Christopher Ward C60 Anthropocene GMT User manual

1
Time on your side
Your Christopher Ward watch has been designed in Britain
and engineered in Switzerland by highly talented craftspeople.
This ensures not only accurate and precise timekeeping, but also
brings a real pride of ownership that only watches of the highest
quality standards can hope to deliver.
You have made an investment, a good one, and the aim of this
manual is to help you make the most of that investment in what
we hope will be a lifetime of ownership.
Mike France
CEO & co-founder
1

2222

3
C60 Anthropocene GMT
Every watch says something beyond telling the time.
And your C60 Anthropocene GMT is no exception.
Inspired by Christopher Ward Challenger, Tom Hicks, the
C60 Anthropocene GMT is both a robust timing instrument –
and a reminder of the fragility of the planet we live on.
Water-resistance to 600m. A Light-catcher™case that sits snug on the
wrist. A frosted sapphire dial that recalls the look of Arctic pack ice.
And power from the exceptional Sellita SW330-2 GMT movement that
not only lets you monitor two time zones at once but also gives you a
56-hour power reserve.
The C60 Anthropocene GMT – ‘Anthropocene’ is the name of the era
in which humans have aected the environment – won’t solve the
climate crisis on its own. But take comfort that you’re supporting
those who are trying to reverse the damage our species has done,
one precisely measured tick at a time.
3

4
Features
• Swiss made
• 25 jewel self-winding mechanical
movement
• Up to 56-hour power reserve
• GMT complication
• Date calendar
• Central hacking seconds
• Anti-shock system
• Twin-ag engraving over ‘Colimaçoné’
nish on the rotor
• Elaboré ‘Colimaçoné’ nish on the
movement
• Frosted sapphire crystal dial with
twin-ags logo at 12 o’clock
• Super-LumiNova®Grade X1 BL C1-lled
hands and indexes
• Top-brushed gunmetal indexes with
diamond polished facets
• Signature Trident counter-balance on
seconds hand
• Brushed and polished Light-catcher™
stainless steel case
• Anti-reective sapphire crystal
• Embossed screw-down crown
• Eco-friendly luxury presentation case and
owner’s handbook
4

5
Technical Information
Calibre Sellita SW330-2
Case Stainless steel
Diameter 42mm
Height 14.3mm
Lug to lug 49.32mm
Weight 95g
Water resistance 60 ATM (600 metres)
Vibrations 28,800 per hour (4Hz)
Timing tolerance -20/+20 seconds per day
Strap width 22mm
5

6
How to operate your C60 Anthropocene GMT
6
For a superior water resistance your crown is of the screw-down
type. The crown should sit ush to the case (position 1) in order
to maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2for winding in power. Wind in a clockwise direction to re-power
the watch. Your C60 Anthropocene GMT has a maximum power
reserve of up to 56 hours when fully wound. Normal wearing will
allow the rotor to start re-powering the watch over time after
putting on your wrist.
• Pull gently into position 3. For rapid date correction, turn in an
anti-clockwise direction. To set the GMT hand, turn the crown
clockwise and rotate the hand until you have reached the desired
time indication. The GMT hand moves in one-hour increments.
• Pull gently into position 4. This position is used for handsetting
and stopping of the seconds hand. For precise time setting it is
recommended to pass beyond the desired minute and to set the
hand backwards.
Setting the time, date and GMT hand

7
1 2 3 4
PLEASE NOTE:
Date correction should not be carried out between 20.00 hr and
02.00 hr as the watch gearing will already be aligning itself to
change the date. The crown should always be pushed in after
adjustment, and it is best to do so from position 3to avoid
advancing beyond the desired date. You must always ensure the
crown is fully tightened before any use in water.
Unscrew and gently pull
7
1. Crown screw-down position
2. Manual winding
3.Date/GMT setting
4.Time setting

8
How to operate your C60 Anthropocene GMT
Using the GMT hand for travel
Set the time in your new destination by pulling the crown into
position 4and move the hour/ minute hands until they indicate the
desired time.
Push crown into position 3and wind, clockwise, the GMT hand
around the 24-hour scale on the bezel until you have the right time
at home. E.g. If you’re travelling from London at 12.10 to New York,
you would turn the hour/minute hands to 7.10 (New York time is
ve hours behind London) and wind the GMT hand around to the
12.10 position.
Once set, it means that, for example, you can gauge the time to
ring your friends and family without waking them in the middle of
the night.
PLEASE NOTE:
The table opposite can be used to determine the appropriate time
zone when setting the hour/minute hands.
8

99
International
dateline
-12
24h01h02h03h04h05h06h07h08h09h10h11h12h13h14h15h16h17h18h19h20h21h22h23h24h
-11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +10 +11 +12
99

10
How to operate your C60 Anthropocene GMT
Straps and bracelets
As you would expect, we place as much
emphasis on the quality of our straps and
bracelets as we do our watches. We only
use the nest materials in our straps,
with quick-release pins also included for
your convenience.
The following guidelines explain how easy
it is to use, adjust and replace your
Christopher Ward strap or bracelet.
1. Locate the quick-release pin (or pins)
on your strap (A) or bracelet (B).
Pull the pin(s) inwards to detach.
2. To reattach your strap (C) or bracelet (D),
pull the pin(s) inwards, and align the
spring bars so that they click securely into
the lug holes on each side.
Using the quick-release pins on your strap/bracelet
A B C D
10