Argos habitat DAXTON 941/1834 User manual

DAXTON
Issue 1 - 05/05/21
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
0345 640 2020

Safety and Care Advice
Product Details
Daxton 3 Door 941/1834
2
Keep children and animals away from the work area, small
parts could choke if swallowed.
Make sure you have enough space to layout the parts before
starting.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
·This product has been constructed to be used in the domestic
not for commercial purposes.
Assemble on a soft level surface to avoid damaging the unit
Assemble the item as close to its final position (in the same
room) as possible.
We do not recommend the use of power drill
Parts of the assembly will be easier with 2
Dispose of all packaging carefully and
responsibly.
Additional Guidance
●Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
●Regularly check and ensure that all bolts and fittings are tightend properly.
●Warning:Maximum loading weight to each shelf is 6 kgs.
●This product is compliant EN 14749 / BS 4875-7.
Care and maintenance
●Only clean using a damp cloth and mild detergent.Do not use abrasive cleaners.
●Use a dry cloth to clean the product,furniture polish is not recommended.
●From time to time check that there are no loose screws,nuts or bolts.If there are please re-tighten.
●This product should not be discarded with household waste.
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United
Kingdom, MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J
Sainsbury's plc.
environment only and
or your floor.
Please be careful of the connecting screws or bars when
turning half assembled product upside down.
/ drivers for inserting screws as this could
damage the unit.Only use hand screwdrivers.
people.
Take to your local authority waste disposal centre.
WARNING:To prevent
possible overbalancing
this unit must
be secured to a wall
using the overbalance
protector kit supplied.
A unit that is allowed
to topple can cause
serious or fatal injury.
In addition to wall
fixing the unit,place
heavy items on the
lower shelves,do not
put any heavy objects
on top of unit and
never allow children to
climb or hang on
drawers,doors or
shelves.

M5x12mm Screw x 20
A
M4x8mm Screw x 6
B
M4x30mm Wall Mount x 2
C
Bag 1
Fittings (Shown to scale)
Tools required
Phillips screwdriver
(small & medium)
M4 Drill Heads
Ruler/tape
measure
Power Drill
Only used for
drilling walls
3
Large hammer

Panels and tubes
4
Left Side Panel x 1
1 2 Right Side Panel x 1 6Back Panel x 1
Front Bar x 2
3 4 Bottom Frame x 1 5Top Frame x 1
Bottom Panel x 1
7 8 Top Panel x 1
Door x 3
9 10 Inner Bar x 3

A
1
5
2
3
3
1
2
M5x12mm Screw x4
A
M5x12mm Screw x 20
A
M4x8mm Screw x 6
B
M4x30mm Wall Mount x 2
C

A
3
6
4
4
5
M5x12mm Screw x4
A

Turn
Product
A
A
5
7
6
6
M5x12mm Screw x6
A

A
7
8
M5x12mm Screw x4
A
8
Top View
7
7
Rotate
Product

Turn
Product
A
9
9
10
8
88
8
M5x12mm Screw x2
A

X3
C
C
9
11
10
M4x30mm Wall Mount x2
C
12

B
13
11
M4x8mm Screw x6
B
14
9
9
9
10
10
10
10

Note:Press and bend is necessary, otherwise the drawer will overturn.
15
12
16
2.Press and bend.
1.Make sure the press position is inside the
cabinet.

13