Clarity WakeAssure+ User manual

©Clarity products are manufactured by Clarity
Products LLC
4295 Cromwell Rd Ste 309 Chattanooga, TN 37421
[phone]
website: www.clarityproducts.com

E
N
G
L
I
S
H
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S
Alar m Clock
User Guide
Rev01
WakeAssure+

Table Of Contents
Safety Instructions . . . . . . . . . . . . . . . . . . .3
Function Identification . . . . . . . . . . . . . . . .5
How to set the time and Alarm. . . . . . .6
How to turn off the alarm . . . . . . . . . . .. . .6
Features and Modes . . . . . . . . . . .. . . . . . .7
Battery Backup . . . . . . . . . . . . . . . . . . . . .8
Warranty and Service . . . . . . . . . . .. . . . . .9

E
N
G
L
I
S
H
Important Safety Instructions
When using your alarm clock, always
follow basic safety precautions to reduce
the risk of fire, electric shock, and injury
to persons, including the following:
1. Read and understand all Instructions.
Observe all warnings and other markings
on the product.
2. There may be a slight chance of
electric shock from lightning.
3. Do not use this product near water, or
when you are wet. For example, do not
use it in a wet basement or shower, or
next to a swimming pool, bathtub,
kitchen sink or laundry tub. Do not use
liquids or aerosol sprays for cleaning.
If the product comes in contact with
any liquids, unplug any line or power
cord immediately. Do not plug the
product back in until it has dried
thoroughly.
4. If this product does not operate
normally, you cannot resolve the
problem, or if the product is damaged,
refer to the Clarity Warranty. Do not
open this product except as may
CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE
HAZARD, REPLACE ONLY SAME TYPE 3A, 125V
FUSE
~
•
•
xxx3

be directed in this owner’s manual.
Opening this product or reassembling
it incorrectly may expose you to
hazardous voltages or other risks.
Opening this product automatically
voids the warranty.
5. Unplug this product from the wall
outlet and refer servicing to qualified
service personnel under the following
conditions:
A. When the power supply cord or
plug is damaged or frayed.
B. I
f liquid has been spilled on the
product.
C. If the product has been exposed to
rain or water.
D. If the product does not operate
normally by following the operating
instructions. Adjust only those
controls that are covered by the
operating instructions because
improper adjustment of other
controls may result in further
damage.
E. If the product has been dropped or
appears damaged.
F. If the product exhibits a distinct
change in performance.
SAVE THESE INSTRUCTIONS
4xxx

E
N
G
L
I
S
H
Alarm
Set
Clock Set
Hour Minute
Alarm
Mode
Selection
Volume
Control
Tone
Control
Dimmer
(High/Low)
Snooze / Reset
Function Identification
xxx5
Off Test

xx6
E
N
G
L
I
S
H
How to set the time and alarm
1. To set time : Press and hold the
“SET CLOCK” key, press the HOUR
key and the digit will increase
one by each press or you can
press and hold HOUR key then will
quickly get to the desired HOUR,
and repeat the same steps for
the MINUTE to set the minute.
2. To set alarm : Press and hold ”SET
ALARM” key, press “HOUR” and
“MINUTE” key to the correct
alarm time.
3. TEST KEY : Press the TEST key to
check the alarm mode, press
again to turn off the test feature.
How to turn off the alarm
1. When the alarm is on, you can
press the SNOOZE key to go in
SNOOZE mode, the clock will re-
alarm in 9 minutes, you can
continue this process 16 times. Or
you can press SNOOZE key for
three seconds to turn off the
alarm. The clock will re-alarm the
same time next day.

Features and Modes
Clock Alarm Modes:
Choose alarm mode you wish to be
awakened, moving the clock mode switch
to one of the following selections:
ALL: sound, bedshaker and lighted snooze
button
FLASH/SOUND: sound and lighted snooze
button
FLASH/BEDSHAKER: bedshaker and lighted
snooze button
BEDSHAKER/SOUND: bedshaker and sound
FLASH: only lighted
BEDSHAKER: only bedshaker
OFF: No Alarm
Ringer Model:
ALL: sound, bedshaker and lighted snooze
button
FLASH/SOUND: sound and lighted snooze
button
FLASH/BEDSHAKER: bedshaker and lighted
snooze button
BEDSHAKER/SOUND: bedshaker and sound
FLASH: only lighted
BEDSHAKER: only bedshaker
OFF: No Alarm
DIMMER HIGH/LOW: The dimmer switch, can
choose the brightness of the display.
BEDSHAKER JACK: Use this jack for
bedshaker connecting
Volume: Set the volume of the alarm sound
Tone: Set the tone of the alarm sound
9 V DC : this jack is for the switching power
use.
7

E
N
G
L
I
S
H
xx8
Battery Backup
A 9-volt battery can be installed to
retain time and the programming of
the alarm settings in case of a
power outage. When the power
comes back on, the clock’s
previous time and alarm settings will
be still be operational. During a
power outage, the clock will not
display the current time and all its
alarm functions will not be
operational. Be sure to plug the unit
in before installing batteries. Please
check the battery condition after
one year and replace the old
battery – a leaking battery can
destroy your clock. Please observe
caution when handling electrical
appliances.

Warranty and Service
Clarity Products warrants the
WakeAssure+ Alarm Clock against any
defect in materials or workmanship for
the period of one year from the date of
purchase.
If your Clarity product is defective and
returned within 30 days of the date of
purchase, your WakeAssure+ Alarm
Clock dealer will replace it at no
charge.
If returned after 30 days but within one
year, we will repair or replace it at no
charge. In the repair of your
WakeAssure+ Alarm Clock, we may use
new or reconditioned replacement
parts. If we elect to replace your
WakeAssure+ Alarm Clock, we may
replace it with a new or reconditioned
product of the same or similar design.
Repair or replacement will be
warranted for either 90 days or the
remaining time on the original warranty
period, whichever is longer. When in
need of warranty repair, please call our
customer service department at (800)
426-3738 (voice). They will help you
process your return shipment. You must
prepay all shipping costs.
Implied warranties, including those of
fitness for a particular purpose and
99

E
N
G
L
I
S
H
xxx
10
merchantability (an unwritten warranty
that the product is fit for ordinary use),
are limited to one year from date of
purchase. We will not pay for loss of
time, inconvenience, loss of use of your
WakeAssure+ Alarm Clock, or property
damage caused by your WakeAssure+
Alarm Clock or its failure to work, or any
other incidental or consequential
damages. Some states do not allow
limitations on how long an implied
warranty lasts or the exclusion of
incidental or consequential damages,
so the above exclusions or limitations
may not apply to you.
We suggest you save the original
package materials in the event you
need to ship the WakeAssure+ Alarm
Clock. When shipping for warranty
repair, include your name, address,
phone number, proof of date of
purchase and a description of the
problem. After repairing the product,
we will ship it back to you at no cost
within the United States.
This warranty does not cover defects
resulting from accidents, damage while
in transit to our service location,
alterations, unauthorized repair, failure
to follow instructions, misuse, use outside
the United States or Canada, fire, flood
and acts of God.