Cisco Physical Access 1125 Appliance User manual

Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]
800 553-NETS (6387)
Fax: [phone]
Cisco Physical Access 1125 Appliance
User Guide
Release 1.2.0
Text Part Number: OL-20929-01

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL
STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT
SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE
OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public
domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH
ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF
DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO
OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco Nurse Connect, Cisco Pulse, Cisco StackPower,
Cisco StadiumVision, Cisco TelePresence, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flipshare (Design), Flip Ultra,
Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Capital,
Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, and Flip Gift Card are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the
Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press,
Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, EtherSwitch, Event Center, Explorer,
Fast Step, Follow Me Browsing, FormShare, GainMaker, GigaDrive, HomeLink, iLYNX, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, Laser
Link, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX,
PowerKEY, PowerPanels, PowerTV, PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The
Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United
States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship
between Cisco and any other company. (0908R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the
document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
Cisco Physical Access 1125 Appliance User Guide
© 2008-2010 Cisco Systems, Inc. All rights reserved.

i
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
CONTENTS
Preface iii
Obtaining Documentation and Submitting a Service Request iii
Safety Warnings iv
Safety Guidelines vi
General Precautions vi
Protecting Against Electrostatic Discharge vii
Rack Installation Safety Guidelines vii
CHAPTER 1Overview 1-1
Front View and Overview 1-1
Identifying Chassis Components 1-2
System Front Panel 1-2
Appliance Rear Area 1-3
CHAPTER 2Preparing to Rack Mount the 1125 Appliance 2-1
Contents 2-1
Review All Safety Information and Guidelines 2-1
Preparing Your Site for Installation 2-1
Environmental 2-2
Choosing a Site for Installation 2-2
Grounding the System 2-2
Creating a Safe Environment 2-2
AC Power 2-3
Cabling 2-3
Precautions for Rack-Mounting 2-3
Required Tools and Equipment 2-4
CHAPTER 3Rack Mounting the Cisco PAM 1125 Appliance 3-1
Contents 3-1
Overview 3-1
Rack Mounting the Cisco PAM 1125 Appliance 3-2
Installation Precautions 3-2
Contents of the Rail Installation Kit 3-3
Mid-Mounting the 1125 Appliance on a Two-Post Rack 3-4

Contents
ii
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Attaching Brackets to the Chassis 3-4
Attaching L Brackets to Center Posts 3-6
Installing the Chassis in the Rack 3-7
Front-Mounting the 1125 Appliance on a Two-Post Rack 3-9
Attaching the Brackets to the Chassis 3-10
Attaching the L Brackets to the Rack Posts 3-11
Installing the Chassis in the Rack 3-12
Mounting the 1125 Appliance in a Four-Post Rack 3-14
Setting the Multi-Pin Adapters for Rack Type 3-15
Installing the Slide Rails into a Rack with Square Holes 3-16
Installing the Slide Rails into a Rack with Round Holes 3-18
Installing the 1125 Appliance into the Slide Rails 3-19
Connecting to the AC Power Source 3-20
Connecting Cables 3-20
Next Steps 3-20
APPENDIX AHardware Specifications A-1
APPENDIX BTroubleshooting B-1
Contents B-1
Checking the Basics B-1
Checking Connections and Switches B-2

iii
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Preface
This guide provides hardware descriptions and installation instructions for the Cisco Physical Access
1125 Appliance installed with Cisco PAM Release 1.0.0 and 1.1.0. For installations of Cisco PAM
Release 1.2.0 or higher, see the Cisco Physical Security Multi Services Platform User Guide.
This document includes the following information:
• Chapter 1, “Overview.”
• Chapter 2, “Preparing to Rack Mount the 1125 Appliance.”
• Chapter 3, “Rack Mounting the Cisco PAM 1125 Appliance.”
• Appendix A “Hardware Specifications.”
• Appendix B “Troubleshooting.”
Note For instructions to configure the Cisco PAM server software included with the appliance, see the Cisco
Physical Access Manager User Guide.
This preface includes the following additional information:
• Obtaining Documentation and Submitting a Service Request, page iii
• Safety Warnings, page iv
• Safety Guidelines, page vi
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional
information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and
revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed
and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free
service and Cisco currently supports RSS version 2.0.

iv
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Preface
Safety Warnings
Before you install the device, observe the safety warnings in this section.
For more information, see Regulatory Compliance and Safety Information for the Cisco Common
Appliance Model (CAM) Server.
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
Warning Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Statement 1
Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units;
disconnect the power at the circuit breaker on DC units. Statement 12
Warning This unit might have more than one power cord. To reduce the risk of electrical shock, disconnect all
power supply cords before servicing the unit. Statement 106
Warning This is a Class A Information Product, when used in residential environment, it may cause radio
frequency interference, under such circumstances, the user may be requested to take appropriate
countermeasures. Statement 257
Warning Do not attempt to make such connections yourself. Contact the appropriate electric inspection
authority or electrician as appropriate. Statement 285
Warning Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to ensure
your safety:
Warning This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
Warning When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.

v
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Preface
Warning If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
unit in the rack. Statement 1006
Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with
the same or equivalent type recommended by the manufacturer. Dispose of used batteries according
to the manufacturer’s instructions. Statement 1015
Warning This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Warning This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement
1029
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Warning Before opening the unit, disconnect the telephone-network cables to avoid contact with
telephone-network voltages. Statement 1041
Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building
installation. Install only in accordance with national and local wiring regulations. Statement 1045

vi
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Preface
Warning To prevent the system from overheating, do not operate it in an area that exceeds the maximum
recommended ambient temperature of:
35° C
Warning This equipment is intended to be grounded to comply with emission and immunity requirements.
Ensure that the switch functional ground lug is connected to earth ground during normal use.
Statement 1064
Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074
Safety Guidelines
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the
precautions in this section.
General Precautions
Observe the following general precautions for using and working with your system:
• Observe and follow service markings. Do not service any Cisco product except as explained in your
system documentation. Opening or removing covers that are marked with the triangular symbol with
a lightning bolt may expose you to electrical shock. Components inside these compartments should
be serviced only by an authorized service technician.
• If any of the following conditions occur, unplug the product from the electrical outlet and replace
the part or contact your authorized service provider:
– The power cable or plug is damaged.
– An object has fallen into the product.
– The product has been exposed to water.
– The product has been dropped or damaged.
– The product does not operate correctly when you follow the operating instructions.
• Keep your system components away from radiators and heat sources. Also, do not block cooling
vents.
• Do not spill food or liquids on your system components, and never operate the product in a wet
environment.
• Do not push any objects into the openings of your system components. Doing so can cause fire or
electric shock by shorting out interior components.
• Use the product only with other Cisco-approved equipment.
• Allow the product to cool before removing covers or touching internal components.
• Use the correct external power source. Operate the product only from the type of power source
indicated on the electrical ratings label. If you are not sure of the type of power source required,
consult your service representative or local power company.

vii
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Preface
• Use only approved power cables. If you have not been provided with a power cable for your system
or for any AC-powered option intended for your system, purchase a power cable that is approved
for use in your country. The power cable must be rated for the product and for the voltage and
current marked on the product’s electrical ratings label. The voltage and current rating of the cable
should be greater than the ratings marked on the product.
• To help prevent electric shock, plug the system components and peripheral power cables into
properly grounded electrical outlets. These cables are equipped with three-prong plugs to help
ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a cable.
• Observe power strip ratings. Make sure that the total ampere rating of all products plugged into the
power strip does not exceed 80 percent of the power strip ampere ratings limit.
• Do not use appliance or voltage converters or kits sold for appliances with your product.
• To help protect your system components from sudden, transient increases and decreases in electrical
power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).
• Position cables and power cords carefully; route cables and the power cord and plug so that they
cannot be stepped on or tripped over. Be sure that nothing rests on your system components’ cables
or power cord.
• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site
modifications. Always follow your local or national wiring rules.
Protecting Against Electrostatic Discharge
Static electricity can harm delicate components inside the device. To prevent static damage, discharge
static electricity from your body before you touch any of your system’s electronic components. You can
do so by touching an unpainted metal surface on the chassis.
You can also take the following steps to prevent damage from electrostatic discharge (ESD):
• When unpacking a static-sensitive component from its shipping carton, do not remove the
component from the antistatic packing material until you are ready to install the component in your
system. Just before unwrapping the antistatic packaging, be sure to discharge static electricity from
your body.
• When transporting a sensitive component, first place it in an antistatic container or packaging.
• Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads and
workbench pads.
Rack Installation Safety Guidelines
Before installing your device in a rack, review the following guidelines:
• Two or more people are required to install the device in a rack.
• Ensure that the room air temperature is below 95°F (35°C).
• Do not block any air vents; usually 6 inches (15 cm) of space provides proper airflow.
• Plan the device installation starting from the bottom of the rack.
• Install the heaviest device in the bottom of the rack.
• Do not extend more than one device out of the rack at the same time.
• Remove the rack doors and side panels to provide easier access during installation.

viii
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Preface
• Connect the device to a properly grounded outlet.
• Do not overload the power outlet when installing multiple devices in the rack.
• Do not place any object weighing more than 110 lb (50 kg) on top of rack-mounted devices.

CHAPTER
1-1
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
1
Overview
This chapter provides a basic functional overview of the Cisco Physical Access Manager (Cisco PAM)
1125 appliance and describes the hardware, major components, and front and back panel indicators and
controls.
Note The Cisco 1125 appliance is installed with Cisco PAM 1.0.0 and 1.1.0. This User Guide provides a
reference for existing installations. For new installations of Cisco PAM Release 1.2.0 or higher, see the
Cisco Physical Security Multi Services Platform User Guide.
• Front View and Overview, page 1-1
• Identifying Chassis Components, page 1-2
Front View and Overview
Figure 1-1 shows the appliance front view.
Figure 1-1 Cisco PAM Appliance
Cisco Physical Access Manager
187858

1-2
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Chapter 1 Overview
Table 1-1 summarizes the features of the Cisco PAM appliance hardware.
Ta b l e 1-1 Cisco PAM 1125 Appliance Feature Summary
Feature Description
Processor Processor and Front Side Bus (FSB) support
• Supports the following Intel®processors:
– Core 2 Duo E6400 (2.13 GHz)
Memory • Four DIMM sockets
• Support for up to 8 GB of total system memory
• ECC installed
Video On-board video controller with DB-15 port
LAN Two 10/100/1000 Gigabit Ethernet RJ45 ports
Hard Drives Capable of supporting up to two drives, 1.0 in (2.5 cm) in
height
Peripherals One slimline DVD-ROM drive
Power Supply One 350-watt power supply module
Serial Ports • Three USB 2.0 ports (1 front, 2 rear)
• DB9 Serial port
Keyboard and
Mouse
Stacked PS/2 ports for keyboard and mouse
Identifying Chassis Components
This section helps you identify the components of your system. If you are near the system, you can also
use the Quick Reference Label on the inside of the chassis cover to assist in identifying components.
System Front Panel
Figure 1-2 LEDs and Buttons on the Cisco PAM Front Panel
1 2
3 5
4 6
231108

1-3
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Chapter 1 Overview
The following table describes the LEDs and buttons called out in Figure 1-2:
1USB Port 4Hard Disk Drive Activity LED
2Power Button 5ETH0 LED
3System Power LED 6ETH1 LED
Appliance Rear Area
Figure 1-3 Connectors on the Cisco PAM Rear Panel
1 2 4 107 8 11
9653
231107
The following table describes the rear panel connectors called out in Figure 1-3:
1AC Power Connector 6ETH 0 (10/100/1000 Mb)
2Mouse 7ETH 1 (10/100/1000 Mb)
3Keyboard 8USB 0-1
4Serial Port 9PCI Add-in Card Slot
5Video
ETH LED Indicators
The rear of the Cisco PAM appliance system includes LEDs that indicate the activity and speed of
connection for the ETH ports (see Figure 1-4).
Figure 1-4 ETH port LEDs
231350
1 2

1-4
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Chapter 1 Overview
Table 1-2 describes the activity and connection speed associated with each LED state.
Ta b l e 1-2 ETH LED Descriptions
LED LED State Description
Left Off No network connection
Solid Amber Network connection in place
Blinking Amber Transmit/receive activity
Right Off 10 Mbps connection (if left LED is on or
blinking)
Solid Amber 100 Mbps connection
Solid Green 1000 Mbps connection

CHAPTER
2-1
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
2
Preparing to Rack Mount the 1125 Appliance
This chapter describes the safety instructions and site requirements for installing the Cisco PAM
appliance, and guides you through installation preparation.
Contents
• Review All Safety Information and Guidelines, page 2-1
• Preparing Your Site for Installation, page 2-1
• Precautions for Rack-Mounting, page 2-3
• Required Tools and Equipment, page 2-4
Note Read the Regulatory Compliance and Safety Information for Cisco Physical Access Manager document
that came with your device before you begin the installation.
Review All Safety Information and Guidelines
Review all safety warnings and guidelines in the following sections:
• Safety Warnings, page -iv
• Safety Guidelines, page -vi
Preparing Your Site for Installation
This section describes the requirements that your site must meet for safe installation and operation of
your Cisco PAM appliance. Ensure that your site is properly prepared before beginning installation.

2-2
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Chapter 2 Preparing to Rack Mount the 1125 Appliance
Preparing Your Site for Installation
Environmental
When planning your site layout and equipment locations, remember the precautions described in this
section to help avoid equipment failures and reduce the possibility of environmentally caused
shutdowns. If you are experiencing shutdowns or unusually high errors with your existing equipment,
these precautions will help you to isolate the cause of failures and prevent future problems.
Use the following precautions when planning the operating environment for your Cisco PAM:
• Always follow the ESD-prevention procedures described in Protecting Against Electrostatic
Discharge, page -vii, to avoid damage to equipment. Damage from static discharge can cause
immediate or intermittent equipment failure.
• Ensure that the chassis cover is secure. The chassis allows cooling air to flow effectively within it.
An open chassis allows air leaks, which could interrupt and redirect the flow of cooling air from
internal components.
• Electrical equipment generates heat. Ambient air temperature might not be adequate to cool
equipment to acceptable operating temperatures without adequate circulation. Ensure that the room
in which you operate has adequate air circulation.
Choosing a Site for Installation
Warning This unit is intended for installation in restricted access areas. A restricted access area is where
access can only be gained by service personnel through the use of a special tool, lock and key, or
other means of security, and is controlled by the authority responsible for the location.
For optimal installation, choose a site:
• With a dry, clean, well-ventilated and air-conditioned area.
• That maintains an ambient temperature of 10° to 35°C (50° to 95°F).
Grounding the System
Warning Never defeat the ground conductor or operate the equipment in the absence of a suitably installed
ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are
uncertain that suitable grounding is available.
Creating a Safe Environment
Follow these guidelines to create a safe operating environment:
• Keep tools and chassis components off the floor and away from foot traffic.
• Clear the area of possible hazards, such as moist floors, ungrounded power extension cables, and
missing safety grounds.
• Keep the area around the chassis free from dust and foreign conductive material (such as metal
flakes from nearby construction activity).

2-3
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Chapter 2 Preparing to Rack Mount the 1125 Appliance
Precautions for Rack-Mounting
AC Power
Ensure that the plug-socket combination is accessible at all times, because it serves as the main
disconnecting device. For the Cisco PAM power requirements, see Appendix A, “Hardware
Specifications.”
Warning This product requires short-circuit (overcurrent) protection to be provided as part of the building
installation. Install only in accordance with national and local wiring regulations.
Cabling
Use the cables in the accessory kit to connect the Cisco PAM console port to a console or computer that
is running a console program. In addition to using the console cable, use the provided standard Ethernet
cable to connect the Cisco PAM to your network.
Precautions for Rack-Mounting
Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
Observe the following precautions for rack stability and safety. Also refer to the rack installation
documentation accompanying the rack for specific warning and caution statements and procedures.
Note Component refers to any server, storage system, or appliance, and to various peripherals or
supporting hardware.
• Do not move large racks by yourself. Due to the height and weight of the rack, a minimum of two
people are needed to accomplish this task.
• Ensure that the rack is level and stable before extending a component from the rack.
• Do not overload the AC supply branch circuit that provides power to the rack. The total rack load
should not exceed 80% of the branch circuit rating.
• Ensure that proper airflow is provided to components in the rack.
• Do not step or stand on any system or component when servicing other systems and components
in a rack.
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack.

2-4
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Chapter 2 Preparing to Rack Mount the 1125 Appliance
Required Tools and Equipment
Required Tools and Equipment
You need the following tools and equipment to install the Cisco PAM:
• Number 2 Phillips-head screwdriver
• Tape measure and level
• Antistatic mat or antistatic foam
• ESD grounding strap

CHAPTER
3-1
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
3
Rack Mounting the Cisco PAM 1125 Appliance
This chapter describes how to rack mount the Cisco PAM appliance.
Contents
• Overview, page 3-1
• Rack Mounting the Cisco PAM 1125 Appliance, page 3-2
• Connecting to the AC Power Source, page 3-20
• Connecting Cables, page 3-20
• Next Steps, page 3-20
Note For instructions to setup the Cisco PAM server software included with the appliance, see the Cisco
Physical Access Manager User Guide.
Overview
Table 3-1 provides a high-level overview of the installation process.
Ta b l e 3-1 Quick Reference
Task References
Use the rack mount kit to install the
Cisco PAM in a rack.
Rack Mounting the Cisco PAM 1125
Appliance, page 3-2
Connect the Cisco PAM t o an AC
power source.
Connecting to the AC Power Source,
page 3-20
Connect network and console cables. Connecting Cables, page 3-20
Once the appliance is installed, see the Cisco Physical Access Manager User Guide for information on
how to configure Cisco PAM the first time the system is started.

3-2
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Chapter 3 Rack Mounting the Cisco PAM 1125 Appliance
Rack Mounting the Cisco PAM 1125 Appliance
Rack Mounting the Cisco PAM 1125 Appliance
This chapter provides procedures for installing rail hardware on the Cisco PAM appliance and mounting
the appliance on a two-post or four-post rack.
This chapter contains the following sections:
• Installation Precautions, page 3-2
• Contents of the Rail Installation Kit, page 3-3
• Mid-Mounting the 1125 Appliance on a Two-Post Rack, page 3-4
• Front-Mounting the 1125 Appliance on a Two-Post Rack, page 3-9
You will need to have the following items to complete the rack mounting procedure:
• A cross (Phillips) screwdriver
• Four (4) rack screws
Caution The fastener pack, within the rail installation kit, contains eight rack screws, but you must check these
to ensure that they are the appropriate size for the holes in your rack. Using the wrong size screws for
your threaded rack holes can damage the rack.
Installation Precautions
Before you begin the installation, review the warnings and cautions in this section.
Warning APPLIANCE POWER ON/OFF: The push-button on/off power switch on the front panel of the appliance
does not turn off the AC power. To remove AC power from the appliance, you must unplug the AC
power cord from either the power supply or wall outlet.
Warning HAZARDOUS CONDITIONS—POWER SUPPLY: Hazardous voltage, current, and energy levels are
present inside the power supply enclosure. There are no user-serviceable parts inside it; servicing
should only be done by technically qualified personnel.
Warning HAZARDOUS CONDITIONS—DEVICES AND CABLES: Hazardous electrical conditions may be present
on power, telephone, and communication cables. Turn off the appliance and disconnect
telecommunications systems, networks, modems, and the power cord attached to the appliance
before opening it. Otherwise, personal injury or equipment damage can result.
Warning AVOID INJURY: Lifting the appliance chassis and attaching it to the rack is a two-person job. A fully
loaded Cisco PAM appliance can exceed 13.9 kg (30.6 lbs.). If needed, use an appropriate lifting
device.