CleanFreak CPL-1600-AM-CF (P-400) User manual
MULTIPURPOSE AIR MOVER
OWNER’S MANUAL
CPL-1600-AM-CF (P-400)
CleanFreak.com
3900 N. Providence Avenue
Appleton, WI 54913, USA
Toll Free: (888) 722-5508
Tel: (920) 882-8453, Fax: (920) 380-0878
PLEASE READ AND SAVE THESE INSTRUCTIONS
Index
Introduction ............................................................................................................................... 2
Operation / Instructions................................................................................................................3
Safety Instructions...................................................................................................................... 4
Maintenance Instructions / Troubleshooting............................................................................... 5
Specifications..............................................................................................................................6
Parts List .................................................................................................................................... 7
Accessories ............................................................................................................................... 8
Introduction
CleanFreak’s CPL-1600-AM-CF (P-400) Air Mover is a professional level and
multipurpose Air Mover with the most efficient engineering design. CPL-1600-AM-CF (P-
400) Air Mover is ETL/CETL certified.
Features:
• Low amp draw with high airflow capacity
• Super quiet and super lightweight.
• Easy clean filter system (optional).
• Easy carrying and stackable.
• Easily disassembled for thorough cleaning and service.
• 20 ft. cord with easy cord wrap design.
• Safety screens on open vents.
• 3 speed switch.
• 4 positions (0°, 20°, 45°, 90°).
0° 20° 45° 90°
• Durable and rugged housing structure.
Operation / Instructions
CleanFreak’s CPL-1600-AM-CF (P-400) Multipurpose Air Mover
is intended to move air and to dry floors, walls, furniture, etc.
Durable and easy to operate with an effective balance of static
pressure and airflow suitable for a variety of applications.
1. Air Movers are shipped ready to be put into service. Prior
to plugging in the unit into the power source, inspect
completely for any shipping damage.
2. Plug the electrical cord into the power outlet.
3. Carefully place the Air Mover unit on a stable, flat dry
surface.
4. The unit has four position capabilities to aim airflow across
flat surfaces or angled upward.
5. Turn the switch to desired speed and make sure it is
operating correctly.
6. All Air Mover in operation must be supervised at all times.
AIR MOVER
STORAGE:
Air Movers
can be
stacked
(up
to4)
on
their
sides
for
storage.
NOTICE:
1. Stacking
feature is not
secure for
transportation.
2. Remove
the
filters before
stacking.
Safety Instructions
1. To prevent electric shock, do not operate unit in standing water. Never plug in or unplug the unit
with wet hands or while standing in water.
2. To avoid risk of injury, do not direct air flow at face or body.
3. To reduce the risk of fire or electric shock, do not use the Air Mover with any solid-state
speed control device.
4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification
and/or installation of a GFCI receptacle if necessary.
5. Do not operate any unit with a damaged cord or plug. Discard unit or return to an authorized
service facility for examination and/or repair.
6. Unplug the unit from the power source before servicing or cleaning.
7. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs,
runners, or similar coverings. Place the power cord away from traffic area to prevent tripping.
8. Do not allow children to play with or around Air Mover.
9. Do not move or carry an Air Mover when unit is operating.
10.Air Mover in operation must be supervised at all times.
Maintenance Instructions
1.To keep the Air Mover clean, use a damp cloth to wipe the surface of the housing.
2.Never clean the Air Mover with water.
3. When not in use, unplug and store the Air Mover in a dry indoor place out of reach of
children.
4.Always disconnect the Air Mover from its power source before performing any maintenance
or cleaning.
5.Clean the filters (optional item) as often as necessary to avoid loss of airflow.
Troubleshooting
For any problems not listed below, call your local distributor or contact our Service Department.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Air Mover not
running
No power input
Plug in the air mover; check circuit breaker
Switch not turned on
Turn on switch
Unit fan jammed
Remove material jamming fan wheel
Intake or exhaust blocked
Turn unit off and allow to cool,
then remove blockage
Air Mover vibrates
excessively
Accumulation
ofdirtonfan blade
Clean air mover blade
Specifications
Model
CPL-1600-AM-CF (P-400)
Volt / Cycle
115V / 60Hz
Power
1/4 hp
Max. Amp
3.0 A
Weight (Unit / Box)
15 lbs. / 19 lbs.
Speeds (RPM –L / M / H)
3 Speeds / RPM (L-1,050/ M-1,350 / H-1,600)
Unit / Box Size (L x W x H)
13.9” x 14.8” x 14.6” / 15.5” x 15” x 15”
Cord Length
20 ft.
Overheating Protection
Thermally Protected
Rated Airflow
(On
High)
1600 CFM
Positions
4 (0°, 20° Kickstand, 45°, 90°)
Housing
PP (Polypropylene)
Safety Marks
ETL / C-ETL
Filter System
Optional
400-17
Capacitor
17
- 7-
Parts List
Accessories
Filters (Optional)
A
set
of
Filters
is
available for the CPL-1600-AM-CF Air Movers which will help prevent small debris
and dust
from entering the unit. To clean the
filters:
remove filters from the unit and wash with
warm
soapy
water, rinse with clean water and let dry thoroughly before
reinstalling.
Installation:
Filters snaps into the
air
inlets.
Note:
The
filter
I is Motor
Side,
The
filter
II is
for the
Fan
Side.
Filter
Removal:
Pull
the filters out
of
the
unit.
Note:
After cleaning,
make
sure
filters
are
dry
before
reinstalling.
- 8-
Table of contents
