CleanDigital TPU411 User manual

TPU411
HDBaseT Extender
All Rights Reserved
Version: TPU411_2016V1.0
User Manual

HDBaseT Extender
Preface
Read this user manual carefully before using this product. Pictures shown in this manual
is for reference only, different model and specifications are subject to real product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till March 2016. Any changes of
functions and parameters since then will be informed separately. Please refer to the
dealers for the latest details.
All product function is valid till 2016-3-1.
Trademarks
Product model and logo are trademarks. Any other trademarks mentioned in this
manual are acknowledged as the properties of the trademark owner. No part of this
publication may be copied or reproduced without the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their expense will be required to take whatever measures may be
necessary to correct the interference
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

HDBaseT Extender
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
lUnpack the equipment carefully and save the original box and packing material for
possible future shipment
lFollow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
lDo not dismantle the housing or modify the module. It may result in electrical shock
or burn.
lUsing supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
lRefer all servicing to qualified service personnel.
lTo prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
lDo not put any heavy items on the extension cable in case of extrusion.
lDo not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
lInstall the device in a place with fine ventilation to avoid damage caused by
overheat.
lKeep the module away from liquids.
lSpillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
lDo not twist or pull by force ends of the optical cable. It can cause malfunction.
lDo not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
lUnplug the power cord when left unused for a long period of time.
lInformation on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

HDBaseT Extender
Table of Contents
1. Introduction ................................................................................................................. 1!
1.1 Introduction to TPU411...................................................................................... 1!
1.2 Features ............................................................................................................ 1!
1.3 Package Contents ............................................................................................. 1!
2. Panel Description........................................................................................................ 2!
2.1 TPU411T ........................................................................................................... 2!
2.2 TPU411R........................................................................................................... 3!
3. System Connection..................................................................................................... 5!
3.1 Usage Precautions ............................................................................................ 5!
3.2 System Diagram ................................................................................................ 5!
3.3 Connection Procedure....................................................................................... 5!
3.4 Application ......................................................................................................... 6!
3.5 Twisted Pair Cable Connection ......................................................................... 6!
4. Specification................................................................................................................ 7!
4.1 Supported Resolution ........................................................................................ 8!
5. Panel Drawing............................................................................................................. 9!
6. Troubleshooting & Maintenance ............................................................................... 10!
7. After-sales Service.................................................................................................... 11!

HDBaseT Extender
1
1. Introduction
1.1 Introduction to TPU411
TPU411 is a mini-size extender set consists of transmitter (TPU411T) and receiver
(TPU411R). HDBaseT technology is used to transmit high-resolution 1080p/ 4k signal
from transmitter to the receiver via a CAT5e/CAT6a cable at a distance of up to
70/40m.Moreover, TPU411 support CEC, bi-directional RS232&IR control, and
unidirectional PoH function.
1.2 Features
lSupport Full HD: Delivers high resolution image (1080p@60Hz@48
b/pixels/3D/4Kx2K).
lMaximum transmission distance is 70m for 1080p and 40m for 4Kx2K over single
CAT5e/CAT6a cable
lHigh Bandwidth: 10.2Gps.
lHDTV Compatible, use HDMI 1.4 and HDCP2.2 compliant.
lSupport CEC/IR/RS232 pass through.
lSupport PoH, the receiver can be powered by transmitter.
lBi-directional RS232/IR control.
lUse HDBaseT technology.
lLED indicators show work status.
Note: Please use a CAT5e cable with low impedance (Shielded twisted pair will be
better and should be well grounded)for good transmission effect.
1.3 Package Contents
Ø1 x Transmitter (TPU411T)
Ø1 x Receiver (TPU411R)
Ø4 x Mounting ears
Ø8 x Plastic cushions
Ø8 x Screws
Ø2 x Power adapter (DC 24V 1.25A)
Ø2 x RS232 cables
Ø1 x User manual
Notes: Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.

HDBaseT Extender
2
2. Panel Description
2.1 TPU411T
No.
Name
Description
①
LINK
HDBT Link status indicator:
ØOFF: No Link
ØGREEN:Link Successful
ØBlinking GREEN: Link abnormal
②
HDCP
HDCP compliant indicator
ØOFF: No HDMI traffic (no picture)
ØGREEN: Traffic with HDCP.
ØBlinking GREEN: Traffic without HDCP
③
Power
OFF: No power; RED: DC power present.
④
RS232
RS232 connector.
⑤
IR IN
Connect with 5V IR receiver (with carrier) to collect infrared signal,
work with far-end IR OUT port
⑥
IR OUT
Connect with 5V IR Emitter to send infrared signal, work with
far-end IR IN port
⑦
HDMI IN
Connect with HDMI source
⑧
HDBT OUT
Connect to the HDBT IN socket on the TPU411R via CAT5e/
TX
HDCPLINK
RS232
Tx Rx

HDBaseT Extender
3
CAT6a cable, support unidirectional PoH.
⑨
DC 24V
Connect with power supply
&Pictures shown in this manual are only for reference.
2.2 TPU411R
No.
Name
Description
①
LINK
HDBT Link status indicator:
ØOFF: No Link
ØGREEN:Link Successful
ØBlinking GREEN: Link abnormal
②
HDCP
HDCP compliant indicator
ØOFF: No HDMI traffic (no picture)
ØGREEN: Traffic with HDCP.
ØBlinking GREEN: Traffic without HDCP
③
Power
OFF: No power; RED: DC power present.
④
RS232
RS232 connector.
⑤
IR IN
Connect with 5V IR receiver (with carrier) to collect infrared signal,
work with far-end IR OUT port
⑥
IR OUT
Connect with 5V IR Emitter to send infrared signal, work with
far-end IR IN port
HDCPLINK
RS232
Tx Rx

HDBaseT Extender
4
⑦
HDMI OUT
Connect with HDMI display
⑧
HDBT IN
Connect to the HDBT OUT socket on TPU411T via CAT5e/ CAT6a
cable.
⑨
DC 24V
Connect with power supply (Not necessary if TPU411T connects
with power).
&Pictures shown in this manual are only for reference.

HDBaseT Extender
5
3. System Connection
3.1 Usage Precautions
1) System should be installed in a clean environment and has a prop temperature and
humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated and
safety.
3) All devices should be connected before power on.
4) Use shielded straight-thru CAT5e/CAT6a cable with TIA/EIA T568B terminations for
good transmission effect.
3.2 System Diagram
3.3 Connection Procedure
Step1. Connect HDMI source (such as Blue-ray DVD) to HDMI IN port of TPU411T with
HDMI cable.
Step2. Connect HDBT OUT port of TPU411T and HDBT IN port of TPU411R, with
single CAT5e/CAT6a cable.
Step3. Connect HDMI displayer (such as HDTV) to HDMI OUT port of TPU411R with
HDMI cable.
Step4. Both TPU411T and TPU411R have IR IN and OUT. When one end is used as an
IR receiver, the signal sent from the end can only be transmitted via the other
end.
TPU411R
DVD
HDMI
HDMI
INPUT
RS232
Controlpanel
Projector
IR Remote
TPU411T CAT5e

HDBaseT Extender
6
For example: When “IR IN” of TPU411T connects with an IR receiver, the IR
transmitter must connect to IR OUT of TPU411R.
Step5. Connect the RS232 port of the devices to be controlled and the TPU411R or the
TPU411T.
Step6. Connect with DC24V power adaptor(s) (One is enough if TPU411T is connected
with adapter as its PoH function).
3.4 Application
TPU411 has a good application in various occasions, such as computer realm,
monitoring, big screen displaying, meeting room, education and bank & securities
institution etc.
3.5 Twisted Pair Cable Connection
The twisted pair used in this extender MUST be a straight-through cable.
Notice: Cable connectors
MUST be metal one; the
shielded layer of cable
MUST be connected to the
connector’s metal shell, to
make a better transmission.
TIA/EIA T568A
TIA/EIA T568B
Pin
Cable color
Pin
Cable color
1
green white
1
orange white
2
green
2
orange
3
orange white
3
green white
4
blue
4
blue
5
blue white
5
blue white
6
orange
6
green
7
brown white
7
brown white
8
brown
8
brown
1st
Ground
4--5
1st
Ground
4--5
2nd
Ground
3--6
2nd
Ground
1--2
3rd
Group
1--2
3rd
Group
3--6
4th
Group
7--8
4th
Group
7--8

HDBaseT Extender
7
4. Specification
Model
Spec
TPU411T
TPU411R
Input
Input Signal
1 HDMI, 1 IR & 1 RS232
1 IR, 1 RJ-45 & 1 RS232
Input Connector
HDMI female, 3.5mm mini
jack, 3p captive screw
connector
3.5mm mini jack, RJ-45, 3p
captive screw connector
Audio
Digital audio, transmit
through HDMI audio
Digital audio, transmit
through HDMI audio
Output
Output
1 RJ-45, 1 IR, 1 RS232
1 HDMI, 1 IR, 1RS232
Output Connector
RJ-45, 3.5mm mini jack, 3p
captive screw connector
HDMI female, 3.5mm mini
jack, 3p captive screw
connector
General
Resolution Range
640x480@60Hz~4K×2K@30Hz
Transmission Mode
HD Base T
Transmission Distance
1080p 70m
4k 40m
Bandwidth
10.2Gbps
HDMI Standard
Support HDMI2.0 and HDCP2.2
Impedance
75Ω
Temperature
-20 ~ +70℃
Humidity
10% ~ 90%
Power Supply
Input: 100VAC~240VAC, 50/60Hz Output: DC 24V, 1.25A
Power Consumption
11W
Case Dimension
W115xH16x D84mm
W115xH16x D84mm
Net Weight
150g
150g
NOTE: All nominal levels are at ±10%.

HDBaseT Extender
8
4.1 Supported Resolution
Aspect Ratio
Resolution
Refresh Rate
4Kx 2K
4096x2160
30Hz
3840x2160
24/25/30Hz
16:9
1920x1080
60Hz
1600x900
60Hz
1366x768
60Hz
1280x720
60Hz
1024x576
60Hz
16:10
1920x1200
60Hz
1680x1050
60Hz
1360x768
60Hz
1280x800
60Hz
4:3
1600x1200
60/65/70/75/85Hz
1280x1024
60/75/85/96Hz
1024x768
60/70/75/85Hz
800x600
56/60/72/75/85Hz
640x480
60/72/75Hz
Note: TPU411 supports 4k HDMI signal, please adopt quality HDMI cables compliant
with HDMI2.0 for reliable transmission.

HDBaseT Extender
9
5. Panel Drawing
5-1 TPU411T
5-2 TPU411R
84 mm
115 mm
16 mm
84 mm
115 mm
16 mm

HDBaseT Extender
10
6. Troubleshooting & Maintenance
lNo image on display:
lEnsure that the display device has been set to the correct input.
lEnsure that the HDMI cables used for both the source/transmitter and the
receiver/display are properly connected and are working. Test the HDMI cables
directly from a source to display and ensure their operation.
lEnsure that the CAT5e/CAT6a cable has not been damaged and that it has been
terminated correctly with T568B on both ends. A temporary length of
CAT5e/Cat6 can be used for testing to ensure that the devices are all compatible
and working properly.
lEnsure proper grounding of the power supply.
lKnown issues with HDMI 1.2 source devices:
Older compatibility (HDMI 1.2) may result in HDBaseT transmission issues.
Please contact Technical Support of your director for a solution to these issues.
lColor lose or poor picture quality:
lEnsure that the HDMI cables used for both the source and transmitter and the
receiver and display are properly connected and are of good quality. Test the
HDMI cables directly from a source to display and ensure their picture quality.
lEnsure proper grounding of the power supply.
lIf the static becomes stronger or picture quality becomes worse when connecting
the video connectors, this may be due to improper grounding.
lCheck the grounding and make sure all the components are properly grounded
to a common ground. Improper grounding may cause damage to the receiver.
If your problem persists after following the above troubleshooting steps, seek further
help from authorized dealer or our technical support.

HDBaseT Extender
11
7. After-sales Service
If there appear some problems when running the device, please check and deal with the
problems reference to this user manual. Any transport costs are borne by the users
during the warranty.
1) Product Limited Warranty: We warrants that its products will be free from defects
in materials and workmanship for three years, which starts from the first day the
product leaves warehouse (check the SN mark on the product).
Proof of purchase in the form of a bill of sale or receipted invoice must be presented
to obtain warranty service.
2) What the warranty does not cover:
lWarranty expiration.
lFactory applied serial number has been altered or removed from the product.
lDamage, deterioration or malfunction caused by:
lNormal wear and tear
lUse of supplies or parts not meeting our specifications
lNo certificate or invoice as the proof of warranty.
lThe product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
lDamage caused by force majeure.
lServicing not authorized
lAny other causes which does not relate to a product defect
lDelivery, installation or labor charges for installation or setup of the product
3) Technical Support: Email to our after-sales department or make a call, please
inform us the following information about your cases.
lProduct version and name.
lDetailed failure situations.
lThe formation of the cases.
Remarks: For any questions or problems, please try to get help from your local
distributor.