Coaster 115271 B1 User manual

COASTER FINE FURNITURE
ASSEMBLY INSTRUCTIONS
Fine Furniture for every stage of life
PAGE 1 OF 4
REVISION 0 : 02/18/2022
COASTERFURNITURE.COM
115271(B1&B2)
Dining Table

ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
10 MINUTES
PARTS IDENTIFICATION
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact
the store immediately.
2. This product is for home use only and not intended for commercial establishments.
ITEM : 115271(B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
A
C
TOP
LEG FRAME
1PC
2PCS
COASTERFURNITURE.COM
PAGE 2 OF 4
BMOUNTING PLATE 2PCS
B1 (BOX 1)
B2 (BOX 2)
HARDWARE IDENTIFICATION
116PCS
4PCS
3
1PC
4
BOLT WITH BIG WASHER
(M6 x 45mm - BLK)
BOLT WITH SMALL WASHER
(M6 x 50mm - BLK)
FLAT HEAD SCREW
(M5 x 32mm - BLK)
ALLEN WRENCH
(M4 - GD)
210PCS
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 115271 (B1)
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.

ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
A
C
COASTERFURNITURE.COM
PAGE 3 OF 4
Protective surface
3
A
C
4
1
ITEM : 115271(B1&B2)

ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COMPLETE
A
COASTERFURNITURE.COM
PAGE 4 OF 4
4
2
C
B
ITEM : 115271(B1&B2)

COASTERFURNITURE.COM
ITEM : 115271(B1&B2)
41.75"
16.25"
27.50"63.00"
19.00"
5.75"
30.25"65.75"
27.50"
80.00"
30.00"
Note : Dimension tolerance ±5%