Clarion CZ505 Safety guide

Owner•s ma'nual
&
Installation manual
Mode d•emploi et manuel d>•instaUati:on
Manual
de
lnstrucclones·y de lnstalaclon
(((Sirlusxm,>)
READY
Bluetooth•
CD/USB/MP3/WMA
RECEIVER
RECEPTEUR
Bluetooth®
CD/USB/MP31WMA
RECEPTOR
Bluetooth•
CD/USBIMP3/WMA

CLARION PRODUCTREGISTRATION INFORMATION
Dear Customer:
For
USA
and
Canada
only
www.cladon.com
Congratulations on your purchase of a Clarion mobile electronic products.
We
are confident
that you'll enjoy your Clarion experience. ·
There are many benefits to registering your product. We invite you to visit our website at
www.ctarton.com
to register your Clarion product.
We have made product registration simple with our easy to use website. The registration form
is short and easy to complete. Once you're registered, we can keep you informed of important
product information.
Register at
www.ctarton.com
•
it's easy to keep your Clarion product up to date.
INFORMATIONS
DE
L'ENREGISTREMENT
DE
PRODUITS
CLARION
Cher client:
Pour
les Etas
Unis
et
le
Canada
seulement
www
clarlon.com
Nous vous remercions d'avoir achete ce produit electronique mobile Clarion. Nous sommes
confiantsque vous apprecierez votre experience Clarion.
II
ya beaucoup
d'a~antage
aenreglstrer votre produits. Nous vous invitons a
visiter notre site
Web
www.clarlon.com
pour enregistrer votre produit Clarion.
Nous avons facilite
Ia
tache d'enregistrement
de
produit simple et facile grAce
a
notre siteWeb.
Le
formulaire d'enregistrement est court
et
facile acompleter. Lorsque vous etes enregistrer,
nous pouvons vous tenir informe des informations important
de
produits.
Enregistrer
awww.cladon com -
c'est facile
de
mettre
a
jour votre produit Clarion.
INFORMACI6N
DEL
REGISTRO
DE
PRODUCTO
DE
CLARION
Querida Cliente:
Para
USA
y
Canada
nomas
www.clarion.com
Felicitaciones por
su
compra
de
producto electr6nico m6vil
de
Clarion. Estamos seguros que
usted gozara
de
su
experiencia con el producto
de
Clarion.
Hay muchas ventajas al registrar su producto. Le invitamos a que visite nuestro sitio en internet
www.clarton.com
para registrar su producto
de
Clarion.
Hemos hecho el registro
de
prod.Jcto facil en ruestro sitio. La forma de registro es corta y facil
de
completar. Unavez que lo registre, podremos proporcionarle Ia infonnaci6n de
su
prod.lcto.
Registrese
en
WVQY.Ciarioo,com
-
es
facil
mantener
su
producto de Clarion actualizado.
Under Industry Canada regulations, this radio transmitter
may
only operate using an antenna
of
a
type and maximum (or
Jesser)
gain approved for the transmitter
by
Industry Canada.
To
reduce
potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropical/y radiated
power
(e.i.r.p.)
is
not
more than that necessary for
successful communication.
Conformement
a
Ia
reg/ementation d'/ndustrie Canada,
/e
present emetteurradio
peut
fonctionner avec une antenne d'un type
et
d'un gain maximal (ou inferieur) approuve
pour
/'emetteur
par
lndustrie Canada. Dans
/e
but
de reduire
Jes
risques de brouil/age radioe/ectrique
a
/'intention des autres utilisateurs, if taut choisir
/e
type d'antenne
et
son gain de sorte que
Ia
puissance isotrope rayonnee equiva/ente (p.i.r.e.) ne depasse pas /'intensite necessaire
a
/'etablissement d'une communication satisfaisante.
2
CZ505
Contents
Thank you for purchasing this Clarion product.
• Please fully read this owner's manual before operating this equipment.
• Check the contents of the enclosed warranty card and store it in a safe place with this manual.
1
I
FEATURES.......................................................................................................................3
2. PRECAUTIONS ................................................................................................................3
Front Panel
I
Generalities ..............................................................................................4
USB Port ........................................................................................................................4
Remove the DCP ...........................................................................................................5
Attach the DCP ..............................................................................................................5
3. CONTROLS......................................................................................................................5
Operational Panel ..........................................................................................................5
Names of Buttons...........................................................................................................5
Notes for use of Remote Control....................................................................................6
Remote Control (RCX001) .............................................................................................6
4.
CAUTIONS ON HANDLING .............................................................................................7
Handling Discs ...............................................................................................................7
5. OPERATIONS
...................................................................................................................7
Basic Operations............................................................................................................7
System Setup................................................................................................................. 8
Audio Setup....................................................................................................................9
Radio Operations ...........................................................................................................9
HD Radio Operations ...................................................................................................10
SiriusXM Satellite Radio Operations ............................................................................1
0
CD/MP3/WMA Operations ........................................................................................... 12
USB Operations ...........................................................................................................13
iPod
&
iPhone Operations............................................................................................ 13
Bluetooth Operations ...................................................................................................14
AUX Operations ........................................................................................................... 15
6. TROUBLE SHOOTING...................................................................................................16
7. ERROR DISPLAYS
.........................................................................................................17
8. SPECIFICATIONS ..........................................................................................................
17
9. INSTALLATION I WIRE CONNECTION GUIDE.........
:.................................................. 18

1. FEATURES
• SiriusXM-Ready™ and HD Radio™ Receiver with iTunes~ Tagging
• Built-in
Bluetooth~ Handsfree (HFP) and Audio Streaming(A2DP with aptX~ &A VRCP)
• 728 Variable Color Illumination Control
WJm~~~
DIGITAL AUDIO
0 Bluetooth"
..q}Radio"
WORKS WITH
PANDORA
I MP3/WMAI
((<SiriusXm)))
READY
Made for
~ iPod D iPhone
USB
Expanding Systems
Expanding audio features
6 Channel Amplifier
~ ~ Slriu,Conn~~
~ Portable Player
(Connect via AUX
IN Jack)
Bluetoothe Vehicle Tuner
cellular phone
Note:
• The items listed only show connectivityoptions and are not included with the unit.
• CCA-755:
Sold separately.
• Optional CCA-750 (iPod cable) also available,
but CZ505 doesn't have iPod Video function,
so even
if connect to the Monitor, CZ505 doesn'tplaybackthe video.
2. PRECAUTIONS
For your safety, the driver should not operate the controls while driving.
Also, while driving, keep the volume to a level at which external sounds can be heard.
1. When the interior of the car is extremely
cold and the player
is used soon after
switching
on the heater, moisture may
form
on the disc or the optical parts of the
player and proper playback may not be
possible. If moisture forms
on the disc,
wipe
it off with a soft cloth. If moisture
forms
on the optical parts of the player,
do not use the player for about one hour.
The condensation will disappear naturally
allowing normal operation.
2. Driving on extremely bumpy surface can
cause the disc to skip during playback.
3. This unit uses precision parts and
components for its operation.
In the event
that trouble arises, never open the case,
disassemble the unit, or lubricate the
rotating parts. Contact your Clarion dealer
or service center.
4. FCC STATEMENT
4.1 . This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference.
(2)
This device must accept any interference
received, including interference that
may cause undesired operation.
4.2. Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
•
Reorient or relocate the receiving
antenna.
•
Increase the separation between the
equipment and receiver.
• Connect the equipment into
an outlet on
a circuit different from that to which the
receiver
is connected.
•
Consult the dealer or an experienced
radio!TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation
exposure limits set forth for
an uncontrolled
environment. This equipment should be
installed and operated with minimum
distance 20cm between the radiator & your
body
5. "Made for iPod" and "Made for iPhone"
mean that an electronic accessory has
been designed to
connect specifically
to iPod or iPhone, respectively, and has
been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation
of this device or its compliance with safety
and regulatory standards.
CZ505
3

Please note that the use of this accessory
with iPod or iPhone may affect wireless
performance.
iPhone, iPod and iTunes are trademarks
of Apple Inc., registered
in
the U.S. and
other countries.
6.
Pandora,
the
Pandora
logo,
and the
Pandora trade dress are trademarks or
registered trademarks of Pandora Media,
Inc. used with permission.
Pandora is currently only available
in
the
United States, Australia and New Zealand.
If you have any issues with the Pandora
application on your mobile phone, please
direct them to pandora-support@pandora.
com.
7.
The Bluetooth word mark and logos are
registered
trademarks
owned
by
the
Bluetooth SIG, Inc. and any use of such
marks by Clarion Co.,
Ltd
is under license.
Other trademarks and trade names are
those of their respective owners.
8.
Sirius,
XM
and all related marks and logos
are trademarks of Sirius
XM
Radio
Inc.
All
rights reserved.
9.
HD Radio™, HD Radio Ready™, and
the HD Radio Ready logo are proprietary
trademarks of iBiquity Digital Corporation.
This HD Radio Ready receiver is ready
to receive H
D Radio broadcasts when
connected to the THD301, sold separately.
4
CZ505
10.
The aptX®mark and the aptX logo are
trade marks of CSR pic or one of its
group companies
and
may
be
registered
in
one or more jurisdictions.
11.
-English:
This
device
complies
with
Industry
Canada
licence-exempt
RSS
standard(s). Operation is subject
to
the
following two conditions:
(1)
this device
may not cause interference, and
(2)
this
device must accept any interference,
including interference that may cause
undesired operation of the device.
-French:
Le
present appareil est conforme aux
CNR
d'lndustrie
Canada applicables
aux appareils radio exempts
de
licence.
L'exploitation est autorisee aux deux
conditions suivantes : (1) l'appareil
ne
doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter
tout
brouillage
radioelectrique
subi,
meme
si
le brouillage est susceptible
d'en compromettre
le
fonctionnement.
CZ505
!INFORMATION FOR USERS:
Changes or modifications to this product
unapproved by the manufacturer will void the
warranty and will violate
FCC
approval.
Front PanelI Generalities
For a longer service life,
be
sure to read the
following cautions.
•
Do
not allow any liquids
on
the unit from
drinks, umbrellas, etc. Doing
so
may
damage the internal circuitry.
•
Do
not disassemble or modify the unit
in
any way. Doing
so
may result
in
damage.
•
Do
not let cigarettes burn the display. Do-
ing
so
may damage or deform the body.
•
If
a problem should occur, have the unit
inspected at your store of purchase.
• The remote control unit may not work
if
the remote control sensor is exposed to
direct sunlight.
Cleaning the body
Use a soft, dry cloth and gently wipe off
any dirt or dust.
For tough dirt, apply some neutral deter-
gent diluted
in
water
to
a soft cloth, wipe
off the dirt gently, then wipe again with a
dry cloth.
Do
not use benzene, thinner, car cleaner,
etc.,
as
these substances may damage
the body or cause the paint to peel. Also,
leaving rubber or plastic products
in
contact with the body for long periods of
time may cause stains.
USB Port
• The USB memory stick may stick out when
inserted, so it may cause danger during
driving. When connect USB memory stick
to the source unit, please use the USB
extension cable(CCA-755).
•
The
USB
memory
sticks
must
be
recognized
as
"USB mass storage class"
to work properly. Some models may not
operate correctly.
When the memorized data is lost or
damaged by any chance, Clarion shall
not
be
liable for any damage.
When using the USB memory stick, we
recommend that you backup your data
stored
on it
before
using
a
personal
computer etc.
• Data files may be broken when using USB
memory sticks
in
the following situation:
When
disconnecting
the USB memory
stick or turning the power off while reading
data.
When
affected
by
static
electricity
or
electric noise.
Connect/disconnect the USB memory stick
when it
is
not accessed.
•
Connecting
with
the
computer
is
not
available.

Remove the DCP
The control panel can be detached to prevent
theft. When detaching the control panel, keep
it in the safety place and prevent scratches.
We recommend taking the DCP
(DETACHABLE CONTROL PANEL) with you
when leaving the car.
1. Press the [<!>I SRC] button (1 sec .) to turn
off the power.
2. Deeply push into [OPEN] button to unlock
the DCP.
3. Hold the side popped out , remove the
DCP.
Attach the DCP
1. Hold the DCP and ensure that the panel
faces towards you. Setthe right side of the
DCP into the DCP bracket.
2. Press the left side of the DCP until it locks.
A .CAUTION
• The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject itto
strong shocks.
• Once the [OPEN] button is pressed and DCP is unlocked, carvibrations can cause the DCP to fall.
• The connector for the main unit and DCP is extremely important. Be careful not to damage
it by
pressing on itwith fingernails, screwdrivers, etc.
Note:
If the DCP is dirty, wipe off the dirt with a soft, drycloth only.
3. CONTROLS
OperationalPanel
[MIC]
I ~
[<!> I SRC] Dl sc :Siot [ ~]
I
1
~ Lr- ..... -t ........................................ ~~ ................................... ~\~~~~~~ 1
.. .. '(!D #' ~r
- -1-_.b J ll... ...Jllli' ))
11-t="n-......, . \,_;:::.::.:.~o+-M..,.:I..u"·' ·~ ·:
~ c> SRC
I
[DISP]
[VOLUME]
(OPEN]
Names of Buttons
[ <!>I SRC ] Button
• Toggle the audio source
• Power on I Power off (long press)
[BAND I AS /lC] Button
• RADIO mode - Select tuner band I Auto
memory store (long press)
•
BT mode- Dial / AnswerI Transfer call / Redial
•
SlrlusXM mode -Select tuner band I Select
category (long press)
[ MENU I~] Button
MP31WMA mode -Search function
CD mode -No function
RADIO mode -No function
AUX mode -No function
USB mode-Search function
IPod
mode- iPod menu
Pandora mode -Station select
BT mode -Terminate call
SlrlusXM mode -Direct select
(~]Button
• Press to eject disc
' SCH
,
RPT .
2
I
[~~~]Button
• Play I Pause
.....
- TOP
s •
I
I
[ 1-6]
• SiriusXM mode- Channel scan (in curren t
category) I Preset scan (long press)
[...,./..-.t] Buttons
• RADIO mode - Manual tuning I Auto search
(l ong press)
• MP31WMA/CD/USB/iPod mode
-Previous I next track
-Fast Forward I Fast Backward (long press)
• Pandora mode - Skip track (
11+1 )
[OPEN] Button
• Unlock t he front panel
( P] Button
• Sound effect setti ng
[VOLUME] Knob
• Adjust volume lev el / Confirm (press)
• Pandoramode -Bookmark
tr ack
• SlrlusXM
mode- iTunes tagging (long press)
CZ505 5

Names
of
Buttons
(1-6]
Buttons
• [1] Button:
Scan
play
I
Preset
station
I
Preset
station
memory
1
(long press) I
Pandora
mode -
Thumbs down
•
[2)
Button: Repeat
play
I
Preset
station
2
I
Preset
station
memory
2
(long press)
I Pandora
mode -
Thumbs
up
•
[3)
Button: Random play
I
Preset station 3
I
Preset station memory 3 (long
press)
I Pandora
mode -Create
new station by Artist
I
by Track
(long press)
•
[4)
Button:
Top
play
I
Preset
station 4
1
Preset station memory 4 (long
press)
•
[5)
Button: Previous folder
I
Preset station
5 I Preset
station
memory
5
(long press) I
Pandora
mode -
Previous station
10 tracks down (long press)
•
(6)
Button: Next folder I Preset station
6
I
Preset station memory 6
(long press)
10
tracks
up (long
press)
I
Pandora
mode
-
Next
Station
[DISP] Button
• Display change
• System setup (long press)
[MIC]
Hole
• Internal microphone
Notes for use
of
Remote Control
1.
Aim
the remote control at the remote sensor
on the unit.
2. Remove the battery from the remote control
or insert a battery insulator
if
the battery has
not been used fora month or longer.
3.
DO
NOT
store the remote control
under
direct
sunlight
or
in
high
temperature
environment,
or
itmay not function properly.
4.
Use
"button
shaped
"
lithium
battery
"CR2025" (3V) only.
5.
D.O
NOT
subject
battery
to
recharge,
disassemble
,
heat
or
dispose
in fire
or
water.
6.1nsert
the
battery
in
proper
direction
according to the(+) and(-) polarities.
7.
Store the battery in a place where children
cannot reach to avoid the risk
of
accident.
6
CZ505
Inserting the Battery
1.Slide remote control unit
's
rear cover in
the direction shown.
2.1nsert
battery
(CR2025)
into
insertion
guides with printed side(+) up.
3.
Press battery into compartment as shown.
4.
Replace and slide cover until it clicks into
place.
Remote Control (RCX001)
[SRC I
<!.>
]
Button
• Toggle the audio source
• Power on I Power off (long press)
[1+11
,
~]Buttons
• Preset station up
I
down
• Previous I next track
• Search (long press)
• Pandora
mode -Skip track (
~
)
[SCN I
PSI
AS] Button
• Scan play
I
Preset scan
• Auto store (long press)
• Pandora
mode -Thumbs down
• SlrlusXM
mode-
Channel scan (in current
category)
I
Preset scan (long press)
[BAND
I
TOP] Button
!SRC
H
!>J
--,..-
~
J
• CDIMP31WMAIUSB
mode-
Top play
• RADIO
mode-Select tuner band
• Pandora
mode -Next station
• SlrlusXM
mode-
Select tuner band
I
Select
r-
.
-1
--tt-
-v.._'
category (long press)
(
..,.
,
..,.
] Buttons
• Volume upI down
[~II]
Button
• Play
I
Pause
[ISR] Button
•
No
function
[DISP] Button
• Display change
[ROM] Button
• Random play
• Pandora
mode -Bookmark track
[RPT] Button
• Repeat play
• Pandora
mode -Thumbs up
[MUTE] Button
• Mute the volume
clarloo
[BAND/TOP)

4. CAUTIONS ON HANDLING
Handling Discs
Handling
• New discs may have some roughness
around the edges. If such discs are used,
the player may not work or the sound may
skip. Use a ball-point pen or the like to
remove any roughness from the edge of
the disc.
• Never stick labels on the surface of the disc
or mark the surface with a pencil or pen.
• Never play a disc with any cellophane tape
or other glue on it or with peeling off marks.
If you try to play such a disc, you may not
be able to get it back out of the player or it
may damage the player.
• Do not use discs that have large scratches,
are misshapen, cracked, etc.
Use of such discs may cause misoperation
or damage.
• To remove a disc from its storage case,
press down on the center of the case and
lift the disc out, holding it carefully by the
edges.
• Do not use commercially available disc
protection sheets or discs equipped with
stabilizers, etc. These may damage the
disc or cause breakdown of the internal
mechanism.
Storage
• Do not expose discs to direct sunlight or
any heat source.
• Do not expose discs to excess humidity or
dust.
• Do not expose discs to direct heat from
heaters.
Cleaning
• To remove fingermarks and dust, use a soft
cloth and wipe
in a straight line from the
center of the disc to the circumference.
Do not use any solvents, such as commer-
cially available cleaners, anti-static spray,
or thinner to clean discs.
• After using special disc cleaner, let the disc
dry off well before playing
it.
On Discs
• Never turn off the power and remove the
unit from the car with a disc loaded.
For your safety, the driver should not insert
or eject a disc while driving.
5. OPERATIONS
Basic Operations
Note:
• Refer to the diagrams in "3. CONTROLS"
when reading this chapter.
A CAUTION
When the unit is turned on, starting and
stopping the engine with Its volume raised to
the maximum level may harm your hearing.
Be careful about adjusting the volume.
Power onI off
Notes:
• Start the engine before using this unit.
• Be careful about using this unit for a long
time without running the engine. If you
drain the battery too far, you may not be
able to start the engine and this can reduce
the service life of the battery.
1. Start the engine. The power button I knob
illumination on the unit will light up.
~ EngineON
\..?WJ position
2. Press the [<!> 1 SRC] button on the front
panel or the remote control to turn on the
power under standby mode. The unit goes
back to the last status after power on.
3. Press and hold the [<!> 1SRC] button on the
front panel or the remote control to turn off
the power.
Mute
Press the [MUTE] button on the remote control
to mute the volume from the unit.
Note:
Doing the operation above again or adjusting
volume will release muting.
Volume adjustment
Rotate the [VOLUME] knob on the front panel
or press the [ • ] or [ • ] button on the remote
control.
The adjustable range of volume is 0 to 40.
AcAunoN
While driving, keep the volume level at
which external sounds can still be heard.
Playing source selection
Press [<!> 1SRC] button on the front panel or
remote control repeatedly to choose desired
playing source.
Note:
Playing source selection means selecting which
mode, such
as DISC mode, RADIO mode and
AUXmode.
Display system time
Press the [DISP] button on the front panel or
remote control to change the display information
from clock, station information (radio mode), or
track information (CD mode).
RESET
If you have following problems, please press
[RESET] button.
• Unit can not power on
• Nothing happens when buttons are pressed
• Display is not accurate
Note:
* When the [RESET] button is pressed, preset
radio stations, audio setting, etc. stored
in
memory are cleared.
~
~
RESET
CZ505 7

System Setup
In
any mode, press and hold [DISP] button
to
enter system setup. Press [ •
..,..
) or [
..,....,...
)
button to select options, rotate
the
[VOLUME]
knob
to
adjust.
CLOCK
Press the
[VOLUME]
knob to enter clock
setting mode, rotate the [VOLUME] knob
to
set clock, press [ ....,.. ] or [
..,....,...
) button
to
select hour or minute, press and hold the
[VOLUME] knob
to
confirm.
DX/LO (RADIO mode)
Rotate the [VOLUME] knob
to
choose radio
local or distant at RADIO mode.
• LO: Only stations with strong signal can
be received.
•
OX:
Stations with strong and weak signals
can
be
received.
S-CTRL (iPod mode) : ON/OFF
Rotate
the
[VOLUME]
knob
to
choose
S-CTRL (Simple control)
ON
or OFF.
* Refer to Page
13.
AUX SENS (AUX mode)
Rotate the [VOLUME] knob to choose AUX
Input sensitivity LOW, MID or HIGH at AUX
mode.
PARENTAL PASSWORD (SiriusXM mode)
Change parental password. Original code is
"0000"
LOCK
CH
(SiriusXM mode)
Lock the current channel
UNLOCK
ALL
CH
(SiriusXM mode)
Unlock all parental locked channels.
SELECT
This
"SELECT"
menu
is
intended
to
automatically paired by selecting a mobile
phone was stored.
This unit can store three mobile phones. The
mobile phone will be stored
in
paired order
to the unit. The fourth mobile phone can not
be
stored. If you want
to
store a fourth mobile
phone, please delete unwanted mobile phone
from "DELETE" menu.
8
CZ505
1.
Rotate the
[VOLUME]
knob to choose
the paired mobile phone name from the
pa1ring
list.
2.
Press and hold the [VOLUME] knob
to
confirm.
DELETE
1. Rotate the
[VOLUME]
knob
to
choose
the paired mobile phone name from the
pairing list.
2.
Press and hold the [VOLUME] knob
to
confirm.
DISCON (BT mode)
Disconnect
currently
connected
mobile
phone.
1.
Rotate
the
[VOLUME]
knob
,
mobile
phone displays are currently connected.
2.
Press and hold the [VOLUME] knob to
disconnect.
MIC GAIN
Rotate the [VOLUME] knob
to
choose Mic
gain: LOW, MID, HIGH.
You can change the gain of MIG when a
telephone partner cannot hear your voice.
MIC SEL
Rotate
the
[VOLUME]
knob
to
choose
Microphone EXTERNAL or INTERNAL.
AUTO ANS
To answer incoming calls automatically.
Rotate
the
[VOLUME]
knob
to
choose
AUTO
ANSON
or OFF.
AUTO CON: ON/OFF
Automatically connects the mobile phone
was last connected.
Rotate
the
[VOLUME]
knob
to
choose
AUTO CON
ON
or OFF.
PIN CODE
Rotate
and
press
the
[VOLUME]
knob
to
choose
a
4-digit
password. Press the
[VOLUME]
knob more than 1 seconds to
confirm.
The
PIN
CODE default setting
is
" 0000
".
COLOR
Rotate
the
[VOLUME]
knob
to
choose
backlight color.
• SCN: The backlight change circularly.
• COLOR 01-12: Select a preset color.
• USER1-3: Select your favorite color. Press
the knob
to
enter color setting mode, press
[
1~<11111)
or [
..,....,..,]
button
to
select GREEN, BLUE
or RED, the rotate the
[VOLUME]
knob to
select a color.
Press and hold
[VOLUME)
knob
to
memory.
SCRN SVR: ON/OFF
Rotate the [VOLUME] knob
to
choose SCAN
SVR (screen saver)
ON
or OFF.
SCROLL: ON/OFF
For track information that
is
longer than the
display panel:
When SCROLL
is
ON,
the LCD will scroll the
ID3 TAG information across the display, e.g
.:
FILE->FOLDER->
TITLE->ARTIST->ALBUM-
>FILE->
...
When SCROLL
is
OFF, the LCD will display
one of the ID3 TAG information, the default
is
TRACK, but user can adjust it
to
other ID3
TAG information
by
press [DISP] button.
SW PHASE
Rotate
the
[VOLUME]
knob
to
choose
SUBWOOFER phase REVERSE
or
NORMAL.
TEL-SW
Rotate the [VOLUME] knob
to
choose MUTE,
ON
or OFF.
• MUTE:
The sound from this unit is muted during
telephone calls.
• OFF:
This unit continues normal operation even
when the cellular phone
is
used.
•
ON:
You
can listen to your telephone calls from
the speakers connected
to
this unit.
*When listening to your calls
on
your car
speakers, you can adjust the volume by
turning the [VOLUME] knob.
DIMMER: ON/OFF
Rotate
the
[VOLUME]
knob
to
choose
DIMMER
ON
or OFF.
•
ON:
LCD dimmer
is
active when small
light of vehicle
is
turned
ON
.
• OFF: LCD always maximum brightness
regardless
of
the
vehicle
small
light.
BEEP: ON/OFF
Rotate
the
[VOLUME]
knob to
choose
button beep sound
ON
or OFF.
12/24H
Rotate the [VOLUME] knob
to
choose time
format:
12
or 24 hours.

Audio
Setup
Press the [
.P
]
button to enter sound effect
setting mode. First press shows current EO.
Rotate the [VOLUME] knob to changes BEAT
EO
in
this order:
OFF
->
B-BOOST -> IMPACT
->
EXCITE
->
CUSTOM
Rotate
the
[VOLUME]
knob
to
changes
CUSTOM, and press the
[VOLUME]
knob,
the press [
~
] or [
..,._..
] button to select
it
including: BASS-G
->
BASS-F
->
BASS-O
->
MID-G -> MID-F
->
MID-Q
->
TREBLE-G ->
TREBLE-F
->
TREBLE-0, rotate the [VOLUME]
knob to select a value.
BASS-G I MID-G I TREBLE-G: (-7)- (+7)
BASS-F: 50 I 100 I 200
BASS-O: 0.7 I 1.0 I 1.4 I 2.0
MID-F: 50011 K I 2K
MID-0: 0.7 I 1.0 I 1.4 I 2.0
TREBLE-F: 5k I 1
Ok
I 15k
TREBLE-Q: 0.7 I 1.0 I 1.4 I 2.0
Press the [
.P
]
button, then press [
~
) or
[
..,._..
]
button
to
select
USER
preset
including:
BALANCE
->
FADER -> M-B EX -> HPF
(high pass filter)
->
LPF (low pass filter)
->
SUBW VOL (Subwoofer Volume), rotate the
[VOLUME] knob to select a value.
BALANCE: LEFT 1-7
->CENTER->
RIGHT
1-7
FADER: FRONT 1-7
->CENTER->
REAR
1-7
M-BEX:
ON
I OFF
HPF: THROUGH I 60 I 90 I 120
LPF: THROUGH I 60 I 90 I 120
SUBW VOL:
(-6)-
(+6)
Radio Operations
Select tuneras
playing
source
Press
[<!.>
1
SAC] button once or more to enter
RADIO mode.
Selecting the radio
band
Press the [BAND] button
on
the panel or
on
the remote control to select one radio band
among
FM1, FM2, FM3,
AM.
Manual
tuning
During manual tuning, the frequency will
be
changed
in
steps.
Press the
[...,..]
or [
~]
button
on
the panel
to tune in a lower
I
higher station.
Press the
[...,..]
or [
~]
button
on
the remote
control to select preset stations.
Auto
tuning
Press and hold the [ ...,.. ) or [
~
) button to
seek a lower I higher station.
To stop searching, repeat the operation above
or press other buttons having radio functions.
Note:
When a station
is
received, searching stops
and the station is played.
Presetscan
Preset scan receives the stations stored
in
preset memory in order. This function is
useful when searching for a desired station
in
memory.
1.
Press the
[SCN/PS/AS]
on the remote
control button.
2.
When
a
desired
station
is
tuned
in,
press the [SCN/PS/AS] button again to
continue receiving that station.
Note:
Be careful not to press and hold the [SCN/
PS/AS]
button
for
1
second
or
longer,
otherwise the auto store function will begin
and the unit starts storing stations.
Auto
store
The unit stores the strongest stations found
in
the entire Band.
Press and hold the [BAND/ASAC] button
(1
sec.) or [PSIAS] button
on
the remote control
to start automatic station search.
To stop auto store, press other buttons having
radio functions.
Notes:
1.
After auto
store,
the
previous stored stations
will
be
overwritten.
2. The unit has 4 bands, such as
FM1,
FM2,
FM3
and
AM
.FM3 and
AM
can store
by
AS
function. Each band can store 6 stations,
CZ505 can store 24 stations
in
total.
Manual store
When one expected radio station has been
detected, press and hold number button 1-6
to store
it
in
the memory.
Recall the
stored
stations
Press one numeric button among 1 to 6
on
the panel to select the corresponding stored
station.
Local
seeking
When LOCAL seeking is ON, only those radio
stations
with
strong
radio
signal
could
be
received.
To select LOCAL function, press and hold the
[
DISP)
button
on
the front panel, then press
[
~]
button repeatedly until LO or
OX
displays
on
the
screen,
and
rotate the [VOLUME] knob
to
select Local or Distant mode.
Note:
The number of radio stations that can be re-
ceived will decrease when Local mode
is
ON.
CZ505
9

HD Radio Operations
About
HD
Radio
TM
Technology
HD Radio Technology allows CO-quality
digital broadcasting of your local
AM
and
FM
radio stations. HD Radio broadcasts
can include multiple channels
on
the same
frequency, which
is
called multicasting. With
multicasting, you can receive up to eight
additional multicast channels: HD1-HD8.
With an HD Radio tuner connected, you
will receive HD Radio digital broadcasts
automatically when tuned to a station that
offers
HD
Radio Technology.
NOTE:
Not
all
FM
or
AM
stations
offer
HD Radio (digital) broadcasting. You can
receive
both
analog
and
digital
stations
with the unit.
Accessing radio mode
Press the
[c!>
I
SRC] button
on
the front panel
or remote control
to
switch
to
the HD RADIO
source, and
HD
icon
will illuminate.
Selecta
band
Press the [BANDIAS/tc] button to change
between three
FM
and one
AM
bands. Each
band stores
up
to
six preset stations.
Tuning
-Seek Tuning
Press and hold the
[~+~~]
or
[..,...]
button to
seek the next/previous station automatically.
-Manual Tuning
Press the
[~+~~]
or
[..,...]
button to move the
radio frequency number up or down one
step.
HD
Radio multicastchannels
To tune to
an
HD Radio multicast channel,
tune to the main signal and then press the
[MENU I
-.:j ]
button
on
the panel. PTY and
SUB
CH
are displayed. Select
PTY
or SUB
CH
by rotate [VOLUME] knob and push to
confirm.
• Select
PTY
type from the category list by
rotate [VOLUME] knob and push.
• Select SUB
CH
by
rotate [VOLUME] knob
and push.
10
CZ505
• Multi channel is available when a digital
signal is detected, the DIGITAL icon will
illuminate. If the digital signal becomes
unavailable, the unit will revert to Analog
reception.
Presetstations
Up
to
six
stations
on
each
band can be
stored as presets, which can then be instantly
recalled by pressing the associated preset
button. To store a station, turn the radio
on
and select the desired band and station. Press
and hold the desired preset button (numbered
one through six on the face of the radio or
remote control) for more than 1 second. When
stored, the preset number will appear
in
the
display. The station
is
now stored and can be
recalled by pressing the corresponding preset
button. Repeat for the remaining five presets
on the current band and for presets on the
other four bands.
NOTE: Multicast stations can be stored as
presets,
but
the
unit
must
be In Digital
or
Auto
reception mode to receive them.
Presetscan
Press the [PS/AS] button
to
scan and play all
preset stations for 10 seconds each. Press
[PS/AS] again to stop scanning and play the
current station.
Note:
Be
careful not
to
press and hold the [PS/AS]
button for 1 second or longer, otherwise the
auto store function
is
engaged and the unit
starts storing stations.
Automatic
store (AS)
Press and hold the [PS/AS] button
(1
sec.) to
select six strong stations and store them
in
the
FM3 or
AM
band using the Auto Store feature.
After entering the stations into memory, the
unit will automatically stop at each station for
five seconds, allowing you to preview each
selection. When using the Auto Store feature,
the new stations replace any stations already
stored
in
preset memory.
Note:
You can stop the Auto Store function at any
time by pressing the [PSIAS] button again.
SiriusXMSatellite Radio Operations
Only SiriusXM® brings you more of what you
love
to
listen
to,
all
in
one place.
Get over 140 channels, including commercial-
free music plus the best sports, news, talk,
comedy and entertainment. Welcome to the
world of satellite radio.
A SiriusXM Vehicle Tuner and Subscription
are required. For more information, visit
www.
siriusxm.com.
Displaying the Radio ID
Before you listen to satellite radio, you must
subscribe to the service using the SiriusXM
Radio
ID
number.
1.
Press
[c!>
I
SRC] button
to
activate Siri-
usXM-mode.
2.
Press
[...,..]or
[..,...]to
select channel
"0".
The unit displays Radio
10.
Radio I
D.
Note that unit does not display
"OCH"
when
you
tune to channel
"0".
Activating
your
SiriusXMSubscrip-
tion
After
installing
your
SiriusXM-Connect
Vehicle Tuner and antenna, power
on
your
headunit and select SiriusXM mode. You
should be able
to
hear the SiriusXM preview
channel
on
Channel 1
. If you cannot hear the
preview channel, please check the installation
instructions
to make sure
your
SiriusXM
Connect tuner
is
properly installed.
After you can hear the Preview channel, tune
to Channel 0 to find the Radio
10
of your
tuner.
In
addition, the Radio
ID
is
located
on
the bottom of the SiriusXM Connect Vehicle
Tuner and its packaging. You will need this
number to activate your subscription. Write
the number down for reference.
Note: the SiriusXM Radio
10
does not include
the letters
I,
0,
S
or
F.
In the USA, you can activate online or by
calling SiriusXM Listener care:
• Visit www.siriusxm.com/activatenow
• Call SiriusXM Listener Care at 1-866-635-
2349
For Canadian Subscriptions, please contact:
• Visit www.siriusxm.ca/activatexm
• Call
XM
customer Care
at
1-877-438-9677
As
part
of
the
activation
process,
the
SiriusXM satellites will send
an
activation
message to your tuner. When your radio
detects
that
the
tuner
has received the
activation message, your radio will display:
"Subscription Updated". Once subscribed,
you
can
tune to channels
in
your subscription
plan. Note, the activation process usually
takes 10 to
15
minutes, but may take
up
to
an
hour. Your radio will need
to
be
powered
on and receiving the SiriusXM signal to
receive the activation message.
Storing Channel Presets
1.
Press [BANDIASAC] to select the desired
band you want
to
store the preset
in.
There are 3 Satellite Radio Preset bands.
Each press
of
[BANDIASAC] changes the
band:
SXM1
->
SXM2
->
SXM3
->
SXM1
2.
Tune to the desired channel and then
press and
hold
one of the preset buttons (
1
through
6),
to
store the channel.
3.
Repeat the procedure to store up to 5
other channels
on
to
the same band.
Note:
• A total of
18
channels can
be
stored
in
the
preset memory, 6 channels for each band
(SXM1, SXM2 and SXM3).
Tuning Channels using Presets
1.
Press [BANDIASAC] to select the desired
band of Presets
you
wish
to
access.
2.
Press the preset button
(1
through
6)
that
has your desired Satellite Radio channel
stored
in
memory.
Category Browsing
1.
Press and hold [BANDIASAC] to activate
the Category Browsing mode.
2.
Rotate the
[VOLUME]
knob to select
desired category.

SiriusXM Satellite Radio Operations
3.
Press (
~
] or [
.,...
] to select desired
channel within the selected Category. You
can see channel name, channel number,
artist, title or content by pressing [DISP].
4.
Press
[VOLUME]
to
tune
to
selected
channel.
Note:
If no operation is performed for 10 seconds,
the Category Browsing mode is canceled.
Preset scan
Preset
scan receives
the
channels
stored
in preset memory in order. This function is
useful when searching for a desired channel
in
memory.
1.
Press
and
hold
the
( ..... ] key
or
press
and hold the [SCN/PS/AS] button on the
remote control.
2.
When a desired channel is tuned in, press
the [SCNIPS/AS] button again to continue
receiving that channel.
Channel scan (in current category)
Channel
scan
receives
the
channel
(in
current category) in order.
This
function is
useful when searching for a desired channel
in
current category.
1.
Press
the [..... ]
key
or press
the
[SCNIPSIAS]
button on the remote control.
2.
When a desired channel is tuned in, press
the [SCNIPS/AS] button again to continue
receiving that channel.
Note:
• Be careful not to press and hold the [SCNI
PS/AS]
button
for
1
second
or
longer,
otherwise
the
preset
scan
function
will
begin and the unit starts scanning presets.
iTunese song tagging
With iTunes song tagging, you can tag songs
you hear while listening to SiriusXM Satellite
Radio.
The
tagging information is saved in
your
radio until you
connect
your
iPod
or
iPhone and then the tagging information is
transferred to your iPod/iPhone. When your
iPod/iPhone
is
connected
to
iTunes,
you
will then be able to preview and purchase the
song that you heard while listening to SiriusXM
Satellite Radio.
Information on using the iTunes song tagging
feature is described below.
1.
A song may be tagged while listening to a
SiriusXM channel if the display shows the
"TAG"
icon.
2.
Press and hold the [VOLUME] knob while
the desired song is playing.
3.
When completed, "STORED TAG
X OF
64"
is displayed.
X means the number of tag stored.
Notes:
• During tagging, the
iPod/iPhone
takes
priority
to
save
the
tag
information.lf
no
iPod/iPhone
is
connected,
the
tag
information is saved to this unit.
• This unit can store up to
64
pieces of tag
information. When the memory of the unit is
full, "MEMORY FULL" may be displayed.
•
When
an
iPod/iPhone
that
doesn't
support the tagging function is connected,
''TRANSFER
FAIL"
may be displayed.
• If
there
is
stored
tag
information
on
the
unit, when an iPod/iPhone supporting the
tag function is connected,
the
stored tag
information will be transferred to the iPod/
iPhone automatically.
• If tag information already exists, "ALREADY
TAGGED" will be displayed when you try to
tag information again.
• Tagging may be canceled by changing the
frequency or channel.
• If a song
is
tagged and the remaining storage
volume
of
the
connected
iPod/iPhone
is
sufficient to hold the song's tag information, it
will be saved
on
the iPodliPhone.
Changing the Display
Text information, such
as
the channel name,
artist
name/feature,
song/program
title
and
content
is
available
with
each
SiriusXM
channel.
The
unit
can
display
this
text
information as explained below.
1.
In
SiriusXM mode, press [DISP] button.
Each
time
you
press
this
button,
the
display changes as shown below.
Band/Channel number/channel name =>
Artist Name => Song Title=> Content Info
=>
Category
Name
=>
Clock
=>
Band/
Channel number/channel name
• If there is no text information, nothing will
be displayed.
Parental Lock I Unlock
The SiriusXM Parental Control feature allows
you to control access to channels that you
consider inappropriate for younger listeners.
When enabled, the Parental Control feature
requires you to enter a password to tune into
the locked channels. Information on setting
up
the
password,
setting
up the
channels
to be locked, and the method to access the
locked channels is described below.
1.
To
set up the password, press and hold
[DISP] then release [DISP] and press
[..,...]
to scroll to "PARENTAL PASSWORD".
Press
[VOLUME]
knob
to
change
password. Enter old password, then enter
new password. To enter password, rotate
[VOLUME] knob to choose the numbers
(0-9) and press
[....-]or
[..,...]to
enter
the next number in the password. Once
all 4 numbers are entered, press and hold
[VOLUME]
knob
to
confirm
password.
(Original password is
"0000")
2.
To set up the channels to be locked, tune
to
the
channel
you
wish
to lock.
Press
and
hold
[DISP]
then
release
[DISP]
and press
[..,...]to
scroll to "LOCK
CH",
press [VOLUME] knob to confirm. Input
password as explained in step 1 and then
press and hold [VOLUME] knob to set the
locked channel. You will be asked to input
password. Enter
password
and
"LOCK"
will be displayed if it is successful.
3.
For
unlocking the locked channel, press
and
hold
[DISP],
and
press
[ ..,... ]
to
select "UNLOCKCH". Enter the password
and you can unlock the channel.
4.
To
access
the locked channels,
select
a
channel by "DIRECT SELECT'.
Press
and
hold
[MENU/-::::.1]
and
select
"DIRECT
SELECT"
by
pressing
the
[VOLUME] knob. Input the desired locked
channel
(you need to input 3 digits) and
input the password, then you can tune into
that locked channel.
CZ505
11

CD!MP3/WMA Operations
This unit can playback MP3/WMA
files
Note:
•
If
you
play
a
WMA
file with active
DRM
(Digital Rights Management), there will be
no audio.
To disable DRM
(Digital Rights Management)
When using Windows Media Player
9/1
0/11
,
click on Tool
->Options->
Copy Music tab,
then under Copy settings, unclick the Check
box for Copy project music. Then, reconstruct
files.
Personally constructed WMA files are used
at your own responsibility.
Precautions when creating MP31
WMA
file
Usable sampling rates and bit rates
1.
MP3: Sampling
rate
8 kHz-48 kHz, Bit rate
8 kbps-320 kbps
I
VBR
2.
WMA: Bit rate 8 kbps-320 kbps
File extensions
1.
Always
add
a
file
extension
".MP3",
".WMA" to MP3, WMA file
by
using single
byte letters. If you add a file extension
other than specified or forget to add the
file extension, the file cannot
be
played.
2.
Files without MP3/WMA data will not play.
The files will not play if
you
attempt to play
files without MP3/WMA data.
* When VBR files are played, the play time
display may differ the play location.
* When MP3/WMA files are played, a little
no
sound part
is
caused between tunes.
Logical format (File system)
1.
When writing MP3/WMA file
on
a CD-R
disc
or
CD-RW
disc,
please
select
"IS09660 level1, 2 or Joliet" or Apple ISO
as the writing software format. Normal
play may not be possible if the disc is
recorded
on
another format.
12
CZ505
2.
The folder name and file name can be
displayed as the title during MP3/WMA
play but the title must
be
within
32
single
byte alphabetical letters and numerals
(including
an
extension).
3.
Do
not affix a name
to
a file inside a folder
having the same name.
Folder structure
A
disc
with a
folder
having more than 8
hierarchical levels will
be
impossible.
Number of files or folders
1.
Up to 999 files can be recognized per
folder.
Up
to 99 folders can
be
recognized.
Up
to
3000 files can
be
played.
2.
Tracks are played
in
the order that they
were
recorded
onto
a
disc.
(Tracks
may not always
be
played
in
the order
displayed
on
the
PC.)
3.
Some noise may occur
depending
on
the type of encoder software used while
recording.
Eject function
Just pressing the (
~
) button, ejects the disc.
Notes:
•
If
you
force
a CD
into
before
auto
reloading, this can damage the
CD.
• If a CD (12 em) is
left
ejected
for 15
seconds, the
CD
is automatically reloaded
(Auto reload).
Listening to a disc already loaded
in the unit
Press the [
~I
SRC ]
button to select the CD/
MP3/WMA mode.
When
the
unit
enters the
CD/MP3/WMA
mode, play starts automatically.
Loading a CD
Insert
a CD
into
the
center
of
the
CD
SLOT with label facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD
SLOT.
•
If
the
CD
is
not inserted easily, there may
be another
CD
in
the mechanism or the
unit may require service. .
,
~
.-,-!
• Discs without the
,,·
:
;:-:~
;
or
~ill
:ii~
mark and
CO-ROMs cannot 6
'"
e'Piayed
T"
Gy
this unit.
• Some CD-R/CD-RW discs may not be
usable.
Pausing play
1.
Press the (
...
II
]
button
to
pause
play.
"PAUSE"
appears
in
the
display.
2.
To resume
CD
play, press
the
(
...
II]
button
again.
Displaying CD titles
This unit can display title data for MP3/WMA
disc.
When SCROLL
is
OFF, each time
you
press
the (
DISP]
button
to
change the title display.
MP3/WMA disc
FILE->FOLDER->TITLE->ARTIST->ALBUM-
>FILE->
...
Notes:
• If MP3/WMA disc has no
103
TAG,
"NO
TITLE"
appears
in
the display.
• Only ASCII characters can
be
displayed
in
Tags.
Selecting a track
Track-up
1.
Press the [ ..,.. ] button to move ahead to
the beginning of the next track.
2.
Each time
you
press the
[..,..]button,
the
track advances ahead to the beginning of
the next track.
3.
For MP3/WMA disc, press and hold the
(
6]
button
(1
sec.) to move ahead to
+
10
tracks.
Track-down
1.
Press the (
~]
button to move back to
the beginning of the current track.
2.
Press the [
~
] button twice to move
back to the beginning of the previous
track.
3.
For
MP3/WMA
disc,
press
and
hold
the
[ 5 ] button
(1
sec.)
to
move
back
to
-1
0
tracks.
Fast-forward/Fast-reverse
Fast-forward
Press and hold the [ ..,.. ] button .
Fast-reverse
Press and hold the [
~]
button .
* For MP3/WMA discs, it takes some time
until the start of searching and between
tracks.
In
addition, some errors may occur
in
the play time.
Folder Select
This function allows you to select a folder
containing MP3/WMA files and start playing
from the first track
in
the folder.
1.
Press the [
5 ]
or [
6 ]
button.
Press the (
6 ]
button to move the next
folder. Press the [
5 )
button to move the
previous folder.
2.
To select a track, press the
(~]or
[..,..]
button.
Search Function
1.
Press the (
MENU )
button
to
enter FOLD
SCH mode. Press the
[VOLUME]
button
to enter the folder list search mode.
2.
Turn
the
[VOLUME]
knob
to
select a
folder.
3.
Press the
(VOLUME]
button to enter the
file list search mode. And then the track
list appears in the display.
4.
Turn the
[VOLUME]
knob to select a track.
5.
Press the
[VOLUME]
knob to play.
* When
play
back
MP3
I WMA file,
this
function is performed
in
the current folder.

CDIMP3/WMA Operations
Top function
The top function resets the CD player to the
first track of the disc. Press ( 4 ) button to play
the first track (track No.
1)
on the disc.
* In case of MP3/WMA, the first track of the
current folder will be played.
Other various
play
functions
Scan play
This function allows you
to
locate and play
the first 1
0 seconds of all the tracks recorded
on a disc.
Press the [
1 )
button to perform scan play.
Repeat play
This function allows you to play the current
track
repeatedly
or
play
a
track
currently
being
played
in
the
MP3/WMA
folder
repeatedly.
CD:
1.
Press the [ 2 ) button once
or
more until
"RPT
ON"
appears on the LCD to perform
repeat play.
USB Operations
1.
Open
the
cover
of
the
USB
connector
to the right. Insert a USB cable (optional
CCA-755) into the USB connector. Insert a
USB device into the USB cable.
When connecting a USB device, the unit
will read the files automatically.
2.
To
remove the
USB
device, you
should
first
select
another
source
or
turn
off
the
power,
in
order
to
avoid
damaging
the
USB
device.
Then
remove
the
USB
device. Close the cover.
3.
Operation
is
the
same
as
MP3/WMA
operation.
2.
Press [ 2 ] button again to cancel repeat
playback,
"RPT OFF"
appears
on
the
LCD.
MP3/WMA:
1.
Press the [ 2 ] button once or more until
"TRACK RPT"
appears on the display to
perform repeat play, and
"RPT"
segment
lights on.
2.
For
MP3/WMA
files,
press
[ 2 ) button
repeatedly until
"FOLD
RPT'
appears on
the display for folder repeat
play.
3.
Press [
2 ]
button repeatedly until
"RPT
OFF"
appears on the display to cancel re-
peat playback, and
"RPT"
segment goes
off.
Random play
This function allows you to play all tracks
recorded on a disc
in
a random order.
Press the [
3 ]
button
to
perform random
play.
iPod
&
iPhone Operations
Connect
Connect
an
iPod
or
iPhone
to
the
USB
connector
via
accessory
cable
for
iPod/
iPhone.
When connecting a device, the unit will read
the files automatically. The track information
displays on the screen once playback start.
MENU
In
the S-CTRL
OFF
mode, press [
MENU
]
button,
then
press
the
[VOLUME]
knob
after appear the "
MUSIC
",
then rotate the
[VOLUME]
knob
to
select
PLAYLISTS
I
ARTISTS
I
ALBUMS
I
SONGS
I
GENRES
I
COMPOSERS,
and press the
[VOLUME]
knob to confirm.
Play/Pause
Press the [
.,.
..
] button on the panel
or
on the
remote control for play/pause.
Repeat
play
This function allows you to play the current
track
repeatedly
or
play
all
tracks
in
your
iPod/iPhone repeatedly.
1.
Press the [ 2 ] button once
or
more until
"RPT
ON"
appears on the LCD to perform
repeat play.
2.
Press [
2 ]
button repeatedly until
"RPT
OFF'
appears on the LCD to cancel repeat
playback.
Random
play
This
function
allows
you to
play
all
tracks
recorded on your iPod/iPhone in a random
order.
1.
Press [ 3 ] button repeatedly until
"ROM
ALBUM"
appears on the LCD for album
random play.
2.
Press the [ 3 ] button once or more until
"ROM
SONG"
appears
on
the
LCD
to
perform random play.
3.
Press [
3 ]
button repeatedly until
"ROM
OFF"
appears
on
the
LCD
to
cancel
random playback.
Setting iPod simple control mode
Use
this
function
if
you
wish
to
operate
through your iPod connected to this unit via
the USB cable.
*The
factory default setting
is"
OFF".
1.
Press and hold [
DISP ]
button to
enter
system setup.
2.
Press [
1+111]
or
(~]button
to select
"S-CTRL".
3.
Rotate the
[VOLUME]
knob to select
" ON "
or "
OFF " .
When using iPhone 5s with iOS
8.1
and
S-CTRL OFF, operations can still be made
through the iPod.
Notes:
• When performing iPod operations using
simple control mode, make the operations
slowly.
If
repetitive
operations
are
performed too quickly, unforeseen errors
may occur.
• When performing iPod operations using
simple
control
mode,
please
do
not
operate the iPod and the unit at the same
time, otherwise there may be unexpected
event happened.
•
Some
iPod
models
do
not
support
this
function.
Consult
your
nearest
Clarion
dealer or website to confirm which models
do not support this function.
iPod menu alphabet search
This
function
searches
the
subfolders
for
desired alphabetical letters.
1.
Press the
[MENU]
button to select the iPod
menu mode.
CZ505
13

iPod
& iPhone Operations
2.
Press
the
[VOLUME]
knob to
switch
between categories.
MUSIC: PLAYLISTS, ARTISTS, ALBUMS,
SONGS, GENRES, COMPOSERS
VIDEO: MOVIES, MUSIC VIDEOS,
TV SHOWS, VIDEO PADCASTS,
RENTALS
3.
Press the [VOLUME] knob. (The contents
of
the category
are
displayed.)
4.
Press
and
hold the [DISP] button
(1
sec.)
.
5.
Rotate the [VOLUME] knob
to
select the
desired letter to search.
6.
Press the
[DISP]
button again to next
perform search.
7.
Press
the
[VOLUME] knob
to
confirm.
Listening to Pandora®
You can stream Pandora internet radio by
connecting
an
iPhone/iPod
that
has the
Pandora mobile application already installed.
To start streaming, connect the iPod/iPhone
with Pandora already launched.
When the unit displays "PLEASE LAUNCH
Pandora
APPLICATION
ON
MOBILE
DEVICE"
in
Pandora mode, please launch the
Pandora Application by operating the iPod/
iPhone connected.
1.
Press the
[<!>
I
SAC]
button to enter the
Pandora
mode.
Selecting a station from
list
Press the
[MENU]
button and select "BY
DATE" or "A-Z" by rotating the [VOLUME]
knob and press the [VOLUME]
knob.
•
BY
DATE:
List
in
an
created date order
• A-Z: List
in
an
alphabetical order
Go
to
next station
or
previous
station(an
alphabetical order)
Press the [ 5 ] button
on
the panel to go to
previous station.
Press the [ 6 ] button
on
the panel or the
[BAND/TOP] button
on
the remote control to
go
to next station.
Thumbs up/down
Thumbs
up:
press the [ 2 ] button
on
the panel or the [APT]
14
CZ505
button
on
the remote control for thumbs
up.
Giving a track
the
thumbs
up
will
tell Pandora
to
play more tracks like that
one.
Thumbs down:
press
the
[ 1 ) button
on
the
panel
or
the
[SCN]
button
on
the remote control for thumbs down.
Giving a track the thumbs down
will
skip
to
the
next track (subject
to
skip
limit),
and
Pandora
will remember not to play that track
on
the
station again.
Notes:
• You can
personalize
your stations by
"thumbs
up"
or
"thumbs down".
•
If
you
give a track
the
thumbs down after
the skip limit has been exceeded, your
feedback
will
be
saved but the current track
will
continue
to
play.
BOOKMARK track
Short-press the [VOLUME] knob or the [ROM]
button
on
the remote control to Bookmark
current track.
Creating new stations
Short-press the [ 3 ] button
on
the panel to
create a new station
from
the current artist.
Long-press the [ 3 ] button
on
the panel to
create a new track.
Note:
If
the name
of
the station you wish
to
create
for a track title or
an
artist name
is
the same
as
the station name currently playing, "NOW
PLAY" appears
on
the display
and
the station
will not be created.
Skip
Press the [
.._...
] button
on
the panel or
on
the
remote control for the next tracks
in
station.
Note:
• Pandora limits the number
of
skips allowed
on their service. If you attempt to skip
tracks beyond the limit, "SKIP LIMIT" is
displayed.
Play/Pause
Press the [
.......
] button
on
the panel or
on
the
remote control for play
I
pause.
8/uetooth
Operations
The Bluetooth allows
you
to utilize your car's
built-in audio system for wireless mobile
phone or music handsfree communication.
Some Bluetooth mobile phones have the
audio features, and some portable audio
players
support
Bluetooth
feature. This
system
can play audio data stored in a
Bluetooth audio device. The audio system
with
Bluetooth
will
be
able
to
retrieve
phonebook contacts, received call, dialed
call, missed call, incoming calls, outgoing
call and listen
to
music.
Notes:
•
Do
not leave the microphone
of
Bluetooth
handsfree
in
the places with wind passing
such
as
air outlet
of
the air conditioner,
etc. This may cause a malfunction.
• If
leave
it in the
places
subjected
to
direct sun, high temperature can cause
distortion, discoloration which may result
in
a malfunction.
•
This
system
will
not
operate
or
may
operate improperly with some Bluetooth
audio players.
•
Clarion
cannot
guarantee
the
compatibility of
all
mobile phones together
with unit.
• Audio playback will be set to the same
volume level
as
set during telephone call.
This might cause problems, if extreme
volume level
is
set during telephone call.
Handsfree Operations Pairing
1.
Turn
on
Bluetooth function
of
your mobile
phone.
2.
Enter mobile phone's Bluetooth setup
menu.
3.
Search for new Bluetooth devices.
4.
Select CZ505 from the pairing list
on
the
mobile phone.
5.
Enter
"0000"
as
the
password
(The
password default setting
is"
0000
").
6.
After pairing successfully, the unit will
enter Bluetooth mode automatically,
and
"BLUETOOTH Mobile Phone name" will
appear
on
the
LCD.
7.
The unit
can
connect three units.
*
During
pairing,
depending
on type of
mobile phone, a six digit
PIN
code
will
be
shown
on
both the source unit's display
and
the mobile phone.
In
this case, please make sure that you
have the same
PIN
code
on
both devices,
and
then confirm
on
the mobile phone.
Making a
call
Operation from Bluetooth menu
Press the
[<!>
I SAC] button to switch the
source to "BLUETOOTH". Press
[MENU/'21]
button to select a way to make outgoing call:
• Dial Number
1.
Press the [MENU1'2l] button.
2.
Rotate the [VOLUME] knob to switch
"DIAL NUMBER".
3. Press the [VOLUME] knob to confirm the
selection.
4.
Rotate the [VOLUME] knob to select a
number, press the knob to confirm and
ready to input the next digit. Repeat the
above until
all
numbers inputted.
5. Press the [BANDIASAC] button
to
dial.
6.
Press [MENUI-:j]
to
terminate call.
• Dialled/Missed/ Received
You
can
search
any
Dialled/Missed/
Received.
1.
Rotate the
[VOLUME]
knob to select
"DIALLED", "MISSED", "RECEIVED".
2.
Press the [VOLUME] knob to enter the
selected call history.
3.
Rotate the [VOLUME] knob to scroll the
contacts.
4.
When the contact name or mobile phone
No. is displayed, press the [VOLUME]
knob
to
call the mobile phone
No.
of
that
contact.
* Press the
[MENU1'21)
button to end the
call.
• Call
from
Phonebook
You can search the contact name
in
the
phonebook
and
make call.

8/uetooth Operations
1. Rotate the
[VOLUME]
knob
to
select
"USER
PHONEBOOK" .
2.
Press the
[VOLUME]
knob to
enter
the
selected phonebook.
3.
Rotate the
[VOLUME]
knob to scroll the
contacts.
4.
The
phone
number
and
the
name
to
scroll display. When the contact name is
displayed, press the
[VOLUME]
knob to call
the mobile phone
No.
of that contact.
*
Press the
[MENU/~
button
to
end the call.
Notes:
• Some mobile phones may not be able to
transfer data of Phonebook.
• After
RESET,
please wait few minutes until
data transferred following to the Bluetooth
mode selection. During that,
"PHONEBOOK
UPDATING"
is
on
the display.
• Redial
You
can
call last dialed number.
Press the
[BANDIAS/lC]
button to
display
"REDIAL",
and push
[VOLUME]
knob to call
the last dialed number.
• Call Transfer
You can switch Handsfree call and mobile
phone call.
Press the
[BAND/ASAC]
button during call.
• Answering a call
You
can
answer
an
incoming
call
by
pressing the
[BAND/ASAC]
button.
*
Press the
[MENU/C!J)
button to reject an
incoming call.
Audio Streaming Operations
What is audio streaming?
Audio streaming
is
a technique for transferring
audio data such that it can
be
processed as
a steady and continuous stream. Users can
stream music from their external audio player
to their audio system wirelessly and listen to
the tracks through the car's speakers. Please
consult your nearest
Clarion
dealer for more
information
on
the product of wireless audio
streaming transmitter offered.
Please avoid operating your connected
mobile phone while audio streaming as
this may cause noise
or
sound choppy
on
the song playback.
Audio
streaming
may
or
may
not
resume after telephone interrupt as this
is dependent on mobile phone.
System
will
always
return
to
Radio
mode
if
audio
streaming
is
disconnected.
Note:
Be sure to read the
chapter
"Pairing"
before proceeding.
PlayI Pause a track
1.
Push the [
•n
]
button to pause audio
playback.
2.
To resume audio playback, push the
[
•n]
knob again.
Selecting a track
Track-up
1.
Press the [
..,.....
] button to move
to
the
beginning of the next track.
2.
Each time the [
..,.....]
button
is
pressed,
playback proceeds to another track
in
the advancing direction.
Track-down
1. Press the [
...
] button
to
move
to
the
beginning of the previous track.
2.
Each time the [
...
1
button
is
pressed,
playback proceeds
to
previous track
in
the reverse direction.
Note:
Playing order will depend on Bluetooth
audio
player.
When [
...
]
button
is
pressed, some A2DP devices will restart
the current track depends
on
the duration
of playback.
During
music
streaming
playback,
"A2DP"
will be shown on the display.
When
A2DP
and
HFP
device
is
disconnected,"BLUETOOTH
DISCONNECT"
will be shown on the display and return to
previously
selected
audio
source.
Some
Bluetooth audio players may not have play
I
pause synchronized with this unit. Please make
sure both device and main unit are
in
the same
play
I
pause status
in
BT MUSIC
mode.
ID3TAG display
During music streaming playback, for music
information that
is
longer than the display panel:
When
SCROLL
is
ON,
the
LCD
will display ID3
TAG
information cyclely, e.g: ALBUM->TITLE
->ARTIST.
..
When SCROLL
is
OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK,
but
user
can
adjust
it to
other
ID3
TAG
information
by
press
[DISP]
button.
AUX
Operations
The front AUX
terminals
of this system is
provided
to
allow playback of sounds and music
from external devices connected to this unit.
Press
[C!>
I SRC]
button
on
the panel
to
select
"AUX".
AUX
Input sensitivity setting
1.
Press
and
hold the
[DISP]
button
(1
sec.).
2.
Press [
~
] or [
~
] button
to
select
"AUX
SENS".
3.
If the output level of connected external audio
player
is
"HIGH",
rotate
[VOLUME]
knob
and
choose
"MID"
or
"LOW".
And if the output
level
is
"LOW',
choose
"MID"
or
"HIGH".
CZ505
15

6.
~BGUILI
StiGOIINB
~
GENERAL
Problem
Unit can not power on.
Unit can not power on.
Nothing happens
when buttons are
pressed.
Display is not
accurate.
No/low audio output.
Poor sound quality or
distortion.
Unit resets itself when
engine is off.
DISC Player
Sound skips or
is
noisy.
Sound is bad when
power
is
first turned
on.
16
CZ505
Cause
Unit fuse blown.
Car battery fuse blown.
The microprocessor has
malfunctioned due to noise, etc.
Improper audio output connection.
Volume set too low.
Speakers damaged.
Heavily biased volume balance.
Speaker wiring is
in
contact with
metal part of car.
Non-standard disc used.
Speaker power rating does not
match unit.
Wrong connections.
Speaker is shorted.
Incorrect connection between ACC
and Battery.
...
Measure
Replace with new fuse of correct rating.
Replace with new fuse of correct rating.
Turn
off the power and remove the DCP
Press the
[RESEn
button with a thin rod.
Note:
When the
[RESEn
button is pressed, turn off
the ACC power.•
·When
the
[RESEn
button is pressed,
frequencies of radio stations, audio setting, etc.
stored in memory are cleared.
Check wiring and correct.
Increase volume level.
Replace speakers.
Adjust the channel balance to center position.
Insulate all speaker wiring connections.
Use a standard disc.
Replace speakers.
Check wiring and correct.
Check wiring and correct.
Check wiring and correct.
Remove the object inside the unit.
Clean the com act disc with a soft cloth.
Replace with a compact disc with no
scratches.
Let dry for about 1 hour with power on.
USB device
Problem
Cause
Measure
The USB device has been Reversing the connection direction of the USB
USB device cannot inserted with wrong direction. device, try it again.
be inserted. The USB connector is broken. Replace with a new USB device.
USB device is not The USB device is damaged. Disconnect the USB device and reconnect.
If
the
recognized. Connectors are loose. device is still not recognized, try replacing with a
different USB device.
No sound heard with No MP3/WMA file
is
stored in the
the display
"No
File"
USB device. Store these files properly
in
the USB device.
shown.
Sound skips or is MP3/WMA files are not encoded Use MP3/WMA files encoded properly.
noisy. properly.
Bluetooth
)'
-
.
..
.
···•··
··
~~
,,_)•
··•··.·.··
..
)
......
·
iei
tl
ure
.·i
.
....
""'
.
~
....
~
··
·
·.
·.·····''(
':•·
·
·,
Cannot pair the The device does not support the Use another device to connect.
Bluetooth enabled profiles required for the system.
device with the
The
Bluetooth
function
of
the
Refer to the user manual of the device for how to
audio system. device is not enabled. enable the function.
The audio quality The microphone is
not
correctly
Adjust the position of the microphone.
For example, stick the microphone onto the
is poor after positioned. dashboard where close to the driver.
connection with a Move the device
closer
to the audio system
or
Bluetooth-enabled
device. The Bluetooth reception is poor. remove any obstacle between the device and the
system.

SiriusXM Advisory Messages
I
••••se
Detcrlptlon
...
The radio has detected a fault with the SiriusXM antenna. The antenna cable may be
either disconnected or damaged.
Verify that the antenna cable is connected to the SiriusXM Connect Vehicle Tuner.
CHKANTENA
Inspect the antenna cable for damage and kinks. Replace the antenna if the cable
is damaged.
SiriusXM products are available at your local car audio retailer or online at www.shop.
siriusxm.com.
The radio
is
having difficulty communicating with the SiriusXM Connect Vehicle Tuner.
CHEKTUNER
The tuner may be disconnected
or
damaged.
Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the
radio.
The SiriusXM Connect Vehicle Tuner is having difficulty receiving the SiriusXM satellite
signal.
Verify that your vehicle is outdoors with a clear view of the sky.
Verify that the SiriusXM magnetic mount antenna
is
mounted on a metal surface on
NO SIGNAL the outside of the vehicle.
Move the SiriusXM antenna away from any obstructions. Inspect the antenna cable
for damage and kinks.
Consult the SiriusXM Connect Vehicle tuner installation manual for more information on
antenna installation. Replace the antenna if the cable
is
damaged. SiriusXM products
are available at your local car audio retailer
or
online at www.shop.siriusxm.com.
The radio has detected a change
in
your SiriusXM subscription status.
SUBSCRIPTION Press the rotary knob to clear the message.
UPDATED Visit www.siriusxm.com or call 866-635-2349
in
the U.S.A. or 877-438-9677
in
Canada
if you have auestions about your subscriotion.
The channel that you have requested is not a valid SiriusXM channel or the channel
CH UNAVAIL that you were listening to is no longer available. You may also see this message briefly
when first connecting a new SiriusXM Connect Vehicle tuner.
Visit www.siriusxm.com for more information about the SiriusXM channellineuo.
The channel that you have requested is Locked by the radio Parental Control feature.
CHANNEL LOCKED See Parental Lock/Unlock feature, page 10 for more information on the Parental
Control feature and how to access locked channels.
7.
ERROR
DISPLA
VS
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
ERROR 5 This
is
a failure of deck's mechanism. Consult your store of purchase.
If
an
error display other than the ones described above appears, press the
[RESET]
button.
If
the
problem persists, turn off the power and consult your store of purchase.
*
When the
[RESET]
button is pressed, frequencies of radio stations, audio setting, etc. stored
in
memory are cleared.
8.,
SPECIFICATIONS
FM Tuner
Frequency range: 87.
9-
107.9MHz
Usable sensitivity: 15dBf
Frequency response: 30Hz-15kHz
Stereo separation: 30dB(1 kHz)
Signal/noise ratio: >55dB
AM
Tuner
Frequency range: 530 -171OKHz
Usable sensitivity (S/N=20dB):
30dB~
CD Player
System: Disc digital audio system
Frequency response: 20Hz-20kHz
Signal/noise ratio: >94dB
Total harmonic distortion: Less than 0.1% (1kHz)
Channel separation: >60dB
MP3/WMA mode
MP3 sampling rate: 8 kHz to 48 kHz
MP3 bit rate: 8 kbps to 320 kbps
I
VBR
WMA bit rate: 8 kbps to 320 kbps
Logical format:
IS09660
level 1,2
Joliet file system
USB
Specification: USB 1.0/2.0
Playable audio format:
MP3(.mp3): MPEG 1/2/Audio Layer-3
WMA(.wma): Ver 7/8/9.1/9.2
Bluetooth
Specification: Bluetooth Ver.
2.1
+EDR
Profile: HFP (Hands-tree Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (AV Remote Control Profile)
PBAP (Phone Book Access Profile)
Send/Receive Sensitivity: Class 2
Audio Amplifier
Maximum power output:
200W
(SOW
X
4)
Speaker impedance:
40
(4 to 8
Q
allowable)
Input
Audio input sensitivity:
High: 320mV (at 1
V output)
Mid: 650mV (at 1
V output)
Low: 1.3V (at 1
V output)
(input impedance 1
0
kO
or
greater)
Aux-in level:
~2V
General
Power supply voltage:
14.4VDC (10.8 to 15.6V allowable),
negative ground
Pre-Amp output voltage:
4.0V (CD play mode: 1kHz,
OdB,
1
01<0
load)
Fuse: 15A
Dimensions of the Main Unit:
188mm Width x 58mm Height x 179mm Depth
7-2/S(width) x 2-7/25(Height) x ?(Depth)
Weight of the Main Unit: 2.641b.(1.20kg)
Dimensions of the Remote Control unit:
43mm Width x
11
mm Height x 113mm Depth
1-2/3(Width) x 2/S(Height) x 4-2/S(Depth)
Weight of the Remote Control Unit:
1.16oz. (36g) (including battery)
E
E
(])
,.._
II.
Note:
7"
178mm
6-2/3" 170mm
7-2/5"
188mm
E
E
C")
~
~
<h
.I
E
E
~
50mm
46mm
58mm
•
Specifications
and
design
are
subject
to
change
without
notice
for
further
improvement.
Power Output:
22W
RMS x 4
Channels
at
4Q
and 1% THD+N
Signal to Noise Ratio:
93dBA (reference: 1W into 4)
CZ505
17

9. INSTALLATION I WIRE
CONNECTION GUIDE
CONTENTS
1) Before Starting ...................................................................... 18
2) Package Contents................................................................. 18
3) General Cautions .................................................................. 18
4) Cautions on Installation......................................................... 18
5) Installing the Source Unit ...................................................... 18
6) Removing the Source Unit .................................................... 19
7) Wiring and Connections ........................................................20
8) Connecting the accessories ..................................................20
1) Before Starting
1. This set is exclusively for use with a negative
ground 12 V power supply.
2. Read these instructions carefully.
3. Be st,Jre to disconnect the battery ''terminal" before
starting. This is to prevent short circuits during
installation. (Figure
1)
2) Package Contents Figure 1
Battery
Source unit ..................................................1 Owner's manual........................................... 1
Front panel ..................................................1
Trim ring ......................................................1
Mounting bracket......................................... 1
L-key............................................................2
Power supply cable ..................................... 1
3) General Cautions
1. Do not open the case. There are no
user serviceable parts inside. If you
drop anything into the unit during
installation, consult your dealer or an
authorized Clarion service center.
18 CZ505
Warranty card.............................................. 1
Special screw (M2*5mm,front panel lock)........ 1
Screws M5x6 mm Double Sems .................4
Remote control unit ..................................... 1
Battery (CR2025)......................................... 1
2. Use a soft, dry cloth to clean the case.
Never use a rough cloth, thinner,
benzine,
or alcohol etc. For tough dirt,
apply a little cold or warm water to a
soft cloth and wipe off the dirt gently.
4) Cautions on Installation
1. Prepare all articles necessary for in-
stalling the source unit before starting.
2. Install the unit within 30° of the hori-
zontal plane. (Figure 2)
3. If you have to do any work on the car
body, such as drilling holes, consult
your car dealer beforehand.
4. Use the enclosed screws for installa-
Max 30"
Figure 2
5) Installing the Source Unit
tion.
Using other screws can cause dam-
age.
(Figure 3)
Chassis Chassis
t~~age
Max. 6 mm (M5 screw)
Figure 3
1. Place the mounting bracket into the instrument panel, use a screwdriver to bend
each stopper of the mounting bracket inward, then secure the stopper.
2. Wire as shown in Section 7).
3. Insert the source unit into the mounting bracket until it locks.
4. Take care of the top and bottom of the trim ring and mount it so that all the hooks
are locked.
Notes:
1. Some car models require special mounting kits for proper installation.
Consult your Clarion dealer for details.
2. Fasten the front stopper securely to prevent the source unit from coming loose.
• Console opening dimensions

Notes of installation
1.
Before installation, please make sure prop-
er connections are conducted and the unit
operates normally. Improper connection
may result
in
damage to the unit.
2.
Use only accessories designed and manu-
factured for this unit and other unauthorized
accessories may result
in
damage to the
unit.
3.
Before installation, please fasten all power
cables.
4.
DO NOT install the unit in the place where
close to hot area to prevent damage to
electrical components such as the laser
head.
5.
Install the unit horizontally. Installing the
unit more than 30 degree vertically may
result
in
worse performance.
6.
To prevent electric spark, connect the posi-
Screwdriver Dashboard
tive pole first and then the negative pole.
Unit Installation
Method A
1.
Insert mounting bracket into dash board,
choose appropriate mounting tab according
to the gap width, bending the mounting
tab outwards with a screwdriver to fix the
mounting bracket
in
place.
2. Slide the unit into the bracket until you hear
a click sound.
Mounting Bracket
• Remove CD mech lock-screw.
MethodS
M5x6
~
Mounting Frame
1.
Insert this unit directly to the opening of
the dashboard.
2.
Place
M5x6
cylindrical screw through the
holes of the mounting frame located inside
the opening to holes of the unit and fasten
the screws to left & right.
Trim ring installation
Attach the trim ring around the front panel.
Take care of the top and bottom of the trim
ring and mount it so that all the hooks
are locked.
6) Removing the Source Unit
Disassemble trim ring
1.
Push the trim ring to right and pull out the
right part.
2.
Push the trim ring to left and pull out the
left part.
Disassemble the unit
1.
Turn off the power.
2.
Remove the panel.
3.
Remove the trim ring.
4.
Insert the removal keys straight back until
they lock, then pull the unit out.
5.
Disconnect all the wires.
CZ505
19

7) Wiring and Connections
6 Channel Amplifier
(Red) Front Line out R
(Red) Rear Line out R
(Blue) Sub out 2
t
Front Line out L (White)
Rear Line out L(White)
Sub out 1(Blue)
SWI (Steering Wheel Interface)
.....__ __ _,. Bluetooth Microphone
Black
SiriusXM
20 CZ505
Refer to the right
f'"»>O< _________ ....,. __ ~
1 SiriusXM-Connect™ Vehicle Tuner to,
1 be connected: Sold separately
:, l ]
Front Right
Front Left
Rear Right
Rear Left
i±)White
8 White/Black
!±l Purple
8 Purple/Black
!±l Green
8 Green/Black
4-Speaker system
t
or
•
2-Speaker system
Front Right
Front Left
!±l Purple
X
Not used.
Insulate each wire
8) Connecting the accessories
• Connecting to the external amplifier
16-Pin Connector Extension Lead
(attached to the source unit)
Brown wire (Phone mute lead)
Connect to cellular phone mute lead.
Yellow wire (Memory back-up lead)
FUSE 15A Connect directly to battery
Red wire (Power lead)
------Accessory i±J12V
Blue/White wire (Amplifier turn-on lead)
Connect to remote turn-on lead of amplifier
Black wire (Ground lead)
Connect to ve icle chassis ground
Orange/White wire (Illumination lead)
Connect it to the
car power supply terminal
for illumination
Blue wire (Auto antenna lead)
Connect it to the
car power supply terminal
for antenna
External amplifiers can be connected to the 4 channel RCA output connections.
Ensure that the connectors are not grounded
or shorted to prevent damage to the
unit.