Clarke CBBT1 Instruction Manual

ORIGINAL INSTRUCTIONS DL0523 Rev 1
INSTRUCTIONS
OPERATION & MAINTENANCE
12V BLUETOOTH BATTERY MONITOR
MODEL NO: CBBT1
PART NO: 6260107

2
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or Servic[email protected]
INTRODUCTION
Thank you for purchasing this CLARKE product.
Before attempting to use this product, please read this manual
thoroughly and follow the instructions carefully. In doing so you will
ensure the safety of yourself and that of others around you, and you
can look forward to your purchase giving you long and satisfactory
service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt which
will be required as proof of purchase.
This guarantee is invalid if the product is found to have been abused
or tampered with in any way, or not used for the purpose for which it
was intended.
Faulty goods should be returned to their place of purchase, no
product can be returned to us without prior permission.
This guarantee does not effect your statutory rights.

3
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
SAFETY INSTRUCTIONS
1. Clarke International are not liable for any damages or
consequences resulting from:
• Connection and installation errors.
• Damage to the device due to mechanical influences or
voltage surges or any modification to the device.
• Any unauthorized manipulation to the product which would
lead to cancellation of the guarantee.
• Use of the device for purposes other than described in this
instruction manual.
• Any influence of fluids.
• Any 3rd party or unauthorised software.
2. DO NOT use the device in a moist or wet environment.
3. DO NOT use the device close to flammable materials.
4. DO NOT use the device in an explosive environment.
5. Make sure the device is always positioned in a safe place.
• The device must be placed out of reach of children.
•DO NOT expose the device to direct sunlight or other direct
heat source.
6. Store the monitor in a safe, dry place after use.
WARNING: HIGH VOLTAGES ARE PRESENT AT THE FOLLOWING
POINTS: - THE IGNITION COILS, DISTRIBUTOR CAP, IGNITION
CABLE, SPARK PLUGS.
CAUTION: PLEASE READ THESE INSTRUCTIONS AS WELL AS
THOSE IN YOUR VEHICLE HANDBOOK VERY CAREFULLY BEFORE
USING THE DEVICE, KEEP THEM IN A SAFE PLACE FOR FUTURE
REFERENCE.

4
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or Servic[email protected]
7. DO NOT try to use other cables with this product.
8. DO NOT open the case, there are no replaceable parts inside the
product.
9. If the product malfunctions, please consult your dealer.
10. Seek professional help if you are unsure about anything related to
the electrical system in your vehicle.
11. If the outer skin of the cable is damaged, it may cause a short
circuit. Stop using it immediately and contact your dealer.
PARTS IDENTIFICATION
1 Battery Monitoring Device 3 Negative (- / Black) Connector
2 Positive (+ / Red)
Connector
4 Adhesive Tape (Not Shown)

5
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
OPERATION
MAIN FUNCTION DESCRIPTION
1. Real-time display of battery power, temperature and voltage.
2. Automatically tests the starting and charging systems of the
vehicle.
3. Sends alarm notification if the battery is abnormal.
4. App supports multi-device connection, 4 devices can be
monitored at the same time.
5. Records the track, cost and driving habits of each trip which can
be exported to an Excel file.
6. Records the last known parking position automatically and
provides a car finder function through navigation. Please note that
this is not a live tracking function.
7. Stores historical data (voltage, charge percentage and
temperature) in the device for up to 30 days. Saves the data every
2 minutes.
8. Save unlimited historical data within the app.
INSTRUCTIONS
1. The input voltage range of this device is 6V - 20V, which is suitable
for 12V vehicle/yacht lead-acid & LiFePO4 batteries. Too high
input voltage may cause equipment damage.
2. In order to obtain accurate battery temperature, stick the device
on the battery case using the double sided tape provided.
Connect the Positive (+ / Red) connector to the Positive terminal
of the battery and the Negative (- / Black) connector to the
Negative terminal of the battery.
3. When installing the app, all permissions must be obtained to
access all of the devices functions. If permission fails, some
functions will not work.

6
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or Servic[email protected]
4. Some functions need to allow the app to self start and run in the
background. The app has been optimised for this and will not
consume more power.
MOBILE APPLICATION
1. Scan the above QR code for the application or go to Google Play
or Apple App Store and search Battery Monitor 6 or Bm6.
2. Download the Battery Monitor 6 (Bm6) application.
3. To connect to the device, turn on your mobile Bluetooth and be
within 10m of the vehicle battery/device.

7
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
4. Click the App icon, and run.
5. Allow the app to access location,
even when not using the app. If
not the device will not
automatically notify the user after
monitoring a problem.
6. Allow the app to receive
notifications, including the car
battery, cranking system,
charging system and problem
alerts. This will allow, when your
mobile is in Bluetooth range, to
receive information notifications
even if the app is not running.

8
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or Servic[email protected]
7. Register with either an E-mail or Google account and agree to
terms of service. Click the ‘+ Add Device’ button.

9
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
8. To add a new device, enter the serial number of the device (this
can be found on the side of the device) and device name (which
is optional).
NOTE: Fuel consumption and price can be added here or
added and changed in the settings page.
NOTE: The app can add/delete/manage up to 4 devices at
once.
NOTE: Each serial number can only be bound to one
account. If the serial number is listed in one account, it
must be deleted first before it can be used in another
account.

10
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or Servic[email protected]
APP HOME PAGE