CHIEF PSM-2022 User manual

INSTALLATION INSTRUCTIONS
CHIEF MANUFACTURING INC. 8805-000033 REV. B
1-800-582-6480 952-894-6280 FAX [phone] Chief Manufacturing
8401 EAGLE CREEK PKWY, STE. 700 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 05/06
DISPLAY STATIC MOUNT
PSM-2022
(1) Static Mount Bracket (4) Mounting Buttons
(1) 10-24 x .5 Flat Head Undercut Screw (1) Nylon Washer
(1) Latching Flag (1) 10-24 Nylock Nut
(4) .875 x .330 x .375 Nylon Spacer (4) M8 x 35mm Button Head Cap Screws
(4) M8 x 25mm Button Head Cap Screws
BEFORE PROCEEDING: Unpack the carton, verify contents shown in Figure 1 and read
installation instructions completely. If you are missing any of the listed components, please
contact Customer Service at 1-800/582-6480.
Displays are Extremely Fragile.
1. Attach latching flag to mount using the 10-24 Phillips flat head screw, Nylon washer, and
Nylock nut (see Figure 2). Tighten until friction will hold the flag in place.
CAUTION!
Figure 2
Figure 1

2. Attach mounting buttons to display using four M8 screws provided (see Figure 3 & Figure 4).
Use longer screws and spacers if necessary.
3. Securely anchor the static mount to wall studs or supporting framework (see WARNING).
4. Make sure the flag is lowered before attempting to place the screen on the mount.
5. With the aid of another person, lift the display up to the mount, align the mounting buttons on
the screen with the teardrop slots in the mount, and set the screen into place (see Figure 5).
6. Position (raise) the flag to secure the display.
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4 TIMES
THE COMBINED WEIGHT OF ALL COMPONENTS PLUS THE
EQUIPMENT BEING MOUNTED. IF IT CANNOT SUPPORT
THIS WEIGHT, THE STRUCTURE MUST BE REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE MOUNT
IS 175 POUNDS (79.38 KG).
Figure 5
WARNING
Figure 3 Figure 4