Chromcraft Revington N2150-10-T User manual

STEP 3
STEP 2
HARDWARE LIST :
STEP 1
MADE IN MALAYSIA
PAGE 1 OF 3
ASSEMBLY :
TBSR-12417BC-CNGN
Allen Key
1 pc
(Small)
Flat Washer
8 pcs
JCBC Bolt
8 pcs
Wrench
1 pc
(Large)
Flat Washer
12 pcs
(Small)
Lock Washer
8 pcs
Hex Nut
12 pcs
(Large)
Lock Washer
12 pcs
Position the table top upside down on a smooth, protective
surface such as carpet. Remove and discard the
temporary wood strip. Install the side panel and secure
with Flat Washer, Lock Washer and Bolt. Attach
mounting plate as shown. Secure with Flat Washer,
Lock Washer and bolt, then tighten all the bolts
with Allen Key provided.
Turn the pedestal upside down. Attach legs by inserting
hanger bolts through pre-drilled holes on pedestal, insert
Flat Washer, Lock Washer and Nut onto the Hanger Bolt
then tighten with the Wrench provided.
Turn the base right side up. Insert and tighten the Thread Head Bolt
as shown in the below Figure 2.
Thread Head Bolt
(Fig 2)
Lock Washer (Large)
Flat Washer (Large)
Wrench
Hex Nut
Pedestal
Leg
Level Glide
Mounting Plate
Side Panel
REMOVE WOOD STRIP
Flat Washer (Small)
Lock Washer (Small)
JCBC Bolt
Allen Key
Allen Key
JCBC Bolt
Flat Washer (Small)
Lock Washer (Small)
SOLID EXTENSION BUTTERFLY TOP PEDESTAL TABLE
Thread Head
4 pcs
Bolt
N2150-10/20/04-T, N2150-10/20/04-B

STEP 4
Lift both leaves from the compartment and flip up the apron then unfold Table Leaf and place the leaf on the top
surface carefully.
Unlock the hooks underneath the table and pull the table top wide open equally from bolt ends. Align and attach the
table top to the pedestal. Insert a Flat Washer, Lock Washer and Nut onto the Thread Head Bolt. Tighten all
Nuts with the Wrench provided.
STEP 5
MADE IN MALAYSIA
PAGE 2 OF 3
TBSR-12417BC-CNGN
Lock Washer (Large)
Flat Washer (Large)
Wrench
Hex Nut
Unlock Hook
Flip up Apron
N2150-10/20/04-T, N2150-10/20/04-B
SOLID EXTENSION BUTTERFLY TOP PEDESTAL TABLE

TO STORE THE CENTRE LEAF WHEN NOT IN USE
STEP 6
Push Table Top from both ends to close gap and lock the hooks underneath table. Adjust the level glides until the
table sits firmly.
Unlock the hooks underneath the table and pull the table top wide open equally from both ends. Flip down the apron
and fold the centre leaf to store within the compartment. Push table top from both ends to close. Lock the hooks
underneath the table.
MADE IN MALAYSIA
PAGE 3 OF 3
TBSR-12417BC-CNGN
Lock Hook Level Glide
Unlock Hook Lock Hook
Flip down Apron
N2150-10/20/04-T, N2150-10/20/04-B
SOLID EXTENSION BUTTERFLY TOP PEDESTAL TABLE