Cinevate Atlas 200 User manual

Atlas 200
QUICKST RT

Contents
1” Solid Steel Chrome Plated Rails
Atlas 200 Body
150mm Bowl or
100mm Bowl
2x
2x
2x Pairs of Height Adjustable Legs
w/ Kip Handles and Rubber Feet
Rails Blocks

Height Adjustable Legs with
Rubber Feet
Kip Handles
Tripod
Adapter
Plate
Brake
Rails Block
with 5/8”
Receiver
1” Steel Rods
Linear
Bearings 100mm or
150mm Bowl
(shown with Ball
installed)

1
2
Basic Assembly

Tighten Kips
Lift kip handle
to disengage.
Release
to re-engage.
1
2

Ensure brake is unlocked when sliding the body onto the rails.

Ensure brake is unlocked when sliding the body onto the rails.
Basic assembly complete.

Standard Locked Leg Position
Flush
Locked
Position
Micro-adjustment
of Rubber Feet
for levelling

Height Adjustable Leg Position
Gap
Adjustable
Position

Mounting Options
tripod adapter plate
flip blocks over to use 5/8” receiver
(i.e. lighting /c-stand or 5/8” grip rod)
flipped block for
5/8” receiver use

Troubleshooting: If ATLAS is binding
loosen kips on one side
re-tighten kips
Repeat on other end if necessary.
slide ATLAS

For setup and operation tutorials of other Cinevate products
visit: cinevate.com/support
Call: 1-807-344-7153
Follow us on:
twitter.com/cinevateinc
facebook.com/showtheworld
CINEVATE.COM