CHIEF MSB-6602 User manual

INSTALLATION INSTRUCTIONS
Chief Manufacturing, a division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
8840-000096 Rev01
©2008 Milestone AV Technologies
04/08
MSB-6602
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(2) Interface Side Brackets (2) Interface Center Brackets
(4) Mounting Buttons – Tapped (8) 10-24 x .500 Button Head Cap Screws
(4) M8 x 16mm Phillips Head Screws (1) 1/8” Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
1. Chief Q-latch Button Installation
Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket, to center brackets (four places) (see
Figure 2 & Figure3).
CAUTION!
Figure 1
Figure 2 Figure 3

2. Side Bracket Assembly: Attach center brackets to side brackets using the 10-24 button head cap screws (see
Figure 4 & Figure 5). Offset holes are provided incase the cross brackets need to be
shifted up or down.
3. Bracket Installation: Place nylon spacers over mounting holes of screen and attach brackets to back of display
using the M8 screws (see Figure 6 & Figure 7). Do not over tighten screws.
4. Follow the Chief mount instruction manual for screen installation.
Figure
4
Figure 5
Figure 6 Figure 7