Clickfree C2N User manual

C2N Network Backup Drive
Backing up with Clickfree is easy
1
Connect the USB cable to Clickfree and
to your computer.
2
Wait for up to 60 seconds. The
Clickfree backup program will
start automatically.
3
60s
Windows Vista & 7:


Mac:
The first time you connect a Clickfree
device, these windows may appear.
To backup another computer linked to
the same router, repeat Step 1 & 2.
NOTE: Clickfree must remain plugged to
one of the computers that is backed up
and linked to the router. Both the
computer and Clickfree must remain ON
to perform scheduled backups.
Quick Start Guide
Plug in Clickfree to your computer. When
Clickfree starts and you see the Welcome
screen, click on the Restore/Transfer.
Support Restoring files
Didn’t start automatically?
1. Try unplugging Clickfree and plugging
it back in.
Still didn’t start?
If Clickfree hasn’t started automatically
there must be something on your
computer that is blocking Clickfree.
Please follow these steps:
1. Plug in Clickfree to your computer.
2. Click on the Windows Start button,
click “My Computer” (Windows XP &
2000) or “Computer” (Windows
Vista, 7).
3. Locate “ClickFree_System”. Right
click on “ClickFree_System” and
select “Explore”.
4. Double click “FixMyClickFreeBackup”.
This should repair your problem.
Troubleshooting
network router
3.0
For more in depth setup information,
the full user manual can be downloaded
from our website at:
www.clickfree.com/support
For technical support on any of our
Clickfree products, contact our support
team at any time.
Toll Free: +1 866.680.0516 (North America)
Telephone: [phone]
Email: [email protected]
To contact technical support in your region,
visit our website at:
www.clickfree.com/support