT USE WASHING POWDER OR ANY
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE
THIS PRODUCT INCLUDES TOUGHENED GLASS WITH A NOMINAL THICKNESS OF 8MM.
4. DO NOT STRIKE GLASS WITH HARD OR POINTED ITEMS.
OTHER SUBSTANCES CONTAINING ABRASIVES SINCE THESE SUBSTANTIALLY
SCRATCH GLASS.
7. THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE

HARDWARE LIST
Bolt
Washer
Allen Key
12PCS
12PCS
PARTS LIST
12
Page 03
SEC/SW/04/21/OI1

C
A
B
STEP 1
STEP 2
SEC/SW/04/21/OI1
Page 04
1 - x1
GLASS DINING TABLE TOP
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
A12
2 - x4
DINING TABLE LEG
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
2
2
2
2
1
B12

ABBEY DINING CHAIR
ASSEMBLY INSTRUCTIONS
SEC/SW/04/21/OI1
Page 01
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND
PERIODIC MAINTENANCE AND CLEANING .
ASSEMBLE ON A SOFT CLEAN SURFACE
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME . THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT USE POLISH,
DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO
CONTACT WITH WET OR DAMP OBJECTS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD
MAKE THIS PRODUCT UNSAFE.
FOR DOMESTIC USE ONLY
MAX CHAIR
WEIGHT
100KG

HARDWARE LIST
SEC/SW/04/21/OI1
Page 02
PARTS LIST
123
5
4
Bolts M6x40mm
Bolts M6x13mm
M5 Allen Key
M4x45mm Screws
2PCS
4PCS
4PCS
Part Number Part Description Quantity Carton
1
2
3
4
5
Le Leg 11/1
Right Leg
Chair Back
Crossbar
Chair Back
1
1
1
1
1/1
1/1
1/1
1/1
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.

M6x13mm
M6x40mm
C
B
A
B
STEP 1
STEP 2
SEC/SW/04/21/OI1
Page 03
1 - x1
LEFT LEG
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
B04
2 - x1
RIGHT LEG
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
A02
4 - x1
CROSSBAR
M6x13mm M6x40mm
1
2
3
3 - x1
CHAIR BACK

STEP 3
STEP 4
SEC/SW/04/21/OI1
Page 04
5 - x1
CHAIR SEAT
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
D04
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
5
D
D
D
D
D
MAX CHAIR
WEIGHT
100KG