chinavasion ES-HD-10D-IP851 User manual

1/11
ES-HD-10D-IP851
Quick Installation User Manual
V1.0
2016-01-04

2/11
Contents
Ⅰ. About IP Camera......................................................3
Ⅱ. Start The Camera.....................................................4
Ⅲ. Operate the camera on computer end....................5
Ⅳ. Viewing The Camera Via Mobile APP...................7
Ⅴ.WIFI Configuration..................................................8
Ⅵ. Install Micro Card ...................................................9
Ⅶ.Micro SD card video setting...................................10
Ⅷ. Reset the camera to factory default......................11

3/11
Ⅰ. About IP Camera
1.1 When receiving the IP Camera,pls check the packing details are including
below accessories:
1.2 Interface Introduction
Power adaptor*1
CD software*1
User manual*1
Screws *1
WiFi antenna*1
If the accessories in the
color box is damaged
or loss, please contact
the sales in time.

4/11
Ⅱ. Start The Camera
2.1 Connect the network cable to the router, and plug the power adapter to the
socket.
2.2 Connect the other end of the network cable and the power adapter to the
camera to get it work, it will take about 1 minutes for the camera to sel-check.
Network status light
Green Light：power light
Yellow light：data transmission status

5/11
Ⅲ. Operate the camera on computer end
3.1 Install the Search Tool from the CD, then open the software and search the
camera.
3.2 click “Next”, can change the camera network configuration.
Double click the camera IP address, the camera can be connected
to the browser.
Default user name：admin Default password：admin

6/11
3.3. Viewing the camera via browser
3.4. Control the camera in CMS
Viewing the image, configurate the camera
CMS software can be found in the CD.

7/11
Ⅳ. Viewing The Camera Via Mobile APP
4.1 Download the APP “CamHi”in Google Play or APP Store, or scan the QR
code to download.
4.2 Click“+”to add camera, then input the camera UID and password(default
password is admin)
4.3 After successfully add the camera, click the camera picture on device list, you
will see the real-time video.
Scan the QR code on the
label of the camera to add
the camera UID quickly.
Slide the screen, can
rotate the camera.
CamHi

8/11
Ⅴ.WIFI Configuration
5.1 Click WiFi setting to configure the camera Wifi on mobile phoneAPP.
5.2 Wifi configuration on browser
Click Parameter setting--wifi setting—open WIFI—click search，select the Wifi
to be connected，then input the WiFi password，click apply.
Please remove the network cable after one minutes when the wifi setting is done.

9/11
Ⅵ. Install Micro Card
6.1 Remove the white circle and the screws
6.1 Insert the SD card into the slot.

10/11
Ⅶ.Micro SD card video setting（mobile phone APP）
7.1 Alarm recording setting.
7.2 Time recording setting
Micro SD card recording also can be set up on web browser, please
refer to detailed user manual.

11/11
Ⅷ. Reset the camera to factory default.
8.1 Use reset button
Press reset button for 15 seconds，then loosen，the camera will reboot and restore
to factory default.
8.2 In web browser, find the Parameter settings-System settings-Initial settings,
click to reboot or reset the camera to factory default.
Detailed instructions, please browse CD information!