ClearStream Hybrid 2 User manual

CLEARSTREAM HYBRID2
ASSEMBLY INSTRUCTIONS
1 OF 2
(A) Insert casters into Side Frames
(B) Attach Bottom Frame to Side Frames with Bolts and Screwdriver
(A) Insert Back Grids into back channels
(B) Insert Clear Sliding Panels into front channels Attach Top Frame to Side Frames with Bolts
PARTS:
(1) Side Frame (Left)
(1) Side Frame (Right)
(1) Bottom Frame
(1) Top Frame
(2) Back Grid
(2) Clear Sliding Panel
(1) Header Wire
(2) Header Graphic
(2) Lid
(4) Casters
(8) Bolts
(2) 40” x 45” Clear Bag
TOOLS REQUIRED:
Phillips Screwdriver 1
23

(A) Insert Header Wire into weld slips on back of Side Frames
(B) Hang Header Graphics from Header Wire
Enjoy the ClearStream Hybrid!
(A) Install 40”x45”Clear Bags (not pictured)
(B) Attach Lids to Top Frame
5
4
CLEARSTREAM HYBRID2
ASSEMBLY INSTRUCTIONS
2 OF 2