Chrysler 300C Sedan User manual

Chrysler 300C Sedan
TECHNICAL SPECIFICATIONS
Body and chassis
Five-seater, four-door sedan, all-steel unitary body chassis. Choice of three
longitudinally mounted front engines driving the rear wheels via a four-speed
automatic or five-speed automatic transmission and a sub-frame mounted
rear differential.
Long/Wide/Height (mm) 5015/1880/1475
Axle distance (mm) 3050
Front/Rear Wheel distance (mm) 1600/1605
Minimum turning diameter (m) 11.9
Minimum height to ground (mm) 160
General Vehicle Weight (Kg) 1740/1775/1885
Tank capacity (L) 68/68/72
Engines
5.7L HEMI®
Type Petrol, eight-cylinder, V-type, 90-degree;
with hemispherical combustion
chambers within aluminum cylinder
heads and Multi-Displacement System
(MDS)
Capacity 5.7L (5654 cc/345.0 cu. in.)
Maximum power 252 kW (342 hp DIN) @ 5000 rpm
Maximum torque 545 N•m @ 4000 rpm
Compression ratio 9.6:1
Bore and stroke 99.5 x 90.9 mm (3.92 x 3.58 in.)

3.5L High Output
Type Petrol, six-cylinder, V-type, 60-degree
Capacity 3.5L (3518 cc/214.7 cu. in.)
Maximum power 188 kW (255 hp DIN) @ 6800 rpm
Maximum torque 340 N•m @ 3800 rpm
Compression ratio 10.0:1
Bore and stroke 96.0 x 81.0 mm (3.78 x 3.19 in.)
2.7L
Type Petrol, six-cylinder, V-type, 60-degree
Capacity 2.7L (2736 cc/167.0 cu. in.)
Maximum power 152 kW (206 hp DIN) @ 6400 rpm
Maximum torque 258 N•m @ 4000 rpm
Compression ratio 9.9:1
Bore and stroke 86.0 x 78.5 mm (3.38 x 3.09 in.)
Transmissions
4-speed automatic
Availability Standard with 2.7L engines
Type Four-speed electronically controlled
Adaptive automatic with fuel-saving
torque converter lock-up
5-speed automatic
Availability Standard with 3.5L and 5.7L HEMI
engine
Type Five-speed electronically controlled
adaptive automatic with choice of fully
automatic or AutoStick driver operated
manual

Driveline Rear-wheel drive Two-piece driveshaft
with subframe-mounted rear differential;
half-shaft to each rear wheel fitted with
two CV universal joints
Chassis and running gear
Front suspension Double wishbones, coil springs and
gas-filled shock absorbers
Rear suspension Independent five-link, coil springs and
gas-filled shock absorbers
Steering Hydraulic power-assisted
rack-and-pinion
Brakes Ventilated discs front and rear with ABS
and Brake Assist
Wheels and tires 18 x 7.5" with P225/60R18 W tires
# # #
Additional information and news on the Jeep brand and its vehicles is available on the
Internet at: http://cgmedia.daimlerchrysler.com
DaimlerChrysler Communications, Stuttgart (Germany), Auburn Hills (USA)