TOOQ AZUL PACIFICO TQE-2527PB User manual

TQE-2527PB
User manual
2.5” STOREGE ENCLOSURE - SATA
USB 3.0 / 3.1 Gen 1
AZUL PACÍFICO

Content
EN
1 x Storage enclosure 1 x Connection
cable
2 x Screws 1 x Mini
screwdriver
1 x Usar
manual

System requirements, hard disk partition and le format
TooQ 2,5” storage enclosure is Plug & Play and allows you to connect your SATA disk (HDD or SSD) through a USB 3.0 / 3.1 Gen 1 port to any device
Windows, MacOS o Linux. Please refer to the product warranty here.
The system will not recognise the new hard drives until you create partitions and format them. This operation can be performed on systems based on:
Windows: Equipment (Right button) →Manage →Storage →Disk administrator.
Mac: Finder →Go →Utilities →Disk Utility.
Linux: System →System Administration →Disk Utility.
The PCB board of the enclosure is very sensitiva to
electrostatic discharges. Be sure to ralease static electricity before mounting the storage enclosure
In case of hard disk failure:
• Check that the disk partition and le formal partition have been performed.
• Check that the hard disk is in optimum condition. lf this is not the case, contact the manufacturer or distributor.
EN

Parts of the external enclosure
Connection cable Storage enclosure HDD/SSD
USB-A Micro USB LEO lndicator Micro USB port
EN

Installation and commissioning
1 2
Loasen the two screws to open the storage enclosure. Take o
the PCB board and connect it to the disk.
Caution: Do not touch the chipset on the PCB board or the guarantee will be void.
Carefully place the PCB board with the
disk installed inside the enclosure.
PCB board
Disk
EN

Installation and commissioning
3 4
Place the two screws to x the cover.
Connect the cable with the USB-A end to the device and the
Micro USB to the storage enclosure. The transfer speed will
be adapted to the version of the USB port on the device.
EN

Keep up with the latest news!
Follow us on social networks
©2021 by TooQ Technology, S.L.
AII Rights Reserved.
tooq.com
EN