Classic Brands Adjustable Comfort AFFORDAMATIC 2.0 User manual

ADJUSTABLE
COMFORT
AFFORDAMATIC 2.0
ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS
STEP 1: Carefully open the carton and remove
all boxes then lay out the top and the bottom
of the base as one unit as shown. Cut all zip
ties and remove.
STEP 2: To attach the corner bed legs, rotate
the end bolts into the holes in the corner
brackets.
STEP 3: Put remaining legs on the base and
tighten. When ready to flip the base over, make
sure you do not use the legs as leverage as they
may damage the legs and/or base.
STEP 4: Insert the mattress retainer bar into
the grommets as shown.
For customer service call 1-877-707-7533
or email [e-mail]
SYNCING ONE REMOTE:
SYNCING 2 TXL TO BE ONE KING :
Each base comes factory synced to its own remote.
If not synced follow these instructions:
Each base comes factory synced to its own remote.
Step 1:
Step 1:
Push the recoVer button on cord underneath the
bed, hold the “head down” button and the “foot up”
button on the remote at the same time for 10 seconds.
Press and hold the “head down” button and
the “foot up” button on the remote and push the
recover button on cord underneath the second
bed at the same time for 10 seconds.
Step 2:
Step 3:
Once you hear a beep that will indicate that the
remote is synced.
Then both beds are synced and can be controlled
by the same remote.
Once you hear a beep that will indicate that the
remote is synced.
Step 2:
Ver.201812001