Clever Acoustics VC 1000 User manual

USER MANUAL
www.cleveracoustics.co.uk
VC 1000 100V 5 ZONE VOLUME CONTROL
Order code: CRVOL07

1
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
CAUTION!
INPUT VOLTAGE OF 70-100V
SAFETY INSTRUCTIONS
Every person involved with the installation, operation & maintenance of this
equipment should:
- Be competent
- Follow the instructions of this manual
CAUTION! TAKE CARE USING THIS EQUIPMENT!
HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!
Before your initial start-up, please make sure that there is no damage caused during
transportation. Should there be any, consult your dealer and do not use the
equipment.
To maintain the equipment in good working condition and to ensure safe operation, it is necessary
for the user to follow the safety instructions and warning notes written in this manual.
Please note that damages caused by user modications to this equipment are not
subject to warranty.

2
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused
by the non-observance of this manual or any unauthorised modication to the
equipment.
• Never let the power-cable come into contact with other cables. Handle the power-cable
and all mains voltage connections with particular caution!
• Never remove warning or informative labels from the equipment.
• Do not open the equipment and do not modify the equipment.
• Do not switch the equipment on and off in short intervals, as this will reduce the
system’s life.
• Do not expose to ammable sources or gases.
• Make sure that the speaker-cable is never crimped or damaged. Check the equipment and
the speaker-cable periodically.
• If the equipment is dropped or damaged, disconnect the mains power supply immediately.
Have a qualied engineer inspect the equipment before operating again.
• If your product fails to function correctly, discontinue use immediately. Pack the unit
securely (preferably in the original packing material), and return it to your Prolight dealer
for service.
• Repairs, servicing and power connection must only be carried out by a qualied
technician. THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
• WARRANTY; One year from date of purchase.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual,
the product may suffer damage and the warranty becomes void.
Incorrect operation may lead to danger e.g.: short-circuit, burns, electric shocks etc.
Do not endanger your own safety and the safety of others!
Incorrect installation or use can cause serious damage to people and property.

3
This 100V volume controller was designed specically for use in permanent audio
installations, where reliability and premium sound quality are a must. Highly rugged
construction and design make this volume control perfect for continuous duty
applications in situations were power will be left on for indenite periods of time.
This 100V volume control is warranted from defects for one year from the date of
purchase. Should your volume control require service, either within or beyond that
warranty period, please contact your Prolight Dealer.
This unit includes a host of features, along with an impressive list of specications, which
are detailed over the next pages. Please take the time to read this document completely
prior to installation of this product.
The VC 1000 volume controller is designed to suit all PA system application in schools,
ofces and stores.
Features
• 1U 19” rack mount chassis
• Low distortion, low noise components
• 5 channel speaker outputs (200W per channel, 1000W total)
• 5 channel amplier inputs
• 5 step attenuation
• Rubber feet for desktop use
• Ideal for controlling volumes in speaker zones
VC 1000
1000W
5
5 (200W per channel, 1000W total)
4 + off
100Hz - 16kHz (±1.5dB)
484 x 142 x 44
4.45kg
Product
Rated output power:
Amplier Inputs:
Outputs:
Attenuation steps:
Frequency response:
Dimensions (mm)
Weight:

4
1. Zone Volume controls - Use the controls to increase or decrease the volume of the
output speaker zones
2. Input connections -
3. Output zones sockets - Use these sockets to output to the designated speaker output zones.
NOTE: All connector covers must be in place to prevent risk from electric shock.

5
SLAVE AMPLIFIER
SLAVE AMPLIFIER
SLAVE AMPLIFIER
SLAVE AMPLIFIER
SLAVE AMPLIFIER

6
Cleaning and Maintenance
We recommend a frequent cleaning of the product. Please use a soft lint free and moistened
cloth. Never use alcohol or solvents.
There are no serviceable parts inside the product except for the fuse. Maintenance and service
operations are only to be carried out by authorised dealers.
CAUTION - DANGER TO LIFE
SWITCH OFF AMPLIFIER AND DISCONNECT
THE SPEAKER BEFORE
STARTING MAINTENANCE

www.cleveracoustics.co.uk