Citronic MINI MIX-1 User manual

MINI MIX-1
OWNERS MANUAL
172.755UK
Version 1.0

Page 2 of 7
Safet information
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this item near water.
6. Clean onl with dr cloth.
7. Do not block an of the ventilation openings. Install in accordance with the
manufacture’s instructions.
8. Do use near an heat sources such as radiators, heat registers, stoves or other items
(including amplifiers) that produce heat.
9. Protect the USB lead from being walked on or pinched particularl the at plug,
convenience receptacles, and point where the exit from the item.
10. Onl use attachments/accessories specified b the manufacturer.
11. Use onl with a cart, stand, tripod, bracket or table specified b the manufacturer, or
sold with the item. When a cart is used, use caution when moving the cart/item
combination to avoid injur .
12. Unplug this item during lighting storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Serving is required when the item has
been damaged in an wa such as liquid has been spilled or objects have fallen into the
item, the item has been exposed to rain or moisture, does not operate normall , or has
been dropped (note: accidental or cosmetic damage is not covered b the items 12
month warrant )
14. Please keep the unit in a safe environment.
15. Do not store an thing on top of the item.
The exclamation point within the equilateral triangle is intended to alert the user to the
presence of important operation and maintenance (servicing) instructions in the
literature accompan ing this appliance.

Page 3 of 7
Introduction:
The MINI:MIX1 is an amazing 2 channel mixer which doubles up as a sound card for a computer
or laptop. Simple plug and pla via the USB makes setting up extremel eas . The USB acts as
both an input and output, with two RCA inputs on each channel. This mixer can pla from a
variet of music sources such as CD pla ers, MP3 pla ers etc. The 6.3mm microphone jack input
has its own channel with a volume control slider. With the USB OUT ou can record our mix or
create our ver own podcast. Small in size, eas to transport and eas to use.
Main Features:
•Ideal for Laptop DJ’s
•4 x RCA inputs
•1 x USB in/out
•6.3mm jack microphone input with separate slider for volume
•Master volume and channel volume sliders
•2 x RCA output (master/record)
•We recommend Audacit for use when recording with this product
•Compatible with Windows: 2000/XP/Vista/7 and Mac OS X
Accessories:
1 x MINI MIX-1 unit
1 x USB 2.0 Cable
1 x User manual

Page 4 of 7
General Functions and Controls
1. USB PORT - This USB port is used to power the device from either a USB 2.0 connection
on a laptop or external USB PSU (not supplied).
a. LAPTOP: When connected to a laptop not onl does it power but it is recognized
as an external soundcard automaticall allowing pla back of music on Channel B (if
selected).
b. EXTERNAL: If powered b an external USB power suppl (not included) ou can
operate the mixer independentl using the line and phono inputs.
2. OUTPUT:
a. AMP: Unbalanced master output for connecting to an amplifier or active speakers.
b. REC: Line level output to record ou mix.
3. CHANNEL A & CHANNEL B INPUTS:
a. PHONO: For connecting turntables that require a preamp to bring the input to line
level.
b. LINE: For connecting devices such as turn tables, CD pla ers etc with line level
output.
4. GROUND LOOP: To connect turn table ground loop to remove unwanted hum on
pla back.

Page 5 of 7
5. MICROPHONE INPUT – 6.3mm Mono Jack input for connecting a microphone.
6. HEADPHONE VOLUME – Rotar control to adjust the headphone output.
7. 3.5mm HEADPHONE SOCKET – For connecting headphones with a 3.5mm Jack plug.
8. 6.3mm HEADPHONE SOCKET – For connecting headphone with a 6.3mm Jack plug.
9. CHANNEL A INPUT SELECT – Selects the input from either Line IN or Phono IN on
Channel A.
10. USB INPUT ON/OFF – Push to override LINE IN on Ch B to USB input from the
computer. Push again to switch back to LINE IN on Ch B.
11. CHANNEL B INPUT SELECT – Selects the input from either Line IN or Phono IN on
Channel B
12. POWER INDICATOR – To indicate that the power to the mixer is on.

Page 6 of 7
13. MASTER VOLUME – Adjust the master output volume with this slider.
14. CHANNEL B OUTPUT VOLUME – Adjust the slider to change the output volume from
CH B
15. CHANNEL A OUTPUT VOLUME – Adjust the slider to change the output volume from
CH A
16. MICROPHONE VOLUME – Adjust the slider to change the microphone volume.
17. VU METER – Indicates the current output levels, when flashing green output levels are
ok, when flashing red output levels are to high so adjust volumes accordingl .
18. CROSSFADER – Master cross fader to switch the master output from CH A to CH B.
19. CUE SWITCH – Toggle switch to change between cue on CH A or CH B.
S stem Requirements
CPU: Intel Pentium 4, 1 x GHz processor, Intel Centrino Mobile Technolog 1.6GHz or
equivalent.
RAM: 512MB
USB 2.0 or above
OS: Microsoft Windows XP SP3, Vista SP2, Windows 7, or MAC OSX
Specification:
Item Value
Power suppl 5Vdc 500mA (USB 2.0)
Gain (Channel A-B) 0 to -20dB
Headphone impedance 32 ohms
Frequenc response 20Hz-20kHz
Distortion > 0.1%
S/N ratio > 80dB
Channel separation 55db (1kHz)
Phono Sensitivit 20mV, 47k ohms
Line Sensitivit 1V,10k ohms
MIC Sensitivit 20mV 600 ohms
Line output 2.0V, 600 ohms
REC Output 2.0V, 600 ohms
Dimensions 150 x 130 x 55mm
Weight 500g
Note: Specifications and design are subject to change without notice for purpose of improvement.

Page 7 of 7
FOR MORE INFORMATION ON CITRONIC PRODUCTS VISIT
WWW.CITRONIC.COM