ChooChoo ST19001-BR User manual

Console Table
ST19001-BR/ST19001-WH
www.choochoofurniture.com

Assembly Instructions
We have designed our furniture with you,the customer in mind.Our clear,
easy to follow step by step instructions will guide you through the project
from start to finish. Feel confident that this will be a fun and rewarding project.
The final product will be a quality piece of furniture that will go together smoothly
and give years of enjoyment.
If you have any questions just email us at
[email protected]
Find more services please visit
www.choochoofurniture.com
Please do not return to the store
Broken or missing Hardware?
Neen help with Assembly?

Completed Assembly
Parts Description
1
2
3
3
4
5
4
5
55
6
6
6
6

4
1
Top Panel 1pc
2
Bottom Panel 1pc
3
Support Bar 2pcs
Support Bar 2pcs
5
Connector 4pcs
6
Leg 4pcs

6x40mm
Bolt 8pcs
Bolt Washer 8pcs Foot Pad
Cam Bolt 10pcs
A B
6x60mm
Bolt 4pcs
D
Lock Nut 4pcs
E F
G
Bolt Washer 8pcs
H I
J K L
C
Cam Lock 10pcs
4x25mm
Screw 16pcs
M
4pcs
N
Wrench 1pc Screw 1pc
4x35mm
2.5x12mm
Screw 1pc
Anchor 1pc
Anti-tip Bracket 1pc

Thank you for purchasing our product!
SAFETY PRECAUTION
Email:[email protected]
ASSEMBLY PREPARATION
TIPS FOR ASSEMBLY
Assembly Time
(Approximate)
CARE AND MAINTENANCE
(Not Provided)
Phillips Screwdriver
Flat Screwdriver
0.5

Cam-bolt head needs to be in cent r
Panel
Instruc�ons For Fastening
Cam Bolt and Cam Lock
Cam Bolt
Place Cam Bolt on the designated pre-drilled hole on the panel. Use a Phillips
Screwdriver to screw in Cam Bolt ver�cally un�l shoulder is snug and flushed
with panel. Do not over-�ghten or under-�ghten Cam-bolt. See illustra�ons below.
Shoulder is flushed
(on the same level)
with the panel.
CAM-LOCK
Align the arrow on the Cam-lock to the
Cam-bolt head and insert the Cam-lock.
Use a Flat-head Screwdriver to turn Cam Lock clockwise
to lock onto the head of the Cam Bolt. Turn un�l it is
snug (about a half turn) – over-�ghtening could damage
Cam Lock and/or Cam Bolt.
Shoulder is
above the panel.
CAM BOLT CAM LOCK
Note: Please do not use any power tools. Use of power tools may cause damage and
void manufacture warranty.

1
Top Panel
A×10
Step 1 Screw Cam Blot (A) onto Top Panel (1).
5
Connector
Step 2 Attach Connector (5) to Support Bar (3) with Screw (C).
Gently screw cam
bolt into the
threaded anchor.
3 Support Bar
C×8
A
A
A
AA
A
AA
A
A
1
C
C
C
C
3
5
5C
C
C
C
3
5
5

E×4D×4
B×8
Step 3 Attach Support Bar (3) to Top Panel (1) by inserting
Cam Lock (B) into Support Bar (3). Rotate clockwise to
secure Cam Lock (B) in place.
Step 4 Attach Leg (6) to Bottom Panel (2) with Bolt (D) and
Lock Nut (E). Screw tight Bolt (D) with Wrench (J).
J×1
2 Bottom Panel
6 Leg
1
3
B
B
B
B
1
3
B
B
B
B
D
D
D
D
E
E
E
E
6
6
6
6
2
D
J

B×2
C×8
④
Support Bar
Step 5 Put Leg (6) in place as shown.
Step 6 a) Attach Support Bar (4) to the assembly by inserting
Cam Lock (B). Rotate clockwise to secure
Cam Lock (B) in place.
b) Screw in Screw (C) to Connector (5).
2
1
1
2
4
B
4B
5
C
C

Step 7 Screw Bolt (F) to Connector (5) with Bolt Washer (G & H).
Note: Pay attention to the order of Bolt Washer (G & H).
F×8
G×8
H×8
J×1
JF
G
H

Step 8 a) Attach Anti-tip Bracket (M) to Top Panel (1) with
Screw (N).
b) Drill a hole into wall slightly smaller than Anchor (L)
c) Gently tap Anchor (L) into the wall
d) Fasten Anti-tip Bracket (M) to the wall with Screw (K).
K×1
L×1
M×1
N×1
K
L
N
M

Completed Assembly