Classic Exhibits euro lt LT-114 User manual

www.classicexhibits.com
866.652.2100
© 2010
Order #xxxxx - LT-114 -
Page 1 of 1
Pedestal Assembly
Item Number
1
2
3
4
5
6
7
8
Description
38”h End Connector
19”w x 38”h Flat Panel
38”h 90° Connector
19”w x 38”h Flat Panel
19”w x 38”h Flat Panel
38”h 90° Connector
19”w x 38”h Flat Panel
38”h End Connector
1
2
3456
7
8
Steps:
Connect panels together in numerical order
as shown in illustrations.
Set counter atop assembled pedestal.
Plan View
41.6120"
22.6120"
Counter Top
Internal Shelf
Velcro shelf support
to inside of assembled
base as indicated.

www.classicexhibits.com
866.652.2100
© 2010
Order #xxxxx - LT-114 -
Page 2 of 1
General Insructions
Euro LT Hybrids General Setup Instructions
Using Your Setup Instructions
The Euro LT Hybrids Setup Instructions are created specifically for your configuration.
They are laid out sequentially in levels, including exploded views, and a logical series of
detailed steps to assemble the main structure and components. We encourage you to study
the instructions before attempting to assemble your exhibit.
Cleaning and Packing Your Display
1) When cleaning laminate countertops or panels use mild cleansers and a soft material such
as cotton.
2) Keep all display components away from extreme heat and long exposure to sunlight to avoid
warping and fading.
3) Retain all packing material. It will make re-packing much easier and will reduce the likelihood of
shipping damage.
Cut Away View Of
Slide Clips
,EFT0ANEL
2IGHT0ANEL
Left Hand
Grasps Panel
Firmly
With Right Hand Thumb
Close to Seam
Squeeze,
Push Forward,
And Lift
Color Coded Clip
w/ assembly number
Panel Lock
When Required
Black Clip
is bottom of
panel
Connector Top View of Panel with Locks
Example of Connection
Color Coded Clip
w/ assembly number
Panel Lock
When Required
Each component has 2 clips,
the lower clip is ALWAYS
black. .
Components connect together
by aligning them and sliding
downward connecting clips
together.
Configurations are assembled
from left to right, usually starting
with #1 and following the
numbered sequence.
The first level of components contains panel locks
that are located at the top of the panel for extra
stability and a seamless connection. When dis-
assembling panels, twist top connection slightly
and lift right panel upward.
Level 1 = Blue
Level 2 = Red
Level 3 = Green
Level 4 = Black
Top View of Panel with Locks
Color Code
The top clip is color
coded to distinguish the
level. The color coded clip
also contains the numbered
label

www.classicexhibits.com
866.652.2100
© 2010
Order #xxxxx - LT-114 -
Page 3 of 1
6
9
Setup Hardware Box
Counter Top
Internal Shelf
4
8
7
5
23
1
10
Case
Case Packing Instruction