Cirrus BladeM User manual
Cirrus HQ
200 West Rd.
Portsmouth, NH 03801
877 636 2331
cirrusled.com
This document is confidential and proprietary to Cirrus Systems for distribution to direct customers and their installers only.
© Copyright 2021, Cirrus Systems, Inc., All Rights Reserved.
Installation Manual
The revolutionary and ultra-high resolution BladeM
REV04122021
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
Table of Contents
A. Introduction
. Equipment description
. Safety/compliance information
. Environmental considerations
. Shipping/receiving, product storage
. Warranty terms for all displays
B. Frames and Assembly
Frame assembly
Frame mounting
Ventilation
C. Electrical Section
Power cable
Power injectors 1
D. Controller
M Pro Controller details
Mounting the M Pro Controller
Extension cables
Connecting the all-in-one antenna
Mounting the all in-one-antenna
M Pro indicator codes
Automapping procedure
E. Panels
Connecting panels
Cable connections
Wiring pattern
F. Network Connections
Important network information (Ethernet or WiFi kit only)
WiFi kit installation
Connecting the WiFi kit
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
1. Equipment description
1’x2’ Cirrus frame
BladeM LED Displays are modular signs consisting of these components:
Frame bolts, ¼”-20x0.5”
1’x2’ Legacy frame
A. Introduction
Frames
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
Panel cable
Rear view
BladeM 9mm LED sign module
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
To manage single and dual-sided signs.
Controller box
10’ Extension cable (x2) Power cable
M1 Pro Controller M1 Pro Controller mounting bracket
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
All-in-one antenna
TP-Link wireless kit
All-in-one antenna
Optional wireless access kit
10’ Ethernet cable (x2)
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
(optional, may not be included)
Power injector
Power injector Power cable
Panel cable
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
2. Safety/compliance information
High voltage
Contact with high voltage from AC mains may cause death or serious injury. Always
disconnect AC power to unit prior to servicing.
Cirrus LED components are UL Listed. File #E352796 and FCC Certified.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
Changes or modifications to this device that are not expressly
approved by Cirrus Systems, Inc. could void user’s authority to
operate this device.
Grounding
It is essential to earth-ground the sign before connecting controller. Connecting
signs that are not earth grounded may cause damage to the LED Display System
and in severe cases cause death or injury.
Other
Other safety messages appear throughout this manual where appropriate.
BLADE M LED DISPLAY SYSTEM
INSTALLATION MANUAL
cirrusled.com
Cirrus Systems Inc. | 200 West Rd, Portsmouth, NH 03801 • Phone: 1.877.636.2331 | contact@cirrusled.com
THIS DOCUMENT IS CONFIDENTIAL & PROPRIETARY TO CIRRUS SYSTEMS FOR DISTRIBUTION TO DIRECT CUSTOMERS AND THEIR INSTALLERS ONLY.
8
FCC Information
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Changes or modifications to this device that are not expressly approved by Cirrus Systems,
Inc. could void user’s authority to operate this device.
FCC information
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
3. Environmental considerations
4. Shipping & Receiving, product storage
The BladeM LED panels are fully encapsulated and water-proof. The M1 Pro Controller is housed in
a water-proofed aluminum enclosure.
The BladeM LED panels are rated for an ambient operating temperature range of -40~+70° Celsius (-40
~ +158° Fahrenheit) and are designed to withstand continuous direct sunlight. If the panels experience
an over-temperature condition, a signal will be sent to the controller to shut down the sign. Once the
sign has cooled, it will automatically re-start.
The M1 Pro Controller is rated for an ambient operating temperature range of -10~+60°C (14~ +140°F)
and should be protected from direct sunlight. Operation at colder temperatures is routinely and
regularly accomplished, though starting the screen from a powered o state at temperatures below
14°F may not be possible. A controller which is in a powered on state produces ambient heat which
can allow it to continuously run at temperatures as low as -30°F (-34°C).
All components and connections are sealed and water-tight for protection from the ingress of dust and
water, though no components should be subjected to immersion in water.
All deliveries shall be FOB Cirrus Systems (Seller), Portsmouth, NH. Methods and routes of
shipment, unless Seller specifies in writing otherwise, shall be accepted as chosen by Seller at
Seller’s sole discretion. Purchaser shall pay all costs of shipment. Delivery to the carrier shall
constitute delivery and passage of title to Purchaser, and risk of loss shall pass to Purchaser
concurrently with passage of title. Seller will use reasonable diligence to meet scheduled shipment
dates and times. Such dates and times are the best possible estimates, and not guarantees, of
when goods will be shipped. In no event shall Seller be liable for any losses or damages of any kind
due to delays in shipment, nor may Purchaser cancel its contract because of any such delay.
It is the responsibility of the Purchaser to check the Product for visible damage prior to accepting delivery
from the carrier. Any damage to the Product must be noted on the delivery slip with the carrier and
immediately reported to Cirrus. Photographic evidence of damages will be required. Cirrus may assist in
seeking remedy with the carrier for damaged goods but does not retain title and therefore is not legally
responsible for said damages.
Delivered product should be stored in a cool dry place, out of the way of foot/motorized trac.
It is the installer’s responsibility to look over the product before installing to ensure there are no
missing parts and there is no visible damage to any parts of the display. If there is any damage,
Cirrus must be informed prior to install.
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
5. Warranty terms for all displays
What this warranty covers
This warranty covers any defects, failures, or malfunctions of any Cirrus LED display system
hardware. All inspections of warrantied components will be conducted within 72 hours and results
will be presented immediately thereafter and applicable charges will be sustained or reimbursed at
that time.
9mm pixel warranty (per panel) - 1st year, 100% pixel guarantee, 2 pixels for years 2-3 and then 3
pixels for years 4-5.
6mm pixel warranty (per panel) - 1st year, 100% pixel guarantee, 4 pixels for years 2-3 and then 6
pixels for years 4-5.
Coverage period
This warranty lasts for five calendar years following the purchase of any Cirrus LED display system.
Warranty may not be exercised until the display has been installed, powered, connected to the
Internet and Cirrus has verified adequate setup. Displays that are stored for extended periods of
time and not installed within 90 days of shipment may not qualify for warranty coverage at the
discretion of Cirrus Systems Inc. Coverage terminates if an end user sells, transfers, opens or
tampers with any display system or its internal components.
What’s covered
Cirrus will replace any defective or malfunctioning part at no charge and pay for shipping. All
defective parts must be returned to Cirrus Systems for servicing upon failure. Replacement
components will be dispatched once a credit card has been secured to guarantee the return of the
defective part. Replaced parts are required to be returned within 45 days of shipment or a charge
for the cost of the replacement part will be applied to the held credit card.
What’s not covered
This warranty does not cover labor costs or any problem that is caused by abuse, misuse,
improper installation, or an act of God. Also, consequential and incidental damages are not
recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply to you. Cirrus will not
be responsible for any labor charges incurred during assembly, disassembly, or any other services
related to the part replacement.
Service eligibility
Any company or individual that purchases a display from Cirrus Systems or from an authorized
Cirrus distributor is eligible for this warranty and service. If issues are experienced with any display
system, contact Cirrus at (877) 636-2331 and follow the prompts for technical support.
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
Exclusions: The following issues are not covered under the limited warranties set
forth above. For these issues, Cirrus shall not be obligated to furnish warranty
support or maintenance services, nor shall Cirrus be liable hereunder for repairs,
replacement or additions:
. Damage or problems caused during transportation by Customer;
. Defects or damage that result from use of the Products or Software in other than their normal
and customary manner;
. Damage or problems caused by repairs, changes, modifications, maintenance, relocation or re-
installation by other than Cirrus designated technicians, or without Cirrus’s written permission;
. Products and Software subject to unauthorized modification, disassembly or repair (including
the addition to the Product of non-Cirrus authorized and supplied equipment) which adversely
aect Product or Software performance or interfere with Cirrus’s normal warranty inspection
and Product or Software testing for warranty verification;
. Products which, due to illegal or unauthorized alteration of Product software or firmware, do
not function in accordance with Cirrus’s published specifications;
. Damage or problems caused by not following Electro-Static Discharge (“ESD”) precautions
when handling Covered Products;
. Damage or problems caused by improper electrical grounding;
. Damage or problems caused by improper utility service;
. Damage or problems caused by use of non-Cirrus supplied equipment or parts;
. Damage or problems caused by misuse, abuse, neglect or accident;
. Damage or problems caused by an external electrical fault or any unusual shock;
. Damage or problems caused by an accident, fire or water;
. Damage or problems caused by natural disasters such as flood, fire, lightning, earthquake or
tornado.
. Damage or problems caused by failure to maintain the proper operating or storage
environment for the Covered Products to include but not limited to air conditioning, humidity
control, or corrosive atmosphere harmful to electronic equipment as provided in the Cirrus
Installation Manual;
. Damage or problems caused by strikes, riots, sabotage, or acts of war;
. Theft;
. Routine cleaning, or normal and customary wear and tear;
. Scratches or other cosmetic damage to Product surfaces that do not aect the operation of the
Product;
. Technical support or maintenance of any kind for third-party application or custom software not
defined under Covered Products;
. Technical support associated with programming of Application Program Interfaces (API) of
Covered Products except for support on the capabilities of the programming interface;
. Consumables and supplies (i.e., expendable batteries, recording media, tapes, disks or other
consumables);
. Freight costs to the repair depot;
. Non-Cirrus manufactured equipment, which carries its original manufacturer’s warranty and
which will be provided to Customer upon request.
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
The 5 year product warranty will go into eect upon the date of shipment and transfer of title. Warranty
may not be exercised until the display has been installed, powered, connected to the Internet and Cirrus
has been called to verify the installation. Displays which are stored for extended periods of time and not
installed within 90 days of shipment may not qualify for warranty coverage at the discretion of Cirrus
Systems Inc.
Cirrus will cover the first year of warranty of the TP-Link WiFi kit and its power supply. After the first year of
use, client must work through the warranty with TP-Link directly.
Except as expressly set forth in this Agreement, the Products and Software, including the Hardware, and
all related Services shall be provided “as is” without warranty of any kind, and Cirrus hereby disclaims,
and Customer hereby waives, any and all warranties whether express, implied or statutory, including all
implied warranties of merchantability, fitness for a particular purpose and non-infringement. Further, Cirrus
does not warrant, guarantee, or make any representations that any Software provided will be free from all
bugs or that its use will be uninterrupted or error-free. Customer understands and agrees that Cirrus is not
responsible for and will have no liability for equipment hardware, software, or other items or any services
provided by or manufactured by any persons other than Cirrus or its authorized agents. The foregoing
constitutes Customer’s sole rights and remedies under this agreement with respect to defects in the
products, software or services.
Buyer understands and agrees that except for instances involving Cirrus’s indemnification obligations set
forth in the governing Sales Agreement, Cirrus’s aggregate liability for any damages suered by Buyer or
any other party, whether in contract, in tort, under any warranty theory, or otherwise, shall be limited to the
amount paid to Cirrus by Buyer under this Contract for the defective System component(s) giving rise to
the indemnified losses or damages covered by this Agreement.
Warranty activation
TP-Link Wifi kit warranty
Disclaimer
Limitation on liability
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
1’ tall x 2’ wide frames
are assembled using the
included ¼” hex bolts. It is
important to ensure that
all frames are attached
with the arrows facing
front and up.
Four bolts should be
used on each side of
the frame and should
be tightly fastened to
ensure there are no gaps
between the panels. Two
bolts will go in from one
direction and two will
go in from the opposite
direction,
on each side.
Frame assembly
B. Frames and assembly
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
Frame mounting
One row of support mounting brackets(not supplied) must be attached for every four rows of frames. Do
not exceed four rows of frames without attaching an additional mounting bracket.
Mounting brackets should be attached for the entire horizontal length of the frames to prevent bowing or
lateral stress.
Supports
Required
Here
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
Ventilation
BladeM LED panels are passively cooled, so adequate ventilation is required to keep the
display within normal operating temperatures (-40 ~+70 C or -40 ~+158 F). Allowing
natural convection by venting the top and bottom of the display is ideal. Screen, mesh,
or perforated material can be used to enclose the framing system.
Some examples of perforated materials
Note: Proper ventilation is a requirement for the warranty. If top and bottom venting is not an option (as in the case of some
monument signs), as much side venting as possible will be required. Space behind the display in the cabinet may also
be acceptable.
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
The BladeM system is designed to be powered by up to 240-volt service, without any additional
configuration or equipment. The exact electrical requirements will be determined by the number of
panels. Cirrus is unable to provide, consult, or advise on the electrical setup on the
display. All electrical work must be done by a licensed electrician in accordance
with local laws and regulations.
Note: All electrical breakers should be no more than 20 amps
Note: Breakers can not be shared with any other equipment (other LED drivers, cabinet lighting, etc),
and should not have any sort of timer on them.
Note: Displays must be properly grounded (at the breaker or at the display). Electrical damage is not covered under our
warranty (refer to the warranty section for details).
Green — Ground
Black — Hot
White — Neutral (120-volt service)
or hot (240-volt service)
For signs requiring more than one circuit of power, a power injector(s) will be used to provide additional
power. Refer to the power injector section for more details.
9 mm 6 mm
120 Volt 18 panels max per circuit 16 panels max per circuit
240 Volt 36 panels max per circuit 32 panels max per circuit
Power cable
C. Electrical section
With the introduction of the M1 Pro Controller, there is now a built-in power detection system. If
power issues are detected (such as insucient power for the number of panels), the panels will be
shut o automatically as a safety measure. A rapidly flashing red light on the Controller will indicate a
power issue. Cirrus Tech Support should be contacted before restoring power to the panels.
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
Power injectors
Power injectors are used in cases where a sign requires more than a single line of power. Cirrus will
advise on where to place power injectors as part of the pre-install process.
The power injector has three ports - one for the power cable, a cable input, and a cable output.
Power Output Input
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
M1 Pro Controller details
Indicator light
Power Port A Port B Ethernet
WiFi Cell GPS
Button
D. Controller
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
Extension cables
The included extension cables can be used
to enable mounting the controller further
away from the first panel in the chain.
When using an extension, a 2’ panel cable
must be used to connect to a panel.
Note: Do not use two extension cables connected
together, it may result
in data loss and display issues.
Mounting the M1 Pro Controller
The M1 Pro Controller is recommended
to be mounted inside the sign, to prevent
unwanted access. It can be placed outside,
but should not be mounted in direct
sunlight.
The M1 Pro Controller should be mounted
with the side with no ports facing up, so no
water can pool in them. Pooling water may
eventually cause damage to the interior
components.
The M1 Pro Controller can be mounted
using the optional M1 Pro Controller
mounting bracket (see below). The
mounting bracket should be attached using
self-tapping screws to a secure location.
BladeM LED Display System
Installation Manual
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
Connecting the all-in-one antenna
The all-in-one antenna has 5 leads, 2 for wifi (unlabeled), 2 for cellular (purple, labeled LTE), and a
GPS lead (blue).
The two wifi leads should be secured to the WiFi posts, the LTE leads should be secured to the
mobile connections, and the GPS lead should be secured to the GPS connector.
WiFi LTE GPS
Other manuals for BladeM
1
Table of contents
Other Cirrus Monitor manuals
