Christopher Ward C60 Trident Bronze User guide

C60 Trident Bronze
Owner’s Handbook

1
Time on your side
Your Christopher Ward watch has been designed in Britain
and engineered in Switzerland by highly talented craftspeople.
This ensures not only accurate and precise timekeeping, but also
brings a real pride of ownership that only watches of the highest
quality standards can hope to deliver.
You have made an investment, a good one, and the aim of this
manual is to help you make the most of that investment in what
we hope will be a lifetime of ownership.
Mike France
CEO & co-founder
Time on your side

22

3
C60 Trident Bronze
The C60 Trident Bronze is a one-of-a-kind diving watch.
Not because of its water-resistance to 600m. Or the accuracy
that comes with being powered by the Sellita SW200-1 automatic
movement.
But because the materials and processes at its heart are by their
nature unique.
Take the bronze case. Used in early diving helmets, bronze is an
alloy, primarily made of copper, with 12-15 percent tin, making
it both durable and resistant to salt-water corrosion. Best of all,
it ages beautifully, developing a unique patina that increases
over time.
The dial reinforces the bespoke credentials. Each one has been
distressed by hand, delivering a one-of-a-kind textured surface.
Combined with the patina on the case, your C60 Trident Bronze
is an authentic limited edition of one.
All this adds up to one thing: the watch you hold today will be a
subtly dierent proposition in a couple of years. And like a pair of
selvedge denim jeans that have faded with use, all the better for it.
So while it might have been instant attraction with the C60 Trident
Bronze, as time passes we hope it’ll develop into something like
a lifelong love aair.
Enjoy the watch!

4
Features
• Swiss made
• Self-winding mechanical movement
• 38-hour power reserve
• Brushed bronze case
• Unidirectional bronze sandblasted bezel
with raised numbers
• Embossed screw-in crown
• Screw-down deep-stamped 3D backplate
• Unique engraved serial number
• 3.4mm anti-reective sapphire crystal
• Central hacking seconds
• Date calendar
• Ombré dial with ‘twin ags’ matte nished
at 12 o’clock
• Top-brushed indexes with diamond
polished facets
• Sandblasted and polished hands
• Signature Trident counter-balance on
seconds hand
• Super-LumiNova®Grade X1 GL C1-lled
hands and indexes
• Eco-friendly luxury presentation case and
owner’s handbook

5
Technical Information
Calibre Sellita SW200-1
Case Bronze
Diameter 40mm
Height 12.95mm
Lug to lug 47.46mm
Weight 83g
Water resistance 60 ATM (600 metres)
Vibrations 28,800 per hour (4Hz)
Timing tolerance -20/+20 seconds per day
Strap width 20mm

6
How to operate your C60 Trident Bronze
For a superior water resistance your crown is of the screw-in type.
The crown should sit ush to the case (position 1) in order to
maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2for winding in power. Wind in a clockwise direction to re-power
the watch. Your C60 Trident Bronze has a maximum power
reserve of 38 hours when fully wound. Normal wearing will allow
the rotor to start re-powering the watch over time after putting
on your wrist. After a period of non-use we recommend that
you manually wind the watch at least 20 times to ensure there
is sucient power in the watch before the rotor maintains the
power.
• Pull gently into position 3. For rapid date correction, turn in a
clockwise direction.
• Pull gently into position 4. This position is used for handsetting
and stopping of the seconds hand. For precise time setting it is
recommended to pass beyond the desired minute and to set the
hand backwards.
Setting the time and date

7
1234
Unscrew and then pull
PLEASE NOTE:
Date correction should not be carried out between 20.00 hr and
02.00 hr as the watch gearing will already be aligning itself to
change the date. The crown should always be pushed in after
adjustment, and it is best to do so from position 3to avoid
advancing beyond the desired date. You must always ensure the
crown is fully tightened before any use in water.
1. Crown screw-in position
2. Manual winding
3.Date setting
4.Time setting

8
How to operate your C60 Trident Bronze
If using the bezel for a dive and let’s say the recognised maximum
“no-stop time” is 55 minutes, then in this example (shown right)
the time at the surface immediately before the dive is 10.10am.
However the bezel marker is at the 12.00 hr position.
• Move the bezel marker anti-clockwise so that it aligns with the
10 minute position.
• You can now read that the 55 minute no decompression limit
will occur at 5 minutes past the next hour.
Diving with your watch
PLEASE NOTE:
It is always useful and best practice to make a note on a dive slate
before entering the water and to carry a set of dive tables should the
dive plan change during the course of a dive. A safety stop for 3 to 5
minutes at 15ft is recommended at the end of all dives. A safety stop
for 3 minutes at 15ft is required any time you come within 3 pressure
groups of a no decompression limit, and for any dive to a depth of
100ft or deeper.

9
Bezel marker
No decompression limit
Start of dive