Cincoze CO-100 Series User manual

Open Frame Panel
TFT-LCD Open Frame Display Module
Version: V1.00
Convertible Display Module
CO-100 Series
User Manual

CO-100 Series | User Manual 2
Contents
Preface ..................................................................................................................................3
Copyright Notice ....................................................................................................................3
Acknowledgement .................................................................................................................3
Disclaimer..............................................................................................................................3
Declaration of Conformity ......................................................................................................4
Product Warranty Statement..................................................................................................4
Technical Support and Assistance .........................................................................................6
Conventions Used in this Manual ..........................................................................................6
Safety Precautions.................................................................................................................7
Package Contents .................................................................................................................8
Ordering Information..............................................................................................................8
Chapter 1 Product Introductions ............................................................................................9
1.1 Overview ................................................................................................................10
1.2 Highlights................................................................................................................10
1.3 Key Features ..........................................................................................................10
1.4 Hardware Specification...........................................................................................12
1.4.1 CO-W121C-R10 .......................................................................................................12
Chapter 2 System Setup......................................................................................................14
2.1 Connecting to PC or Monitor Module......................................................................15
2.2 Standard Mount ......................................................................................................17
2.3 Flat Mount...............................................................................................................19

CO-100 Series | User Manual 3
Preface
Revision
Revision
Description
Date
1.00
First Released
2022/09/05
Copyright Notice
© 2022 by Cincoze Co., Ltd. All rights are reserved. No parts of this manual may be copied,
modified, or reproduced in any form or by any means for commercial use without the prior
written permission of Cincoze Co., Ltd. All information and specification provided in this
manual are for reference only and remain subject to change without prior notice.
Acknowledgement
Cincoze is a registered trademark of Cincoze Co., Ltd. All registered trademarks and product
names mentioned herein are used for identification purposes only and may be trademarks
and/or registered trademarks of their respective owners.
Disclaimer
This manual is intended to be used as a practical and informative guide only and is subject
to change without notice. It does not represent a commitment on the part of Cincoze. This
product might include unintentional technical or typographical errors. Changes are
periodically made to the information herein to correct such errors, and these changes are
incorporated into new editions of the publication.

CO-100 Series | User Manual 4
Declaration of Conformity
FCC
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
CE
The product(s) described in this manual complies with all application European
Union (CE) directives if it has a CE marking. For computer systems to remain
CE compliant, only CE-compliant parts may be used. Maintaining CE
compliance also requires proper cable and cabling techniques.
Product Warranty Statement
Warranty
Cincoze products are warranted by Cincoze Co., Ltd. to be free from defect in materials and
workmanship for 2 years (2 Years for PC Module, 1 Year for Display Module) from the date
of purchase by the original purchaser. During the warranty period, we shall, at our option,
either repair or replace any product that proves to be defective under normal operation.
Defects, malfunctions, or failures of the warranted product caused by damage resulting from
natural disasters (such as by lightening, flood, earthquake, etc.), environmental and
atmospheric disturbances, other external forces such as power line disturbances, plugging
the board in under power, or incorrect cabling, and damage caused by misuse, abuse, and
unauthorized alteration or repair, and the product in question is either software, or an
expendable item (such as a fuse, battery, etc.), are not warranted.
RMA
Before sending your product in, you will need to fill in Cincoze RMA Request Form and
obtain an RMA number from us. Our staff is available at any time to provide you with the
most friendly and immediate service.

CO-100 Series | User Manual 5
◼RMA Instruction
⚫Customers must fill in Cincoze Return Merchandise Authorization (RMA)
Request Form and obtain an RMA number prior to returning a defective
product to Cincoze for service.
⚫Customers must collect all the information about the problems encountered
and note anything abnormal and describe the problems on the “Cincoze
Service Form” for the RMA number apply process.
⚫Charges may be incurred for certain repairs. Cincoze will charge for repairs to
products whose warranty period has expired. Cincoze will also charge for
repairs to products if the damage resulted from acts of God, environmental or
atmospheric disturbances, or other external forces through misuse, abuse, or
unauthorized alteration or repair. If charges will be incurred for a repair,
Cincoze lists all charges, and will wait for customer’s approval before
performing the repair.
⚫Customers agree to ensure the product or assume the risk of loss or damage
during transit, to prepay shipping charges, and to use the original shipping
container or equivalent.
⚫Customers can be sent back the faulty products with or without accessories
(manuals, cable, etc.) and any components from the system. If the
components were suspected as part of the problems, please note clearly
which components are included. Otherwise, Cincoze is not responsible for the
devices/parts.
⚫Repaired items will be shipped along with a "Repair Report" detailing the
findings and actions taken.
Limitation of Liability
Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use,
whether based on warranty, contract, negligence, product liability, or otherwise, shall not
exceed the original selling price of the product. The remedies provided herein are the
customer’s sole and exclusive remedies. In no event shall Cincoze be liable for direct,
indirect, special or consequential damages whether based on contract of any other legal
theory.

CO-100 Series | User Manual 6
Technical Support and Assistance
1. Visit the Cincoze website at www.cincoze.com where you can find the latest information
about the product.
2. Contact your distributor or our technical support team or sales representative for
technical support if you need additional assistance. Please have following information
ready before you call:
⚫Product name and serial number
⚫Description of your peripheral attachments
⚫Description of your software (operating system, version, application software, etc.)
⚫A complete description of the problem
⚫The exact wording of any error messages
Conventions Used in this Manual

CO-100 Series | User Manual 7
Safety Precautions
Before installing and using this device, please note the following precautions.
1. Read these safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Disconnected this equipment from any AC outlet before cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equipment and
must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall
may cause damage.
7. Make sure the voltage of the power source is correct before connecting the equipment
to the power outlet.
8. Use a power cord that has been approved for using with the product and that it matches
the voltage and current marked on the product’s electrical range label. The voltage and
current rating of the cord must be greater than the voltage and current rating marked on
the product.
9. Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be opened only
by qualified service personnel.
If one of the following situations arises, get the equipment checked by service
personnel:
⚫The power cord or plug is damaged.
⚫Liquid has penetrated into the equipment.
⚫The equipment has been exposed to moisture.
⚫The equipment does not work well, or you cannot get it work according to the user's
manual.
⚫The equipment has been dropped and damaged.
⚫The equipment has obvious signs of breakage.
14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer.
15. Equipment intended only for use in a RESTRICTED ACCESS AREA.

CO-100 Series | User Manual 8
Package Contents
Before installation, please ensure all the items listed in the following table are included in the
package.
CO-W121C-R10
Item
Description
Q’ty
1
CO-W121C Display Module
1
Note: Notify your sales representative if any of the above items are missing or damaged.
Ordering Information
Display Module with Projected Capacitive Touch
Model No.
Product Description
CO-W121C-R10
21.5" TFT-LCD Full HD 16:9 Open Frame Display
Module with Projected Capacitive Touch

CO-100 Series | User Manual 9
Chapter 1
Product
Introductions

CO-100 Series | User Manual 10
Patent Pending
1.1 Overview
Cincoze open frame display modules (CO-W121C) use our patented CDS (Convertible
Display System) technology to connect with a computer module (P2000 or P1000 series) to
form an industrial panel PC or connect with a monitor module (M1100 series) to form an
industrial touch monitor. Designed for equipment manufacturers, easy installation is the main
advantage of the CO-W121C. The integrated structure, exclusive adjustable mounting
bracket, and support for various mounting methods enable a perfect fit in cabinets of di-
fferent materials and thicknesses. The robust design also meets the application needs of
harsh industrial environments.
1.2 Highlights
Flexible Design and Easy Installation
The CO-100 series includes the exclusive adjustable
mounting bracket with thickness adjustment setting,
as well as panel and boss type locking. Flat and
standard mount options make integration in
industrial machinery easy and convenient.
Integrated Structure
The CO-100 series is flexible and reliable. As standard,
the open frame display module can be deployed in
equipment machines, but remove the mounting bracket
and it becomes a standalone display module for use
with a VESA mount or in a 19” rack.

CO-100 Series | User Manual 11
0 – 70°C
IP65
Strong, Reliable and Durable
The CO-100 series integrated structure design
enables wide temperature support (0–70°C) in
addition to front IP65 dustproof and waterproof
protection, meeting HMI application requirements.
Highly Adaptable CDS Design
Through the patented CDS technology, theCO-100 can
be combined with a computer module to become an
industrial panel PC, or with a monitor module to
become an industrial touch monitor. Easy maintenance
and upgrade flexibility are its main advantages.
1.3 Key Features
⚫21.5" TFT-LCD with Projected Capacitive Touch
⚫Cincoze Patent CDS Technology Support
⚫Designed with Adjustable Mounting Bracket
⚫Support Flat / Standard / VESA / Rack Mount
⚫Front Panel IP65 Compliant
⚫Wide Operating Temperature
Patent No. M482908

CO-100 Series | User Manual 12
1.4 Hardware Specification
1.4.1 CO-W121C-R10
Display
LCD Size
•21.5” (16:9)
Resolution
•1920 x 1080
Brightness
•300 cd/m2
Contract Ratio
•5000:1
LCD Color
•16.7M
Pixel Pitch
•0.24825(H) x 0.24825(V) mm
Viewing Angle
•178 (H) / 178 (V)
Backlight MTBF
•50,000 hrs
Touchscreen
Touchscreen Type
•Projected Capacitive Touch
Physical
Dimension (WxDxH)
•550 x 343.7 x 63.3
Weight
•7.16KG
Construction
•One-piece and Slim Bezel Design
Mounting Type
•Flat / Standard / VESA / Rack Mount
Mounting Bracket
•Pre-installed Mounting Bracket with Adjustable Design
( Support 11 different stages of adjustment)
Protection
Ingress Protection
•Front Panel IP65 Compliant
* According to IEC60529
Environment
Operating Temperature
•0°C to 70°C
Storage Temperature
•-20°C to 70°C

CO-100 Series | User Manual 13
Humidity
•80% RH @ 40°C (non-condensing)
EMC
•CE, UKCA, FCC, ICES-003 Class A
Safety
•UL, cUL 62368-1 (Pending)
External Layout
Dimension
Unit: mm

CO-100 Series | User Manual 14
Chapter 2
System Setup

CO-100 Series | User Manual 15
2.1 Connecting to PC or Monitor Module
1. Locate the male connector on the display module and the female connector on the PC or
monitor module. (Please assemble the wall mount brackets and remove the CDS cover
plate on the PC or monitor module first according to its user manual.)
2. Connect the modules.
PC module
Monitor module

CO-100 Series | User Manual 16
3. Fasten the 6 screws to fix the PC module or monitor module on the display module.

CO-100 Series | User Manual 17
2.2 Standard Mount
Before doing the following steps, please make sure the screw positions are fastened at the
default positions as indicated in the following picture. The default positions are the correct
positions for Standard Mount, so it does not need to change the screw positions additionally
for Standard Mount.
1. Put the CO-100 module onto the rack’s back side.

CO-100 Series | User Manual 18
2. Fasten the screws from the rack’s front side. Please prepare 12 x M4 screws for fixing
the module through the screw holes as shown below.
User can also prepare 16 x M4 screws for fixing the module through the oblong holes as
shown below.
The round screw holes have threads, while the oblong holes do
not have threads. Please select the screw-fixing hole position
according to the on-site environment.
NOTE

CO-100 Series | User Manual 19
2.3 Flat Mount
1. Locate the left and right-side mounting brackets.
2. Remove the two screws on the left and right-side mounting brackets.
3. Loosen the three screws on the left and right-side mounting brackets.
4. Measure the rack thickness. The thickness is measured 3mm in this example.

CO-100 Series | User Manual 20
5. According to the thickness = 3mm for the example, push down the left and right-side
mounting brackets to the place at screw hole = 3mm.
6. Fasten the two screws on the left and right-side mounting brackets.
7. Fasten the three screws on the left and right-side mounting brackets.
3mm