Chromalox GR-14TW User manual

(Supersedes )
PG437-1
VTS
161-304901-005
MAY, 2003
4
DATE
SALES
REFERENCE
DIVISION SECTION
Chromalox
®
(Supersedes PG437)
GR-2, GR-4, GR-6TW and GR-14TW Grill Kits
For Adding Optional Grill to STAR Fixed Radiant Heaters
© 2010 Chromalox, Inc.
STAR-14 Fixed Heater
Before Grills are Added
See Page 2 – Fig. 1
STAR-14 Fixed Heater
After Grills have been Added
See Page 2 – Fig. 2
STAR-06 Fixed Heater
Before Grill is Added
See Page 3 – Fig. 1
STAR-06 Fixed Heater
After Grill has been Added
See Page 3 – Fig. 2
STAR-02 to 05
Fixed Heater
Before Grill is Added
STAR-02 to 05 Fixed Heater
After Grill has been Added
See Page 4

2
FRONT VIEW
13.5 KW FIXED STYLE HEATER
13.5 KW FIXED STYLE HEATER WITH GRILLE
SIDE VIEW
1
23
FRONT VIEW SIDE VIEW
DETAIL A
SCALE 1 : 2
PRONG OF GRILLE
THROUGH SLOT IN REFLECTOR
A
INSTRUCTIONS FORADDING AGRILLE TO AFIXED 13.5 KW RADIANT HEATER
1. The kit (168-053169-066) that adds a grille to a fixed 13.5 kW heater includes
the following parts:
(1) Grille (2 Req’d)
(2) 1/4-20 x 1/2” Long Bolt (4 Req’d)
(3) 1/4-20 Square Nut (4 Req’d)
2. Lay back of heater on floor.
3. Place grille prongs into slots of reflector using a counterclockwise rotation —
see Detail A. Insert 1/4-20 screws (2) through looped ends of grille with 1/4-20
square nut (3) on opposite side. Tighten screws securely in place with screw
driver.
4. Install remaining grille in same manner as step 3.
Figure 1
Figure 2

3
FRONT VIEW
1
23
6.0 KW FIXED STYLE HEATER WITH GRILLE
SIDE VIEW
SIDE VIEW
6.0 KW FIXED STYLE HEATER
FRONT VIEW
DETAIL A
PRONG OF GRILLE
THROUGH SLOT IN REFLECTOR
A
INSTRUCTIONS FORADDING AGRILLE TO AFIXED 6 KW RADIANT HEATER
1. The kit (168-053169-060) that adds a grille to a fixed 6 kW heater includes the
following parts:
(1) Grille
(2) 1/4-20 x 1/2” Long Bolt (2 Req’d)
(3) 1/4-20 Square Nut (2 Req’d)
2. Lay back of heater on floor.
3. Place grille prongs into slots of reflector using a counterclockwise rotation —
see Detail A. Insert 1/4-20 screws (2) through looped ends of grille with 1/4-20
square nut (3) on opposite side. Tighten screws securely in place with screw
driver.
Figure 1
Figure 2

2150 N. RULON WHITE BLVD., OGDEN, UT 84404
Phone: [phone] www.chromalox.com
RENEWAL PARTS IDENTIFICATION
Grill for STAR-02. . . . . . . . . . . . . . . . . . . . . . . . . . PCN 111878
Grill for STAR-05. . . . . . . . . . . . . . . . . . . . . . . . . . PCN 111894
Grill for STAR-06. . . . . . . . . . . . . . . . . . . . . . . 134-304892-001
Grill for STAR-14 (2). . . . . . . . . . . . . . . . . . . . 143-304892-003
Hardware for Mounting Grills GR-6KW and GR-14KW
Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248-075512-123
Square Nut . . . . . . . . . . . . . . . . . . . . . . . . . 200-048688-007
INSTALLATION OF GRILL IN STAR-02 AND -05 RADIANT HEATER
Snap grill prongs into lip of aluminum extrusion.
Limited Warranty:
Please refer to the Chromalox limited warranty applicable to this product at
http://www.chromalox.com/customer-service/policies/termsofsale.aspx.