I ntercom-mode
6. Operatlon
(1) Status lndicator
Com-s i
(2) Talk and Unlock
The visitor presses the 'call' button of the outdoor camera, in door
monitors will sound melody and show the image of visitor.
A. Press "monitor" key to turn off the screen and enter into standby
mode to ignore visitor.
B. Press 'call' key to talk to visitor, and press 'unlock' key to open the
door.
(3) Monitor
Press 'monitor' key to wake up at the status of standby.
(4) take picture
A. take picture
Press" capture" key to take pictures, pictures to be saved
automatically after'call' button pressed. The first picture to be replaced
6
once available memory exceeded.
B. Playback mode and Delete photos
Press 'capture' key for 2 seconds to enter playback mode; press
lefr/right key to select image, and press 'capture' key to delete image,
and press 'capture' key for another 2 seconds to exit playback mode.
(4) Charge
Battery to be charged once battery indicator turns from gr€en to
red,
7. lnstallatlon
(1) Recommended location: avoid direct light shinning and strong rain,
proper installation height around 1.5m
(2) Set Unlock timer A . Unlocking time is 1 second (default value, all
switch is on the below)
B . Unlocking time is 4 second (the first switch is on
the top , the rest two is below)
C . Unlocking time is 8 second (the second switch is
on the top , the rest two is below)
(3) Choose lock : Choose unlock wire and adaptor of power-off or
power-on unlocking, user must according to the power of the lock to
select appropriate power lock.
I
l