CHIEF PSB-2533 User manual

INSTALLATION INSTRUCTIONS
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX [phone]
8401 EAGLE CREEK PKWY, STE. 700
SAVAGE, MINNESOTA 55378 USA
8804-000280 RevC
©2005 Chief Manufacturing
www.chiefmfg.com
10/05
PSB-2533 & PSB-2535
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.
Figure 1
(2) Side Interface Bracket (2) Top/Bottom Bracket
(4) Mounting Buttons-10-24 Tapped (4) 10-24 x .5 Button Head Cap Screw
(8) ¼-20 x .5 Phillips Head Cap Screw (7) M6 x 40mm Phillips Pan Head Screw
(6) .74 x .39 x 1.0 White Nylon Spacer (1) 1/8” Allen Key
(1) 10mm x M6.3mm x 28mm Black Nylon Spacer
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
CAUTION! DISPLAYS ARE EXTREMELY FRAGILE.
WARNING! ALL COMPONENTS MUST BE SECURELY FASTENED TO A STRUCTURAL
MEMBER CAPABLE OF SUPPORTING 4 TIMES THE COMBINED WEIGHT OF
ALL COMPONENTS PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE INTERFACE IS
175 POUNDS (79.38 KG).
1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with chamfered hole
of mounting button (larger surface) facing bracket, to top and bottom brackets (four places) (see Figure 2 and Figure 3).
Figure 2
Figure 3

Installation Instructions PSB-2533 and PSB-2535
2
2. Using eight ¼-20 Phillips head cap screws, attach top and bottom to side brackets (see Figure 4 and Figure 5).
Figure 4 Figure 5
3. Place (6) white Nylon spacers over side mounting holes and (1) black Nylon spacer over the top center mounting hole
on back of screen and attach the mounting brackets to the display using (7) M6 screws (see Figure 6 and Figure 7).
4. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting brackets with
slots in the Chief Mount. You may need to connect power and other input/output cables before installing screen onto
mount.
5. Lower safety latch on the Chief Mount to secure your display, making sure latch is completely.
Figure 6
Figure 7