Chinavision CVTM-C182 User manual

OPERATION MANUAL
@@@@@
Please read this Manualthoroughly before using
this product and keep it well for future reference.

rc
,itry
Thank you for purchasing our products. To enjoy al the
features of this product and ensure it free of fault as long as
possible, please read this Manual thoroughly and follow the
instructions herewith accordingly:
1 . No parts of this product can be repaired by user himself . ln
case of faults, shut off the power immediately, and consult
us or our dealers, As this product is made of precise electronic
components, unauthorized detachment or reassembly may
damage it.
2.Do not expose this device in moisture, dirt,smoke,vapor
or direct sunshine.
3. Do not use thinner or other chemical cleaner to clean the
device. Please use soft cloth to clean the dirt if any on the
device.
4.Keep the monitor far from extremely hot or cold places,
storage temperature of this device is -20C -+65C.
5.Avoid dropping or bumping this device .
X< GAUTIONS:
For your safety, driver please do not watch the Monitor while
you are driving
DEWII{G,
When environmental temperature declines dramatically,
dew may occurinside the monitor, user need wait for a
minute till the moisture vapors, then the device will return
to good condition.
Te crh,nrici[, parameters
Oltl IXSTALLATION
. We strongly recommend have qualified technician or
maintenance engineer install this device.
. lf this monitor does not work well, check the connection
first, then the fuse if it the connection is ok.
. Improper installation of this Monitor may cause battery
leakage or short circuit.
lf you have any query or question about this machine,
please consult your nearest dealer.
ADDITIONAL I NFORMATIOII
Precautions of remote controller
.Do not place the remote controller on dashboard, steering
wheel or any other place under direct sunlight especially in
summer, where there is high temperature which may deform
the remote controller.
. When parking the car in the sun, please place the card-style
remote controller in toolkit or other safe places.
. When exposed in direct sunlight, signal emitting from the
remote controller may not be properly received by the
TYPE 7i nch 9inch
Definition 48OW X RGB X234 H640W X RGB X234 H
System PAL/NTSC PAL/NTSC
Nominal voltaoe 12V 12V
Power consumption 6W MAX 6W MAX
Way of control Touch button Touch button
Purpose Monitor and vehicle entertainment Monitor and vehicle entertainment
Workinq environmen -20C -+65C -20C -+65C
Brig htness 250 cdlmz 300 cd/m2
Contrast 300:'l 300:1

,iiilmonitor. lt should be place nearer to the inductor of frontal
panel of the host.
ON LCD
. Do not press the screen of LCD, otherwise distortion or
other fault may occur. the image may become unclear or
LCD may be damaged.
. Precautions of cleaning
Uses a little wet soft cloth to clean the screen.
Do not use solvent such as gasoline, thinner, cleaner in
market or anti static spray to clean the screen.
Do not use this product when environmental temperature is
lower than -20'C or higher than 65C
. lf you park your car in an extremely cold or hot place, the
video may become unclear, it is not a fault, when the
temperature in car returns to normal level, the video will
become clear.
. Static blue or red spot may appear on the monitor, this is
called light spot, it is a common phenomenon for any kind
of LCD. LCD is a very precise device, more than 99.99%
segment is normal, but less than 0.01 a segment may be
flaw, however, this will not affect your visual effects.
A.PPEiRANCE
lR transmitte
AV2
input select
yut,RE,'cot{ilEcrio,x
[- E-
1 Yellow:Video in 1
2 Red :Audio in
3 White:Video in 2
4 Black line : GND
5 Red line:DC12V
6.Brown line: Back camera control
7 Green line : Brake control(optional)
Remark:
e Black line function: When backing the car,the monitor will
automatically power on.and showAV2 picture(AV2 connect rear
view camera)
@ Green line function : Brake control, when the grip is up, the
monitor will show picture, when the grip is down, monitor will
display blue screen.
BRAGKET I1{STALLATION
il
I
I
1
2
3
4
5
6
7
+
5r%
Base Support lnstallation;
Take out the square nut from
the knob ofthe base support,
put it in the slot of the back of
the unit. Rotate the knob of
base support clockwise
direction with the square nut
in the slot to fix the unit.
The unit use touch button, Just touch the buttons with finger to operate it.
4m

-w
Rg,U O.rrt C6'iITROL,LE,RTO.PERAT t o N
Volume
MENU adjust
adj ust
Power switch
AV1/AV2 select
Display MODE shift
M,ENU r,il,iiiuctlox
Press MENU show list:
BRIGHT*CONTRAST - COLOR* TtNT * SYS3 *MODE *SLEEp
Press VOL-/VOL+ a6jr"1.
REPLACE BATTERY
ln normal conditions, the battery has 1 year life (or shorter,
it depends on the operating conditions). The lower the power
of battery is , the narrower the working range of the power is.
Precautions of lithium battery
. Please keep the battery out of reach of children, if children
has swallowed the batteries, Please ask doctor for help.
. Clean the batteries with dry cloth so as to ensure they are
in good contact.
. When installing batteries, make sure they are properly fit
in polarity.
. Do not use metal clamp to clip the batteries, in order to
prevent short circuit.
* WARNINGS!
lf improperly handled, the batteries may explode, do not
charge the batteries, decompose them or put it into fire.
I nstallation procedures of batteries:
. Take out battery card: press down the card bolt, pullout
the battery card
' Replace the batteries: place in battery card, with anode(+)
upward
. lnsert battery card: insert the battery card to the original
place
PAGKAGII{G.LIST
Back of remote controller
SN NAMES OUANTITY
1Host 1
2Remote Control 1
3Operation Manual 1
4Composite Cable 1
5Bracket (optional) 1