Thermaltake WingMA User manual

2008 Thermaltake Technology Co.,Ltd. All Rights Reserved. www.thermaltake.com
C
All other registered trademarks belong to their respective companies. 2008.01
VI5000BNS
User's Manual

2008 Thermaltake Technology Co.,Ltd. All Rights Reserved. www.thermaltake.com
C
All other registered trademarks belong to their respective companies. 2008.01
VI5000BNS
User's Manual

ContentsContents Chapter1. Product IntroductionChapter1. Product Introduction
1.1 Specification
1
Chapter 1. Product Introduction
1.1 Specification
4.1 RSI Cooler(Optional)
4.2 RSI Power Supply (Optional)
Chapter 4 RSI Cooler and Power Supply
Chapter 2 Case Mechanical Operation
1
2
2
3
5
6
6
7
8
9
10
11
12
13
Chapter3 Motherboard & Leads Installation
4Expansion Slots
YesAir Guide
4.7 kg / 10.4 lbNet Weight
Micro ATX (9.6 x 9.6 )
VI5000BNS
Front (intake) :
120 x 120 x 25 mm fan (optional)
Rear (exhaust) :
120 x 120 x 25 mm TurboFan, 1300rpm,
17dBA
360.0 x 190.0 x 413.0 mm
(14.2 x 7.5 x 16.3 inch)
Black
Middle TowerCase Type
USB2.0 x 2, HD AudioFront I/O
Motherboard
Color
SECCMaterial
3
2
4
Drive Bays
-5.25 Drive Bay
-3.5 Drive Bay
-3.5 Drive Bay (Hidden)
Cooling System
Dimension
(H*W*D)
Model
4Expansion Slots
YesAir Guide
Net Weight
Micro ATX (9.6" x 9.6"
VI5000BNS
Front (intake) :
120 x 120 x 25 mm fan (optional)
Rear (exhaust) :
120 x 120 x 25 mm TurboFan, 1300rpm,
17dBA
360.0 x 190.0 x 413.0 mm
(14.2 x 7.5 x 16.3 inch)
Black
Middle TowerCase Type
Front I/O
Color
SECCMaterial
3
2
4
Drive Bays
-5.25" Drive Bay
-3.5" Drive Bay
-3.5" Drive Bay (Hidden)
Cooling System
Dimension
(H*W*D)
Model
2.1 How toopen the side panel
2.2 How toinstall PSU
2.3 5.25" deviceinstallation
2.4 3.5" deviceinstallation
2.5 HDD installation
2.6 Front fan installation(optional)
2.7 PCI slotusage
3.1 Motherboard Installation
3.2 Case LEDconnections
3.3 USB2.0 connection
3.4 Ear &MIC connections

ContentsContents Chapter1. Product IntroductionChapter1. Product Introduction
1.1 Specification
1
Chapter 1. Product Introduction
1.1 Specification
4.1 RSI Cooler(Optional)
4.2 RSI Power Supply (Optional)
Chapter 4 RSI Cooler and Power Supply
Chapter 2 Case Mechanical Operation
1
2
2
3
5
6
6
7
8
9
10
11
12
13
Chapter3 Motherboard & Leads Installation
4Expansion Slots
YesAir Guide
4.7 kg / 10.4 lbNet Weight
Micro ATX (9.6 x 9.6 )
VI5000BNS
Front (intake) :
120 x 120 x 25 mm fan (optional)
Rear (exhaust) :
120 x 120 x 25 mm TurboFan, 1300rpm,
17dBA
360.0 x 190.0 x 413.0 mm
(14.2 x 7.5 x 16.3 inch)
Black
Middle TowerCase Type
USB2.0 x 2, HD AudioFront I/O
Motherboard
Color
SECCMaterial
3
2
4
Drive Bays
-5.25 Drive Bay
-3.5 Drive Bay
-3.5 Drive Bay (Hidden)
Cooling System
Dimension
(H*W*D)
Model
4Expansion Slots
YesAir Guide
Net Weight
Micro ATX (9.6" x 9.6"
VI5000BNS
Front (intake) :
120 x 120 x 25 mm fan (optional)
Rear (exhaust) :
120 x 120 x 25 mm TurboFan, 1300rpm,
17dBA
360.0 x 190.0 x 413.0 mm
(14.2 x 7.5 x 16.3 inch)
Black
Middle TowerCase Type
Front I/O
Color
SECCMaterial
3
2
4
Drive Bays
-5.25" Drive Bay
-3.5" Drive Bay
-3.5" Drive Bay (Hidden)
Cooling System
Dimension
(H*W*D)
Model
2.1 How toopen the side panel
2.2 How toinstall PSU
2.3 5.25" deviceinstallation
2.4 3.5" deviceinstallation
2.5 HDD installation
2.6 Front fan installation(optional)
2.7 PCI slotusage
3.1 Motherboard Installation
3.2 Case LEDconnections
3.3 USB2.0 connection
3.4 Ear &MIC connections

3
2
11
11
22
2233
22
Chapter 2 Case Mechanical OperationChapter 2 Case Mechanical Operation
2.1 How to open the side panel
Toremove the side panel, please
remove upper andbottom thumb
screws on theback of the case.
2.2 How to install PSU
2.3 5.25" device installation
Secure it byscrews.
Remove the sidepanel, please refer to the orientation of the picture.
Place the PSUover the location as shown.
Finish installation.
Remove the frontpanel. Pull out thefront panel as shown.
Remove the 5.25"drive bay cover.
1133

3
2
11
11
22
2233
22
Chapter 2 Case Mechanical OperationChapter 2 Case Mechanical Operation
2.1 How to open the side panel
Toremove the side panel, please
remove upper andbottom thumb
screws on theback of the case.
2.2 How to install PSU
2.3 5.25" device installation
Secure it byscrews.
Remove the sidepanel, please refer to the orientation of the picture.
Place the PSUover the location as shown.
Finish installation.
Remove the frontpanel. Pull out thefront panel as shown.
Remove the 5.25"drive bay cover.
1133

5
4
Remove the 5.25"drive bay
metal cover.
Find the properopenings, then secure the device by screws.
Place 5.25" deviceinto the
drive bay.
5.25" device installation
complete.
2.4 3.5" device installation
Pull out thefront panel as
shown.
Remove the 3.5"drive bay plastic cover.
Remove the 3.5"drive bay
metal cover.
Find the properopenings,
then secure thedevice by screws.
3.5" device installation
complete.
Insert the 3.5"device into the
drive bay.
441122
3344
5566
55
66
77

5
4
Remove the 5.25"drive bay
metal cover.
Find the properopenings, then secure the device by screws.
Place 5.25" deviceinto the
drive bay.
5.25" device installation
complete.
2.4 3.5" device installation
Pull out thefront panel as
shown.
Remove the 3.5"drive bay plastic cover.
Remove the 3.5"drive bay
metal cover.
Find the properopenings,
then secure thedevice by screws.
3.5" device installation
complete.
Insert the 3.5"device into the
drive bay.
441122
3344
5566
55
66
77

2.5 HDD installation
2.6 Front fan installation(optional)
Place HDD intothe drive bay. Fasten the harddisk using screws.
Remove the frontpanel. Place the fanas shown.
Secure the fanby screws.
2.7 PCI slot usage
Remove screws from
PCI slot bracket.
Takeoff the PCIslot bracket.
Insert the PCIdevice into PCI slot. Put back thePCI slot bracket
and fasten thescrews.
Installation finished.
7
6
11
1122
3344
55
3344
22

2.5 HDD installation
2.6 Front fan installation(optional)
Place HDD intothe drive bay. Fasten the harddisk using screws.
Remove the frontpanel. Place the fanas shown.
Secure the fanby screws.
2.7 PCI slot usage
Remove screws from
PCI slot bracket.
Takeoff the PCIslot bracket.
Insert the PCIdevice into PCI slot. Put back thePCI slot bracket
and fasten thescrews.
Installation finished.
7
6
11
1122
3344
55
3344
22

Each motherboard hasdifferent standoff layout. It ishighly
suggested that yourefer to your motherboard's manual when
installing motherboard intothe Case. Thecases are applicablewith
Micro ATXmotherboards.
Your motherboard may require a special I/OPanel, which should be
included with yourmotherboard.
Placement Direction:
When installing themotherboard, make sure you follow the direction
provided by yourmotherboard manufacturer. On most standard
motherboards, the edgewith external ports goes to the rear part ofthe
chassis. It ishighly recommended thatyou install CPU, heat sink and
modular components beforefixing the motherboard inside the chassis.
3.1 Motherboard Installation
Chapter3 Motherboard & Leads InstallationChapter3 Motherboard & Leads Installation
3.2 Case LED connections
On the front of the case, you can find some LEDs and
switch leads (POWER SW*1, POWER LED*1, H.D.D.
LED*1, RESET SW*1).
Please consult user manual of your motherboard
manufacturer, then connect these leads to the panel
header on the motherboard. These leads are usually
labeled; if not, please trace them back to the case
front to find out their source.
- POWER LED
connects to your M/B at the PLED
- POWER SW
connects to the PWR connector on the motherboard.
- H.D.D LED
connects to the 2-pin labeled HDD LED connector.
- RESET SW
connects to the RSW connector on the motherboard,
9
8
The locations of the
screw holes. Note
these locations and
place included
standoffs on the
chassis first.
This side towards
the rear of the
chassis
Above illustration is a sample of what
the motherboard's layout. For more
detail screw hole placement, please
refer to your motherboard manual.

Each motherboard hasdifferent standoff layout. It is highly
suggested that yourefer to your motherboard's manual when
installing motherboard intothe Case. Thecases are applicablewith
Micro ATXmotherboards.
Your motherboard may require a special I/OPanel, which should be
included with yourmotherboard.
Placement Direction:
When installing themotherboard, make sure you follow the direction
provided by yourmotherboard manufacturer. On most standard
motherboards, the edgewith external ports goes to the rear part ofthe
chassis. It is highly recommended thatyou install CPU,heat sink and
modular components beforefixing the motherboard inside the chassis.
3.1 Motherboard Installation
Chapter3 Motherboard & Leads InstallationChapter3 Motherboard & Leads Installation
3.2 Case LED connections
On the front of the case, you can find some LEDs and
switch leads (POWER SW*1, POWER LED*1, H.D.D.
LED*1, RESET SW*1).
Please consult user manual of your motherboard
manufacturer, then connect these leads to the panel
header on the motherboard. These leads are usually
labeled; if not, please trace them back to the case
front to find out their source.
- POWER LED
connects to your M/B at the PLED
- POWER SW
connects to the PWR connector on the motherboard.
- H.D.D LED
connects to the 2-pin labeled HDD LED connector.
- RESET SW
connects to the RSW connector on the motherboard,
9
8
The locations of the
screw holes. Note
these locations and
place included
standoffs on the
chassis first.
This side towards
the rear of the
chassis
Above illustration is a sample of what
the motherboard's layout. For more
detail screw hole placement, please
refer to your motherboard manual.

11
10
USB connection
Please consult your motherboard manual to find
out the section of "USB connection".
3.3 USB2.0 connection 3.4 Ear & MIC connections
USB
1
3
5
7
9
2
4
6
8
10
VCC1
D1-
D1+
GND
NC
VCC2
D2-
D2+
GND
KEY
HD AUDIO
AC'97
- Please refer to the following illustration of Audio connector and your
motherboard user manual.
- Please select the motherboard which used AC'97 or HD Audio (Azalia),
(be aware of that your audio supports AC'97 or HD Audio (Azalia))
or it will damage your device(s).
- On some motherboards, the connectors for Audio are not the same as
the drawing below. Please check with your motherboard manual
before installing.

11
10
USB connection
Please consult your motherboard manual to find
out the section of "USB connection".
3.3 USB2.0 connection 3.4 Ear & MIC connections
USB
1
3
5
7
9
2
4
6
8
10
VCC1
D1-
D1+
GND
NC
VCC2
D2-
D2+
GND
KEY
HD AUDIO
AC'97
- Please refer to the following illustration of Audio connector and your
motherboard user manual.
- Please select the motherboard which used AC'97 or HD Audio (Azalia),
(be aware of that your audio supports AC'97 or HD Audio (Azalia))
or it will damage your device(s).
- On some motherboards, the connectors for Audio are not the same as
the drawing below. Please check with your motherboard manual
before installing.

13
12
4.1 RSI Cooler (Optional)
Chapter4 RSI Cooler and Power SupplyChapter4 RSI Cooler and Power Supply
There are recommended products of Thermaltake PSU,
please refer to http://www.thermaltake.com
4.2 RSI Power Supply (Optional)
FEATURES :
- Perfect ratio aluminum extrusion heatsink
for better heat dissipation.
- Tool-less clip, easy installation.
- Silent Solution
FEATURES:
- Aluminum Crotch Fin provides more
heat dissipation area.
- Silent operation.
Optimized solution for low power
processors.
- Back plate & Spring Screw mounting
method ensure safe installation when
shipping.
P/N : CL-P0441
Designed for Intel Core 2 Duo Processor
Application for Intel Core 2 Duo /
Pentium D / Celeron series (Socket LGA775)
P/N : CL-P0444
Application for
AMD Athlon 64 X2/Athlon 64 FX/
Athlon 64(Socket AM2/ 939/754) and
Sempron (Socket AM2/754)
FEATURES:
- Intel ATX 12V 2.0 Compatible.
- Supports 6-pin PCI-Express, 2 SATA, and 20+4 pin connector.
- Dual +12V output circuit provides steady output for system.
- Super quiet and stable 12cm ball bearing fan.
- Build-in Over Current Protection, Over Voltage protection, and
Short-Circuit protection.
- Safety : UL, CUL, CE, NEMKO, TUV+CB, BSMI, FCC certification.
Litepower
400W
P/N: W0161 W/PFC P/N: W0162 No PFC
ATX
12V 2.0
X1
PCI
Express
X2
S-ATA
AMD/
Intel
Dual Core
Support
PFC
Universal
24(20)
Pin

13
12
4.1 RSI Cooler (Optional)
Chapter4 RSI Cooler and Power SupplyChapter4 RSI Cooler and Power Supply
There are recommended products of Thermaltake PSU,
please refer to http://www.thermaltake.com
4.2 RSI Power Supply (Optional)
FEATURES :
- Perfect ratio aluminum extrusion heatsink
for better heat dissipation.
- Tool-less clip, easy installation.
- Silent Solution
FEATURES:
- Aluminum Crotch Fin provides more
heat dissipation area.
- Silent operation.
Optimized solution for low power
processors.
- Back plate & Spring Screw mounting
method ensure safe installation when
shipping.
P/N : CL-P0441
Designed for Intel Core 2 Duo Processor
Application for Intel Core 2 Duo /
Pentium D / Celeron series (Socket LGA775)
P/N : CL-P0444
Application for
AMD Athlon 64 X2/Athlon 64 FX/
Athlon 64(Socket AM2/ 939/754) and
Sempron (Socket AM2/754)
FEATURES:
- Intel ATX 12V 2.0 Compatible.
- Supports 6-pin PCI-Express, 2 SATA, and 20+4 pin connector.
- Dual +12V output circuit provides steady output for system.
- Super quiet and stable 12cm ball bearing fan.
- Build-in Over Current Protection, Over Voltage protection, and
Short-Circuit protection.
- Safety : UL, CUL, CE, NEMKO, TUV+CB, BSMI, FCC certification.
Litepower
400W
P/N: W0161 W/PFC P/N: W0162 No PFC
ATX
12V 2.0
X1
PCI
Express
X2
S-ATA
AMD/
Intel
Dual Core
Support
PFC
Universal
24(20)
Pin