Clarion CC510 Quick start guide

Owner's & Installation manual
Mode d'emploi et manuel d'installation
Manual de instrucciones y de instalaci6n
CC510
Vehicle Rear Vision Color Camera
Camera couleur de recul pour vehicule
Camara en color de vision posterior
para vehiculos

Thank
you
for
purchasing
this
Clarion
product.
•
Please
read
this
owner's
manual
in
its
entirety
before
operating
this
equipment.
•
After
reading
this
manual,
be
sure
to
keep
it
in
a
handy
place
(e.g.,
glove
compartment).
•
Check
the
contents
of
the
enclosed
warranty
card
and
keep
it
carefully
with
this
manual.
Contents
1.
FEATURES
...............................................................................................................2
2.
PRECAUTIONS
.........................................................................................................
2
3.
SPECIFICATIONS
....................................................................................................3
Package
Contents
......................................................................................................4
4.
TROUBLESHOOTING
..............................................................................................4
5.
INSTALLATION
........................................................................................................5
Before
installation
.....................................................................................................5
Precautions
when
using
two-sided
tape
for
installation
.............................................5
Installing
the
camera
..................................................................................................6
6.
WIRING
.....................................................................................................................
6
1. FEATURES
•
High-performance
1/4"
color
CMOS
auto
iris
camera
•
Wide-angle
lens
allowing
150
degree
field
of
view
•
High-resolution
glass
lens
for
high
image
quality
•
Mirror-image
inversion
function
presents
optimum
conditions
for
confirming
rear
view
(same
right-left
orientation
as
seen
through
a
rear
view
mirror)
•
Small
size
and
weight
for
easy
installation
•
Distance
guide
lines
(red,
orange,
yellow,
green)
A
WARNING
Distance
guide
lines
(red,
orange,
yellow,
green)
on
camera
are
approximate
only.
Distance
may
vary
depending
on
vehicle
and
installation.
2.
PRECAUTIONS
INFORMATION FOR USERS:
CHANGES
OR
MODIFICATIONS
TO
THIS
PRODUCT
NOT
APPROVED
BY
THE
MANUFACTURER
WILL
VOID
THE
WARRANTY.
This
equipment
has
been
tested
and
found
to
comply
with
the
limits
for
a
Class
B
digital
device,
pursuant
to
Part
15
of
the
FCC
Rules.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference
in
a
residential
installation.
This
equipment
generates,
uses,
and
can
radiate
radio
frequency
energy
and,
if
not
installed
and
used
in
accordance
with
the
instructions,
may
cause
2
CC510
harmful
interference
to
radio
communication.
However,
there
is
no
guarantee
that
interference
will
not
occur
in
a
particular
installation.
If
this
equipment
does
cause
harmful
interference
to
radio
or
television
reception,
which
can
be
determined
by
turning
the
equipment
off
and
on,
the
user
is
encouraged
to
consult
the
dealer
or
an
experienced
radio!TV
technician
for
help.

A WARNING
• This device has been designed
exclusively for use with a vehicular
mounted rear-view system. It should
not
be used for other purposes.
• Disconnect the vehicle's negative(-)
terminal when installing wiring.
•
Do not attempt to disassemble or
modify this product.
•
In the event it is necessary to drill
holes in the vehicle for mounting,
confirm that the drill bit
or camera
wiring will not strike or interfere with
piping, gas tank, electrical wiring
or
other functional parts of the vehicle.
•
Do not rely solely on the monitor
image when reversing the vehicle.
The rear-view monitor is an auxiliary
device meant for confirming the
presence of obstacles to the rear of
the vehicle, and is limited in its range.
It should be used only in conjunction
with direct visual observations.
• Always reverse at low speeds.
The rear-view monitor produces a wide
angle image, with the result that
actual distances may be different than
they subjectively appear in the monitor.
• Do not use when the imaging surface
or other parts are malfunctioning.
• When installation and wiring are
completed, confirm that the vehicle's
horn, brake and warning lights, and
other electrical equipment function
properly as designed.
3. SPECIFICATIONS
A CAUTION
• Install only as directed in the
Installation Manual.
• Install accessory parts
as directed.
• When drilling holes in the vehicle for
installation
of wiring, always use
insulated grommets in the holes to
protect the wiring.
• If holes are drilled in the vehicle to
install the camera,
or when installing
wiring, use silicon sealant to seal any
gaps.
•
Do not damage or scar the camera
wiring.
• After completing the camera wiring,
use cable clamps
or insulation tape
to bundle the wiring together.
• The images produced from the rear-
view monitor are inverted right-left
in the same way as images seen
in the vehicle's rearview mirrors. The
image may differ depending on the
vehicle type.
•
Do not use high-pressure car
washing devices around the camera.
The camera is a high-precision
instrument and should not be subjected
to high-pressure water stream impacts.
• Periodically check the tightness of
the installation screws and retighten
if necessary.
Power source/voltage: DC 12.0V (1 0.8 - 15.6V)
Power consumption: Max: 11 OmA or less
Image sensor: 1/4" Color CCD sensor
Angle of view: 150 degrees (horizontal), 90 degrees (vertical)
Minimum subject illumination: 0.5 lux (at 50 IRE)
Ingress Protection: IP67
SN ratio: 36 dB (AGC ON) or better
Weight: 0.423 ounces (0.0265 pounds)
Dimensions: 23 (W) x 23 (H) x 22 (D) mm
Note: Specifications and design are subject to change without notice
for further improvement.
CC510 3

Package contents
CD
Camera
with
attached
Mounting
Bracket
(A)
(universal
mounting)
and
7.0
m
cable
.......... 1
®
Mounting
bracket
(B)
(for
use
with
CAU001)
.....
1
®
Pan
head
screw
M3
x 4
with
washers
(for
use
with
Bracket
B)
...................................... 2
@
Pan
head
screw
M3
x
16
with
washers
(for
use
with
Bracket
B)
...................................... 2
@
Owner's
manual
& Installation
manual
.............. 1
4.
TROUBLESHOOTING
The
following
symptoms
are
not
malfunctions.
Before
having
the
unit
serviced,
check
the
following
points
once
more.
Symptom
Reason
Solution
No
image
Wiring
is
incomplete
or
Check
wiring
once
again
and
confirm
correct
disconnected.
cormections.
A
fuse
is
burned
out.
When
using
an
independent
power
supply
box,
check
the
fuse
and,
if
burned
out,
replace
with
a
new
one
with
the
same
capacity
(1A).
If
the
fuse
burns
out
repeatedly,
consult
your
dealer
or
nearest
Clarion
Service
Center.
Poor
image
The
lens
cover
is
soiled.
Wipe
lightly
with
a
damp
soft
cloth.
Do
not
rub
is
produce
harshly
with
dry
cloths
since
scratches
may
be
produced.
Sunlight
or
headlights
The
image
will
return
to
normal
when
the
light
from
vehicle
in
the
rear
are
striking
the
lens
is
removed.
shining
directly
in
camera.
The
environment
is
too
dark.
The
image
display
will
be
poor
at
night
or
dimlight.
The
image
will
return
to
normal
in
conditions
of
brighten
illumination.
4
CC510

5. INSTALLATION
Before installation
•
Before
installing
the
camera
or
its
wiring,
read
all
safety
warnings
and
be
sure
to
install
the
unit
correctly.
•
Before
installing
the
camera
permanently,
use
adhesive
tape
to
mount
the
camera
in
its
proposed
position,
then
check
the
image
in
the
monitor
to
confirm
proper
display
before
fixing
the
camera
in
its
final
position.
A
WARNING
•
Disconnect
the
battery's
negative(-)
terminal
installing
wiring.
Precautions when using
two-sided tape for installation
•
Do
not
install
on
glass
or
body
surfaces
treated
with
fluorinated
resins
or
other
water-repellent
treatments.
•
Do
not
install
within
the
sweep
of
a
rear
window
wiper,
or
near
the
window
washer's
nozzle.
•
Abide
by
the
following
rules
in
order
to
prevent
lowering
of
the
installation
tape's
adhesion:
•
As
far
as
possible,
install
on
a
day
with
clear
weather.
•
Within
the
first
24
hours
after
installation,
do
not
expose
the
installation
to
moisture
(water,
rain,
mist,
snow,
etc.),
or
subject
the
installation
to
strong
forces
or
impacts.
•
When
installation
must
be
performed
under
conditions
of
low
ambient
temperature
(20°C
or
below),
use
a
hair
dryer
to
warm
the
surface
of
the
bracket
where
the
2-sided
tape
is
to
be
applied.
•
Do
not
touch
the
bracket-mounting
surface's
2-sided
tape,
and
do
not
attempt
to
move
or
reset
the
tape
after
initial
application.
Notes:
•
Before
removing
the
protective
paper
on
the
bracket,
place
it
in
the
proposed
position
on
the
vehicle
and
confirm
that
the
surfaces
match
properly
without
gaps.
•
When
using
screws
to
install
the
bracket,
use
the
right-left
screw
holes
provided
on
bracket
A.
CC510 5

Installing the camera
Option 1: Peel of double-sided tape backing from
bracket (A) and place camera in suitable location.
·Adjust camera angle by using adjustment screw.
Option 2: Installing the camera with CAU001
please use bracket B.
*CAU001 not included.
AC.AUTION
• When adjusting the camera
position, do not allow the camera
cable to be excessively stretched or
loose.
Option 1
Mounting
bracket A
• Periodically check the tightness of
the installation screws and retighten
if necessary.
Option 2
6. WIRING
for CA UOO 1 only
Bracket
from CAU001
Mounting
bracket B
1. Lead the camera cable into the vehicle and align it along the vehicle weather stripping.
Use cable holders as necessary to fix the wires in place to prevent from being pinched
in hinges or dampers.
2. Fix the cable with adequate looseness in this area to prevent it from being stretched or
pinched in the hinge when the rear gate is opened and closed.
6 CC510
Connect to + 12V
Switched Accessory
(Red Wire)
Connect to
~=a:::(C Chassis Ground
(Black Wire)

12/2012
Clarion Corporation of America
All Rights Reserved. Copyright© 2012 Clarion Corporation of America
Printed
in China I lmprime au Chine I lmpreso en China
CC510