Clas Ohlson KPSA0101-UK User manual

English
Ver. 201104
Original instructions
105 W Palm Sander
Art.no Model
18-3278 KPSA0101-UK

2

3
English
105 W Palm Sander
Art.no 18-3278 Model KPSA0101-UK
Please read theentire instruction manual before using theproduct and save it for future
reference. Wereserve theright for any errors in text or images and any necessary
changes made to technical data. Ifyou have any questions regarding technical problems
please contact our customer services.
General Safety Instructions
Warning! Readall theinstructions. Failureto comply with thefollowing instructions
can lead to electric shocks, fires and/or serious injury. Theterm “power tool” in
thewarning text below refers to your handheld mains operated or battery operated tool.
SAVE THESE INSTRUCTIONS.
1. Thework area
a) Keep thework area clean and well illuminated. Clutteredand poorly lit areas invite
accidents.
b) Do not use power tools in explosive environments, e.g. near to flammable liquids,
gases or dust. Powertools generate sparks that can easily ignite dust or fumes.
c) Keep children and other bystanders away from thearea where you are using
thepower tool. Distractions can cause you to lose your concentration and control.
2. Electricalsafety
a) The power tool’s plug must fit correctly into thewall socket. Nevermodify
theplug in any way. Neveruse an adaptor together with earthed power tools.
Unmodifiedplugs and suitable wall sockets decrease therisk of electric shock.
b) Avoid physical contact with earthed objects, such as pipes, radiators, ovens or
refrigerators. Thereis an increased risk of receiving an electrical shock if your body
is earthed.
c) Do not expose thepower tool to rain or other wet conditions. Ifwater gets inside
apower tool it increases therisk of electric shock.
d) Do not abuse themains lead. Neveruse thelead to carry thetool or pull theplug
from thewall socket. Keepthe lead away from heat, oil, sharp edges and movable
parts. Damagedor tangled leads increase therisk of electric shock.
e) When using power tools outdoors, use an extension lead that is suitable for this
purpose. Useof an extension lead designed for outdoor use decreases therisk
for electric shock.

4
English
3. Personalsafety
a) Pay attention to what you are doing and use common sense when using
power tools. Neveruse power tools if you are tired or under theinfluence of drugs,
alcohol or medication. Onemoment of inattention while using apower tool may
result in serious injury.
b) Wear protective clothing. Alwayswear safety glasses. Usingprotective clothing
such as dust masks, non-slip safety shoes, helmets and ear defenders when
needed decreases therisk of injury.
c) Avoid accidental starts. Makesure that thepower switch is set to OFF before
plugging thetool into awall socket. Nevercarry apower tool with your finger on
thetrigger and never connect thepower tool to awall socket when theswitch is
set to ON, since it may result in injury.
d) Remove all service tools/keys before switching on thepower tool. A service tool
left on amoving part of thepower tool may result in injury.
e) Do not overreach. Makesure you stand steady and well balanced at all times.
Thiswill allow you to have more control in unexpected situations.
f) Wear suitable clothing. Donot wear loose-fitting clothing or jewellery. Keephair,
clothes and gloves away from moving parts. Loose-fitting clothes, jewellery or
long hair could become caught in moving parts.
g) If equipment for dust extraction or collecting is available make sure it is connected
and used properly. Usingtechnical aids may decrease dust related hazards.
4. Useand maintenance of power tools.
a) Do not force thepower tool. Usea power tool suitable for thework you are about
to perform. Theproper power tool will perform thetask better and safer if used
at thecorrect feed rate.
b) Never use thepower tool if thepower switch does not switch thetool on and
off properly. Allpower tools that cannot be controlled by thepower switch are
dangerous and must be repaired.
c) Unplug thelead from thewall socket before making any adjustments, changing
accessories or storing thepower tool. Theseprecautions reduce therisk of
thepower tool starting unexpectedly.
d) Store power tools that are not being used out of children’s reach. Donot allow
people who are unfamiliar with thetool or its functions to operate thetool.
Powertools can be dangerous if they fall into thehands of inexperienced users.
e) Maintaining power tools. Checkfor incorrect settings, parts that catch,
broken parts or anything else which might cause thepower tool to malfunction.
Ifsomething is damaged it must be repaired before use. Manyaccidents are
caused by poorly maintained power tools.
f) Keep tools sharp and clean. Properlymaintained cutting tools with sharp blades
are less likely to jam and are easier to control.
g) Use thepower tool, accessories and similar according to theinstructions and
in an appropriate way suitable for thetype of power tool used. Alsotake into
consideration your work environment and thetype of work to be done.

5
English
23
1
4
Using thepower tool for apurpose other than that for which it is intended could result
in adangerous situation.
5. Service
Repairs and service should only be performed by qualified tradesmen, and only with
original spare parts. Thisguarantees that thesafety of thepower tool is maintained.
Safety instructions specific to sanders
• Wear adust mask whenever sanding and adust extractor connected to
themachine should also be used wherever possible.
• Extra caution should be taken when sanding leaded paint, wood, metal or other
materials which produce toxic dust. Makesure any bystanders in thework area
are well protected.
• Bear in mind that wood dust can be highly flammable and easily ignitable.
Product safety symbols
Read theentire instruction manual.
Always use ear defenders, respiratory protection
and safety glasses or avisor.
Product description
1. Sandingpad
2. [On/off] switch
3. Dustextractor adaptor
4. Dustextractor connection

6
English
Operation
This machine is designed for sanding and polishing wood, dry spackle, painted and
lacquered surfaces. Makesure that thesurfaces you plan to sand/polish are dry.
1. Standsteady and balanced, holding thesander in afirm grip.
2. Pressdown [I] on theon/off switch to turn thesander on.
3. Letthe sander come up to speed before starting to sand.
4. Turnoff thesander by pressing down [0] on theon/off switch.
Changing sanding sheets
1. Unplugthe sander from thepower outlet before changing sanding sheets.
2. Removethe old sanding sheet and replace it with anew one.
Care and maintenance
• Always keep themotor’s ventilation openings free of dust and debris.
• Clean themachine regularly using alightly moistened cloth.
Donot use abrasive cleaning agents or solvents.
Disposal
Follow local ordinances when disposing of this product.
If you are unsure how to proceed, contact your local authority.
Specifications
Rated voltage 230 V AC, 50 Hz
Rated power 105 W
No-load speed 20000 rpm
Sanding sheet 140 x 140 x 80 mm
Approx. weight 0,9 kg
Sound pressure (LpA) 72 dB (A)
Uncertainty K 3 dB
Sound power (LwA) 83 dB (A)
Uncertainty K 3 dB
Vibration 16,468 m/s²
Uncertainty K 1.5 m/s²

7
Declaration of Conformity
Försäkran om överrenstämmelse
Samsvarerklæring
Vakuutus yhdenmukaisuudesta
CLAS OHLSON AB
SE-793 85 INSJÖN, SWEDEN
Declares that this product complies with the requirements of the following directives and standards
Intygar att denna produkt överensstämmer med kraven i följande direktiv och standarder
Bekrefter at dette produktet er i samsvar med følgende direktiver og standarder
Vakuuttaa, että tämä tuote täyttää seuraavien direktiivien ja standardien vaatimukset
ELECTRIC SANDER
18-3278
KPSA0101-UK
Machinery directive
2006/42/EC
EMC directive
2004/108/EC
Low Voltage directive
2006/95/EC
EN 60745-1:2009
EN 60745-2-4:2009
EN 55014-1:2006
EN 55014-2/A1:2001
EN 61000-3-2:2006
EN 61000-3-3/A2:2005
EC type certificate, no. M6080644390348
Issued by the following notified body:
Utfärdats av följande anmälda organ:
Utstedt av følgende teknisk kontrollorgan:
Myöntänyt seuraava ilmoitettu laitos:
TüV Süd Product Service GmbH, Zertifizierstelle, Ridlerstrasse 65,
80339 München, Germany
Klas Balkow
President
Insjön, Sweden, 2011-04-18

Sverige
Kundtjänst Tel: [phone]
Fax: [phone]
E-post: [e-mail]
Internet www.clasohlson.se
Post Clas Ohlson AB, 793 85 INSJÖN
Norge
Kundesenter Tlf.: 23 21 40 00
Faks: 23 21 40 80
E-post: [e-mail]
Internett www.clasohlson.no
Post Clas Ohlson AS, Postboks 485 Sentrum, 0105 OSLO
Suomi
Asiakaspalvelu Puh.: 020 111 2222
Sähköposti: [e-mail]
Internet www.clasohlson.fi
Osoite Clas Ohlson Oy, Annankatu 34–36 A, 00100 HELSINKI
Great Britain
For consumer contact, please visit
www.clasohlson.co.uk and click on
customer service.
Internet www.clasohlson.co.uk