Clean Logix PBX-CAB-DOS User manual

USER
MANUAL
English (Original Instrucons)
Updated: 03/25/21
MODEL:
PBX-CAB-DOS
Dosing Pump Cabinet

PBX Dosing Cabinet Manual Page 2 of 13 Updated: 03/25/21
USER MANUAL: PBX-CAB-DOS
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
!
WARNING:
1. Avoid contact of chemicals with skin and eyes. If contact occurs, see
MSDS sheet for further rst aid measures.
2. Follow safety instrucons of chemical manufacturer (MSDS).
3. Always follow plant and OSHA guidelines about the use of equipment.
4. Disconnect pump before servicing equipment.
5. Always follow safety precauons and obey warning labels. Failure to do
so could result in injury or death.
Table of Contents
Overview ...................................................................................................................
Mounng Cabinet
Wall Mounng ....................................................................................................
Rail Mounng .....................................................................................................
Installing Plumbing
Industrial Plumbing Kit with Dosatron..................................................................
Industrial Plumbing Kit with MixRite 3.5.............................................................
Maintenance .............................................................................................................
Parts Callout. .............................................................................................................
03
04
05
06
08
10
11
PROTECT THE ENVIRONMENT
Please dispose of packaging materials, old machine components, and hazardous uids
in an environmentally safe way according to local waste disposal regulaons.
Always remember to recycle.

PBX Dosing Cabinet Manual Page 3 of 13 Updated: 03/25/21
USER MANUAL: PBX-CAB-DOS
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
The Pump Cabinet by Clean Logix provides users a safe and eecve way to contain a variety of dosing pumps
to protect users against spills, sprays and other unexpected occurrences that could be hazardous.
Overview
NOTE: Shown with Rail Support aached for PBX-RAIL integraon.

PBX Dosing Cabinet Manual Page 4 of 13 Updated: 03/25/21
USER MANUAL: PBX-CAB-DOS
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Fig. 3.1: Removing rail supports
The Dosing Pump Cabinet by Clean Logix can be
mounted in 2 dierent ways depending on user
preference. When determining mounng locaon and
posion consider the following:
• Pump accessibility
• Distance from containers and equipment
• Distance from objects/obstacles that may
impair hose funconality
Keyhole Mounng
1. Remove the rail supports on either side of the
cabinet [Figure 3.1]
2. Using appropriate hardware (not included) drill
and secure the anchor points for the 6 keyholes
3. Mount the cabinet and ghten into place.
Mounng Requirements

PBX Dosing Cabinet Manual Page 5 of 13 Updated: 03/25/21
USER MANUAL: PBX-CAB-DOS
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Rail Mounng
1. To install the Pump Cabinet on a wall mounted rail
(sold separately) aach the rail to the wall using
appropriate hardware (not included).
2. Aach the Pump Cabinet to the rail by hooking
the rail supports to the top edge of the rail at a
slight angle. [Figure 4.1].
3. Let the cabinet rotate back onto the rail and rest
against the wall to secure in place [Figure 4.2].
4. Posion the Pump Cabinet on the rail with
clearance for hose roung and addional pump
cabinets or boxes.
Fig. 4.1: Mounng Cabinet to rail (shown with PBX-RAIL-M)
Fig. 4.2: PBX Cabinet aached to rail
Mounng Requirements (connued)

PBX Dosing Cabinet Manual Page 6 of 13 Updated: 03/25/21
USER MANUAL: PBX-CAB-DOS
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
The PBX Cabinet has been designed to secure a variety of 14GPM dosing pumps, such as Dosatron® D14MZ
and Dema® MixRite 3.5 pumps.
Review the following secons for suggested installaon methods for the pump to be installed.
Industrial Plumbing Kit with Dosatron
#PBX-CAB-DOS-IPK34
Installing Pumps
NOTE: It is recommended to install any hose
barbs or uid ngs prior to pump mounng.

PBX Dosing Cabinet Manual Page 7 of 13 Updated: 03/25/21
USER MANUAL: PBX-CAB-DOS
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Industrial Plumbing Kit with Dosatron and Mixing Chamber
#PBX-CAB-DOS-IPK34-MC
Installing Pumps

PBX Dosing Cabinet Manual Page 8 of 13 Updated: 03/25/21
USER MANUAL: PBX-CAB-DOS
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Industrial Plumbing Kit with MixRite 3.5
Due to their dimensional dierences, Demo® MixRite 3.5 dosing pumps will require addional installaon
procedures to be properly mounted. Plasc spacers have been included with the cabinet to allow for this.
1. Remove 2x t-nuts from the back of the cabinet and re-install in lower, secondary holes as shown below.
Installing Pumps
DOSATRON
MOUNTING HOLES
MIXRITE 3.5
MOUNTING HOLES

PBX Dosing Cabinet Manual Page 9 of 13 Updated: 03/25/21
USER MANUAL: PBX-CAB-DOS
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Installing Pumps (cont.)
Industrial Plumbing Kit with MixRite 3.5 (cont.)
2. Remove pipe-tee clip and install spacer adapter as
shown.
3. Install plumbing conguraon as outlined below
4. If mixing chamber is included use the included
spacer adapter to maintain proper clearance oset.

PBX Dosing Cabinet Manual Page 10 of 13 Updated: 03/25/21
USER MANUAL: PBX-CAB-DOS
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
!
WARNING:
Ensure pump is inacve and depressurized
before servicing to avoid injury.
• Check the enclosure for leaks and/or liquid
accumulaon.
• Check and adjust plumbing as necessary to
prevent and protect against leaks, spills and other
plumbing issues.
• Ensure door is latched closed at all mes while
pump is acve.
• Check enclosure and pump mounng plate for
cracks or damage.
Maintenance Notes:
Please contact Clean Logix at:
(616)-438-9200 or [email protected]
iMore Informaon

PBX Dosing Cabinet Manual Page 11 of 13 Updated: 03/25/21
USER MANUAL: PBX-CAB-DOS
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Parts Callout

PBX Dosing Cabinet Manual Page 12 of 13 Updated: 03/25/21
USER MANUAL: PBX-CAB-DOS
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Parts Callout
without mixing
chamber
mixing
chamber

PBX Dosing Cabinet Manual Page 13 of 13 Updated: 03/25/21
USER MANUAL: PBX-CAB-DOS
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Parts Callout
Part Descripon
C11-1 DOSING CABINET DOOR
C11-10 DOSING CABINET FILTER SPACER
C11-11 DOSING PANEL MIXRITE SPACER MXING CHAMBER
BRACKET
C11-12 DOSING PANEL MIXRITE SPACER PIPE TEE CLIP
C11-2 DOSING LEFT SIDE PLATE
C11-3 DOSING CABINET BACK PLATE
C11-4 DOSING CABINET RIGHT SIDE PLATE
C11-5 DOSING CABINET TOP PLATE
C11-6 DOSING CABINET BOTTOM PLATE
C11-7 DOSING CABINET RAIL SUPPORT
C11-8 DOSING PANEL PIPE TEE .75 CLIP SPACER
C11-9 DOSING PANEL PIPE TEE .75 CLIP
C12-1 DOSING CABINET WINDOW
F1032 BOLT HHC 1/4-20 x 3-1/2 SS
F1075 SCREW SELF TAP 10-16 x 1/2 SS TRUSS HD
F1081 BOLT HHC 1/4-20 X 3/4 SS
F1082 BOLT HHC 1/4-20 x 1 SS
F1155 SCREW SHARX 10 X 1-1/4 PAN HD 316SS
F1178 SCREW SHARX 10 X 1 PAN HD 316SS
F1190 NUT BRAD TEE 1/4-20 SS
Part Descripon
F1210 WASHER 1/4 316SS
F1221 WASHER SPLIT LOCK 1/4 316SS
F1223 SCREW SELF TAP #4 X 3/8 316SS
F1232 NUT WELD 1/4-20 x 5/16 NARROW-BASE 18-8 SS
M2061 FLOW RESTRICTOR, 3/4" NPT F-F, PP, 14GPM
MC-34 MIXING CHAMBER
P1393 CHECK VALVE 3/4"F X 3/4"F 0.3# HASTELLOY/VITON
P1403 PIPE ELBOW STREET 3/4" PP
P1416 PIPE HEX NIPPLE 3/4 POLY
P1422 PIPE REDUCER NIPPLE 3/4 x 1/2 POLY
P1503 PIPE TEE 3/4 POLY
P1644 PIPE NIPPLE 3/4 X 6 POLY
P1658 VALVE, BALL, MANUAL, 3/4" NPT F-F, PP
P1793 PRESSURE REGULATOR, WATER, 3/4' SS
P1809 PIPE UNION 3/4 INCH GRAY PVC
P2150 FILTER WATER 200-MICRON .75 PP, WITH MOUNTING
HOLES
P2152 VALVE, BALL, MANUAL, 1/2" FNPT, SS, STRAIGHT
HANDLE
Please contact Clean Logix at:
(616)-438-9200 or [email protected]
iMore Informaon