Giant B92X User manual

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 1/ 21 www.harvilon.com
User Manual

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 2/ 21 www.harvilon.com
Table of Contents
1. Product Overview
1.1 Simply Description………………………………………………………………
1.2 Main Feature.……………………………………………………………………
1.3 Specification……………………………………………………………………
2. Hardware Description
2.1 Product Appearance……………………………………………………………
2.1.1 Front Panel………………………………………………………………………………
2.1.2 Back Panel………………………………………………………………………………
2.2 Reboot……………………………………………………………………………
2.3 System Requirements…………………………………………………………
2.4 Install Condition…………………………………………………………………
3. TCP/IP Setting
4. Configuration Guide
4.1 Start and Login …………………………………………………………………
4.2 Status………………………………………………………………………………
4.2.1 Overview…………………………………………………………………………………
4.2.2 Firewall…………………………………………………………………………………
4.2.3 Routing List ……………………………………………………………………………
4.2.4 System Log ……………………………………………………………………………
4.2.5 Kernel Log………………………………………………………………………………
4.2.6 Processes………………………………………………………………………………
4.2.7 Realtime Graphs…………………………………………………………………………
4.3 System……………………………………………………………………………
4.3.1 System……………………………………………………………………………………
4.3.2 Administration…………………………………………………………………………
4.3.3 Software…………………………………………………………………………………
4.3.4 Startup……………………………………………………………………………………
4.3.5 Schedule Tasks…………………………………………………………………………
4.3.6 Mount Points, LED Configuration……………………………………………………

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 3/ 21 www.harvilon.com
4.3.7 Backup/Flash Firmware…………………………………………………………………
4.3.8 Reboot………………………………………………………………………………………
4.4 Service……………………………………………………………………………
4.4.1 Dynamic DNS……………………………………………………………………………
4.5 Network……………………………………………………………………………
4.5.2 Wireless……………………………………………………………………………………
4.5.3 DHCP/DNS、Hostnames, Static Routes………………………………………………
4.5.4 Firewall……………………………………………………………………………………
4.6 Log Out……………………………………………………………………………
4.7 Flash Firmware……………………………………………………………………
5.FAQ ……………………………………………………………………………………

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 4/ 21 www.harvilon.com
1. Product Overview
1.1 Simply Description
B92X provide an easy way to expend your wired Ethernet to wireless. It work
well on gateway, and you could configure it via Web.
It could meet both enterprise and the home’s requirements economically, users could
browser the internet anytime and anywhere. It has multi-function ,highly-perfomance and easy
installation, which will be your best choice to build your own WLAN.
In order to protect your data from danger .B92X provide multi-protection, support unable
SSID broadcast , also provide 64/128/152 bit WEP encryption , support for WPA / WPA-PSK,
WPA2/WPA2-PSK security mechanism ,
Comply with IEEE802.11ac/ 802.11a/ 802.11n/ 802.11g/ 802.11b/ 802.113/802.113u standard
has 300Mbps , after add the 5G mode, the max 5G wireless rate could be 867Mbps. Our smart
antenna management, makes the B92X performs much better than other similar product in WiFi
transmission distance, perfectly compitable with other network device.
1.2 Features and Specification
1.2.1 Main Features
Provide 5 10M/100M Ethernet port
DHCP server
Support RTS/CTS protocol , ensure the communication quality
Roaming technology , efficient wireless connect
DHCP serve static IP address
Web manage
1.2.2 Specification
Comply with IEEE802.11ac/802.11a/802.11n/802.11g/802.11b/802.113/802.113u
standard
Support TCP/IP、DHCP、ICMP protocol
Auto MDI/MDIX port
Indictor LED, power adapter(12V 1A)
Work temperature 0℃- 40℃
Operating Humidity：10%~90% non-condensing
2. Hardware Description
2.1 Panel Layout
2.1.1 Front Panel

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 5/ 21 www.harvilon.com
Indictor LED (Will adjust with the specific mode)
Indictor LED
Description
Function
POWER
Power LED
Keep ON - Power in
Keep Off - No Power
Mode or USB
Mode or USB LED
Flashing - Mode or USB work
Keep Off - Mode or USB not work
LAN
LAN LED
On - The relevant port connect
Off - No connect to the relevant
port
Flashing- Data transmission on
the relevant port
WLAN
Wifi LED
Off - Wireless function unable
On - Wireless function enable
Interface((Will adjust with the specific mode)
Interface
Description
Function
USB
USB2.0 Port
External USB device or USB net
card
Micro SD(TF)
Micro SD(TF) slot
External Micro SD card slot, data
exchange
2.1.2 Back Panel
Port(Will adjust with the specific mode)
Port
Description
Function
DC
Power Port
Connect the supplied power
adapter.
LAN
LAN Port (RJ45)
Connect to the devices in the
LAN, such as HUB, switches or
PC

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 6/ 21 www.harvilon.com
WAN
WAN Port (RJ45)
Connect to the WAN device, data
exchange with the internet
Button(Will adjust with the specific mode)
Button
Description
Function
REST/WPS
REST/WPS
Multi-function button
Rest: Press for 8 seconds
WPS: Press one times.
Antenna
2* 5Dbi omni antenna
Wireless data transfer and
receive
2.2 Rest
If you want to rest to the factory default settings, please refer the below steps
1) To plug the power adapter.
2) When the router works normally, press the REST/WPS button for 8 seconds.
3) All the router’s LEDs will off and then on again, wait until it work normally.
4) When above 3 steps done, the router will rest to the factory default setting.
Warning:
Before steps finishing, don’t cut the power off, or it will break your router.
2.3 System Requirements.
Network card and Ethernet cable
TCP/TP net software (Windows 95 or higher version has pre-install)
IE 5.0 or higher version
2.4 Install Condition
When you install the router, please refer the below
Put the device horizontally
Keep away from any heat device
Do not put it in some place which is too dirty or too humidity.
Remark:
The environment will effect the transfer distance , recommend using environment:
Temperature: 0℃~40℃,Humidity: 10%~95% RH
3. TCP/IP Configuration
Before using the device, you need to configure the network correctly, this manual is based
on the Windows 2000/XP, the IP of the device is 192.168.1.1 , subnet mask is 255.255.255.0 .
Firstly, connect your PC to the LAN port, and then you can configure the IP of your PC in 2
ways.
Set the IP
Set your PC’s IP as 192.168.1.xxx(xxx could be any number in 2~254), subnet mask

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 7/ 21 www.harvilon.com
to be 255.255.255.0 , default gateway 192.168.1.1 , DNS server 192.168.1.1
Auto set the IP by the DHCP server.
Set the TCP/IP to “automatically get IP address”, after setting , you could use the
Ping command to check if the device has connected to the PC. For example, in
Windows 2000, run the cmd.exe , and the enter ping 192.168.1.1 If the screen shows as
the below, means OK, the device connected to the PC.
If it shows as below, it means fail
When it fails to connect, you could check as below.
1)：If the hardware connect in right way?
>>The relevant LED to the PC must be on
2)：If your PC’s TCP/IP sets right?
>>If the IP of the device is 192.168.1.1 , your PC’s IP must be 192.168.1.xxx(xxx should
be 2~253)
4. Configuration Guide
4.1 Start and Login
The router provide the UI based on the IE, this solution could work in any MS Windows,
Macintosh or UNIX system . Run the browser, unable the VPN (if the VPN is working) , and then
input the 192.168.1.1 in browser.After doing that, you will see the login page, you should enter it
as the administer, which means you should enter the username: root /Password: admin , and
then click the “log in”

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 8/ 21 www.harvilon.com
The system of the B92X is OpenWrt
4-1 Log in webpage
When everything goes well, the browser will show as the 4-2. There are several tag, click
some tag, you could configure relevant function settings.
4-2

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 9/ 21 www.harvilon.com
4.2 UI
4.2.1 Overview
Click Status - Overview You could check the running information, included system
information, Memory, network, DHCP leases, wireless and associate stations, as 4.2.1
4.2.1
System: Router name, Router model, Firmware version, Kernel version, Local Time, Uptime,
Load average.
Memory: Total available , Free, Caches, Buffered
Network: The connection status of the WAN port.
DHCP Leases: Show the IP address ,MAC, and the Lease time
Wireless: It is about the wireless status , will included SSID, Mode, Work Channel, Bitrates,
the MAC of the wireless interface , the Encryption of the transmission.
Associate: Shows the status of all the device connect to the router via Wireless
4.2.2 Firewall
Click Status - firewall, you could check the firewall status of the device

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 10 / 21 www.harvilon.com
4.2.2
4.2.3 Routing List
Click the status-routes, you could check the routing list of the device, the currently active on
the device.
4.2.4 System Log
Click Status - System Log, you could check the running status and the operate history

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 11 / 21 www.harvilon.com
4.2.4
4.2.5 Kernel Log
Click Status - Kernel Log , you could check some information about the device’s system
4.2.6 Processes
Click the progresses, you could check an overview over currently running system processes and
their status. Such as CPU usage, Memory usage. You could hang up ,terminate or even kill the

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 12 / 21 www.harvilon.com
program, depends on your requirements.
As the 4.2.6
4.2.6
4.2.7 Realtime Graphs
Click the Realtime Graphs ,you could check the load, traffic, wireless and connection of the
device.

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 13 / 21 www.harvilon.com
Pic 4.2.7
4.3.1 System
Click System, you could check and edit some basic information of the device,
including Local time, Hostname, time zone.
4.3.1
4.3.2 System - Administration
You can edit the administrator password for accessing the device

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 14 / 21 www.harvilon.com
Pic 4.3.2
4.3.3 Software
Click the software page, you could download and install the package , do not operate it
without a professional engineer.
4.3.4 Startup
Click to the Startup page, You can enable or disable installed init scripts here. Changes will
applied after a device reboot, do not operate it without a professional engineer.
4.3.5 Schedule Tasks
This is the system crontab in which scheduled tasks can be defined.，do not operate it
without a professional engineer.
4.3.6 Mount Points, LED Configuration
Do some edition about the system , do not operate it without a professional engineer.
4.3.7 Backup/Flash Firmware
You could upgrade the firmware or backup it in this page, as below.
4.3.7
4.3.8 Reboot
When you click the Reboot tag, the device will reboot.

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 15 / 21 www.harvilon.com
4.3.8
4.4. Service
4.4.1 Dynamic DNS
Dynamic DNS allows that your router can be reached with a fixed hostname while having a
dynamically changing IP address
4.5 Network
4.5.1 Interfaces
Click the Network-Interface, you could check the wired port’s status and edit it.
4.5.1
4.5.1.1 Add APN
1. In interface page, Select “WAN”, click “Edit”
2. Fill in information as picture 4.5.1.1
3. Key in your local APN.

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 16 / 21 www.harvilon.com
4. Click “Save&Apply”
4.5.1.1
4.5.2 Wireless
Click the Network-Wifi, you could check the wireless port’s status and edit it.
4.5.2
4.5.3 DHCP/DNS、Hostnames, Static Routes,
You could edit these setting in relevant page. do not operate it without a professional
engineer.
4.5.4 Firewall
The firewall creates zones over your network interfaces to control network traffic flow

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 17 / 21 www.harvilon.com
4.5.4
4.6 Log out
Click the Log Out tag, you will log out the website.
More details about the system. Please refer the https://openwrt.org/
4.7 Flash Firmware
1. Connect device B926 to computer via LAN port ,

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 18 / 21 www.harvilon.com
2.Change IPaddress to static IP, such as 192.168.1.22, refer to picture.
3. Press “reset” Button, (PIC 1), power on the router (PIC 2) .
Release “RESET” button, when the wifi light be quick flashing .

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 19 / 21 www.harvilon.com
4. Acess http://192.168.1.1, into “ Firmware recovery page” as below pic.
Click Chinese “浏览” to select firmware, and then clieck “submit and flashing ”
Began to flash, which will take 100 seconds;
During uploading time,don’t move or power off the router!!
Otherwise the router will dead !!

深圳市瀚威隆科技有限公司
Shenzhen Harvilon Technology Co.,Ltd
User Manual of Wireless Router B926 20 / 21 www.harvilon.com
After 100 seconds , the the file upload success will shown
5. Recover the IP address into automatic obtain