LED LIGHT INSTRUCTION
37611
ATTENTION: Please read the following instructions carefully to ensure that mounting operation will be carried out in the right way. These instructions should be
properly preserved for future reference.
I. MAIN CONSTRUCTION DATA
II. BEZPEČNOSTNÍ POKYNY
1. Before mounting and maintenance please make sure that the electrical supply has been switched off to avoid electric shock.
2. The lamp must be earthed.
3. The power cord must be VDE-certified H07RN-F 3x1.0mm2waterproof cable.
4. Replace any cracked protective shield
5. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
6. Check if the stand is stable and it has a firm footing. Ensure cable is not touching any sharp objects and the mains plug connector is adequately protected
against rain or moisture. Now your lamp is ready for use.
7. Please pay attention to that do not touch the back of lampbody while working.
8. Luminaires for rough service.
9. Limitation of use indoors or outdoors.
CAUTION: The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire shall be replaced.