Christopher Ward C60 Bronze Ombre Green COSC LE User guide

C60 Bronze Ombré Green COSC LE
Owner’s Handbook

1
Time on your side
Your Christopher Ward watch has been designed in Britain
and engineered in Switzerland by highly talented craftspeople.
This ensures not only accurate and precise timekeeping, but also
brings a real pride of ownership that only watches of the highest
quality standards can hope to deliver.
You have made an investment, a good one, and the aim of this
manual is to help you make the most of that investment in what
we hope will be a lifetime of ownership.
Mike France
CEO & co-founder
Time on your side

22

3
C60 Bronze Ombré Green COSC LE
That’s rather a beautiful watch you’ve got there.
Of course, you don’t need us to tell you how fantastic that ombré
dial looks. Or how the hunter-green palette provides a perfect
contrast to the handset and indexes. Or that the 42mm bronze
Light-catcher™case wears small and snug despite its generous size.
In fact, you probably think you know all there is to know about the
C60 Bronze Ombré Green COSC LE. What you don’t know yet is how
much you’ll fall in love with it.
From the moment you strap it on, the bronze case will develop
its own unique patina, which not only protects it from corrosion,
but changes its appearance over time. Meanwhile, the
hunter-green ombré dial has been distressed by hand, meaning
no single dial is the same as another. It really is one of a kind.
All watches take on elements of their owners, but few do it so
beautifully as your C60 Bronze Ombré Green COSC LE. From the
unique dial to that ever-changing bronze case, this is a watch that
could only be yours.
Enjoy your time together.

4
Features
• Limited edition of 500 pieces
• Swiss made
• 26 jewel self-winding mechanical
movement
• 38-hour power reserve
• Twin-ag engraving over ‘Colimaçoné’
nish on the rotor
• Anti-shock system
• Brushed bronze alloy case
• Bronze sandblasted bezel with raised
polished numbers
• Anti-reective sapphire crystal
• Central hacking seconds
• Date calendar
• Hand-nished matte green ombré dial
• Deep-stamped, screw-down crown
• Deep-stamped marine-grade stainless
steel caseback
• Unique engraved serial number
• Brushed and diamond polished hands and
indexes
• Signature Trident counter-balance on
polished seconds hand
• Super-LumiNova®Grade X1 GL C1-lled
hands, indexes and bezel triangle
• Eco-friendly luxury presentation case and
owner’s handbook

5
Technical Information
Calibre Sellita SW200 COSC
Case Bronze/steel
Diameter 42mm
Height 13.4mm
Lug to lug 49.3mm
Weight 95g
Water resistance 60 ATM (600 meters)
Vibrations 28,800 per hour (4Hz)
Timing tolerance -4/+6 seconds per day
Strap width 22mm

6
How to operate your C60 Bronze Ombré Green COSC LE
For a superior water resistance your crown is of the screw-down
type. The crown should sit ush to the case (position 1) in order
to maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2for winding in power. Wind in a clockwise direction to re-power
the watch. Your C60 Bronze Ombré Green COSC LE has a
maximum power reserve of 38 hours when fully wound. Normal
wearing will allow the rotor to start re-powering the watch over
time after putting on your wrist.
• Pull gently into position 3. For rapid date correction, turn in a
clockwise direction.
• Pull gently into position 4. This position is used for handsetting
and stopping of the seconds hand. For precise time setting it is
recommended to pass beyond the desired minute and to set the
hand backwards.
Setting the time and date

7
1 2 3 4
Unscrew and then pull
PLEASE NOTE:
Date correction should not be carried out between 20.00 hr and
02.00 hr as the watch gearing will already be aligning itself to
change the date. The crown should always be pushed in after
adjustment, and it is best to do so from position 3to avoid
advancing beyond the desired date. You must always ensure the
crown is fully tightened before any use in water.
1. Crown screw-down position
2. Manual winding
3.Date setting
4.Time setting

8
If using the bezel for a dive and let’s say the recognised maximum
“no-stop time” is 55 minutes, then in this example (shown right)
the time at the surface immediately before the dive is 10.08am.
However the bezel marker is at the 12.00 hr position.
• Move the bezel marker anti-clockwise so that it aligns with the
8 minute position.
• You can now read that the 55 minute no decompression limit
will occur at 3 minutes past the next hour.
Diving with your watch
PLEASE NOTE:
It is always useful and best practice to make a note on a dive slate
before entering the water and to carry a set of dive tables should the
dive plan change during the course of a dive. A safety stop for 3 to 5
minutes at 15ft is recommended at the end of all dives. A safety stop
for 3 minutes at 15ft is required any time you come within 3 pressure
groups of a no decompression limit, and for any dive to a depth of
100ft or deeper.
How to operate your C60 Bronze Ombré Green COSC LE

9
Bezel marker No decompression limit
Start of dive