Clifford Cyber 9 User manual

World-ClassAutoSecurity TM
D:\corel\DRAW\COVERS\Cov-cyber9.cdr
Tuesday, June 15, 1999 4:59:15 PM
Color profile: _DEFAULT.CCM - Generic Profile
Composite

All Clifford systems are covered by
one or more of the following Clifford Electronics patents:
4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464;
4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215;
5,157,375 and other patents

1
Table of Contents
Standard Features of the Cyber 9 ...................3
Welcome.................................9
Your 4-button/12-channel remote controls.............10
How to use your keychain remote control.................10
What each button/channel does......................11
How to interpret the chirps and parking light flashes........12
Anti-CodeGrabbing™ (ACG) with Random Code Encryption ...13
Enhanced AutoArming™.......................13
AutoArming enable/disable........................13
Visual acknowledgment ..........................13
AutoArm & Lock...............................13
Instant AutoArming bypass.........................13
Smart trunk release option ......................13
UltraSecure™ valet mode .......................14
Definitions ..................................14
To enable valet mode ...........................14
To exit valet mode .............................15
Setting your own secret valet code ....................15
Remote controlled valet mode entry and exit...............15
Keyless entry in valet mode.........................15
FACT — False Alarm Control and Test ................16
Selectable starter/ignition interrupt .................16

2
Table of Contents (cont.)
How to interpret the LED status indicator ...............16
Automatic Battery-Saving Mode ......................16
AutoLock and AutoUnLock™.....................16
Remote controlled sensor adjustments................17
Smart AutoTesting™ ..........................17
Specific malfunction identification.....................18
Automatic malfunction bypass ....................18
Multiple-event TotalRecall™ .....................18
Smart prior intrusion attempt alert ..................18
High-output Insignia™ Siren .....................19
Long-term chirp silencing..........................19
Remote controlled chirp muting......................19
Siren duration.................................19
SmartPowerUp™ II...........................19
User-selectable features........................20
Step-by-step programming instructions ...............20
EXAMPLE 1 ..................................21
EXAMPLE 2..................................21
Adding new remote controls .....................22
How to erase the codes of lost or stolen remote controls......22
Table of user-selectable features.................23–24

Standard Features of the Cyber 9
q✔Lifetime Warranty—For as long as you own the vehicle, Clifford will
repair or replace the control unit and remote controls free of charge (see
warranty card for full details).
q✔FACT™—FalseA larmControl andTest — One of many patented Clifford
innovations, FACT absolutely, positively ends recurring false alarms.
q✔A Pair of 4-Button /12-Channel Remote Controls—Fingertip command from a
typical range of 100 feet.
q✔AntiScan™— Some car thieves still use “scanners”that transmit one
digital code after another until they hit the one code that disarms the
alarm. AntiScan blocks thieves’ scanners to prevent disarming by anyone
other than you.
q✔Anti-CodeGrabbing™ (ACG) with Random Code Encryption — A
code-grabber is a new device that lets a thief record and capture off the air
from a distance the digital code transmitted by your remote control
whenever you arm your car. When you leave, the thief replays the code to
disarm the alarm and unlock your car’s doors. ACG with Random Code
Encryption makes thieves’ code-grabbers completely useless, because
each time you press the button on your remote control a different random
codeis transmitted, yet the system will flawlessly recognize and respond
to your transmitter’s new code and ignore all others.
q✔Full-Time Remote Panic with Automatic Door Locking and Unlocking— If
you feel threatened, you can, with just a fingertip touch on your remote
control, sound the siren, flash the parking lights and unlock your vehicle’s
power locks for quick entry into your car without fumbling with your
keys. If you press the panic button while driving, the siren will sound, the
lights will flash and the doors will lock to shield you from the assailant.
q✔UltraSecure Coded Valet Mode™—Ensures that no thief can turn off
your Cyber 9 like they can all other brands of alarms.
nRemote Controlled Valet Mode Entry and Exit— With just a press of a
button on your remote control from up to 100 feet away, you can enter or exit
valet mode. Parking light flashes visually confirm valet mode entry and exit.
3

Standard Features of the Cyber 9 (cont.)
q✔Remotely Adjustable Dual-Zone Piezo Sensor™— With just a touch on the
remote, you may, at any time or place, adjust and test the sensitivity of
this microprocessor-controlled solid-state sensor. The two sensor zones
provide fullperimeter protection: If someone bumps into your car, the
system will sound a distinctive warning tone; if forced entry is detected,
the full alarm will sound.
nAudible Confirmation of Sensor Adjustments — Issues two chirps for
each incremental increase and a single chirp for each incremental
decrease in sensitivity.
nUnprecedented Reliability—There are no moving mechanical parts to
wear out and the entire electronic circuitry resides in the passenger
compartment, not in the engine well where it would be exposed to
temperature extremes, water, vibration and dirt.
nAdjust and Test Unobtrusively— No repeated arming and disarming,
and no siren wailing. You set and test sensitivity without activating the
alarm!
q✔Dual-Mode “Chirp” Silencing—Whenever you remotely arm or disarm, the
siren “chirps”and the parking lights flash to confirm system status.
Wheneveryou wish, you may silence the chirps with either of these two
methods:
nRemote Controlled Chirp Muting —Just a press of remote control button
3 will arm and disarm the system silently. It’s perfect when parking at
night in a quiet residential area.
nLong-Term Chirp Silencing—A few flicks of a switch silences the
chirps until you choose to reactivate them.
q✔Remote Controlled Courtesy Lighting—For your personal safety and
convenience, when you remotely disarm your Cyber 9, the interior lights
turn on and stay on until you start the engine or 30 seconds, whichever
occurs first.
q✔Built-In Parking Light Flasher —Visually confirms door lock and system
status.
4

Standard Features of the Cyber 9 (cont.)
q✔Remote Door Locking/Unlocking with Built-in Relays — No more fumbling
with keys in the dark or bad weather!A press of a button on the remote
control simultaneously arms your system and locks your vehicle’s power
locks. Another press disarms and unlocks.
nUser-Selectable AutoLock™— Automatically locks the doors the
instant you turn on the ignition to start the engine.
nUser-Selectable AutoUnLock™— Automatically unlocks the doors
when you turn off the engine.
nDeluxe Remote Keyless Entry in Valet Mode — Use your remote
control to lock and unlock the car doors and remotely activate system
accessories even while the system is in valet mode.
q✔Remote Headlight Activation Capability— Remotely turn on the
headlights to illuminate your way to and from your vehicle (requires an
optional relay).
q✔Remote Window/Sunroof Closure Capability — On certain vehicles
(including several models of Mercedes Benz, Jaguar, Volkswagen and
BMW), the system’s integrated timer and an optional relay can be used to
automatically close the power windows and sunroof every time you
remotely arm your system.
q✔Patented Smart AutoTesting™—Automatically tests all system triggers and
sensors every time you remotely arm and warns you if you accidentally
arm your Cyber 9 system with the hood or trunk open. If there is a
genuine trigger or sensor malfunction, the system will specifically
identify the problem, thereby eliminating time-consuming and costly
trouble-shooting.
q✔Patented Malfunction AutoBypass™ with Automatic Monitoring—In the
unlikely event of a trigger or sensor malfunction, your Cyber 9 will
automatically bypass the malfunction and arm all other points to continue
relentless protection of your vehicle. If you simply left the hood, trunk or
a door open when you armed, just close it and the system will again
monitor that trigger point.
5

Standard Features of the Cyber 9 (cont.)
q✔Multiple-Event TotalRecall™— Cyber 9’s memory stores the identity of the
last eight triggers and/or sensors activated. This provides an invaluable
diagnostic means, since, whenever you wish, the system will visually
identify the activated triggers and sensors in reverse chronological order.
q✔Patented Smart Prior Intrusion Attempt Alert — When you return to your
vehicle and remotely disarm your Cyber 9, a special chirp and parking
light flash sequence will audibly and visually alert you from a distance if
an intrusion attempt was foiled while you were away. Your Cyber 9 will
even identify the specific trigger or sensor that detected the intrusion
attempt.
q✔High-Output Insignia Siren — A loudyet compact siren designed
exclusively by Clifford Electronics for far superior performance, features,
reliability and even aesthetics to all other manufacturer’s look-alike,
sound-alike sirens.
nUltra-Reliability — Since sirens are installed in the engine
compartment, they’re continually exposed to an unforgiving
environment of extreme temperatures, vibrations, dirt, dust and water,
which may cause the siren’s electronics to fail. But the entire
electronic circuitry of the Cyber 9 siren and all of its components have
been designed into the underdash control unit. Consequently, the
electronic circuitry is sheltered from the harsh environment and is no
longer the weakest link of the alarm system. In fact, the calculated
mean time between failure (MTBF) of the Cyber 9 Insignia Siren is 10
times better than that of conventional sirens.
nUser-Selectable Siren Duration— You may set the siren wail for your
choice of either 30 or 60 seconds.
nPatented Automatic Noise Abatement —Cyber 9 siren electronics limit
alarm sounding to five siren duration cycles even if a door is left open
in the wake of an intrusion attempt. This ensures against battery drain
or towing of your vehicle due to noise pollution. The system then
automatically resets and re-arms all other points.
6

Standard Features of the Cyber 9 (cont.)
q✔Enhanced User-Selectable AutoArming™— Automatically arms itself
“passively”if you forget. May qualify you for an insurance discount that
could pay for the system (consult your insurance company).
nAutoArming Enable/Disable — You may disable or re-enable
AutoArming with just a few flicks of a switch.
nAutoArm & Lock™— You may set the system to automatically lock the
doors every time the system AutoArms.
nVisual Indication— Two parking lights flashes signal that the
30-second countdown to AutoArming has started.
nInstant AutoArm Bypass— Just a quick turn of the ignition switch will
bypass AutoArming for one cycle — perfect when fueling the vehicle.
The AutoArming feature is automatically restored the next time you
park your vehicle.
q✔Patented Remote Control Code Learning— Just a few flicks of a switch
lets you match to the system up to 4 different 12-channel Clifford remote
controls. Just as easily, a lost or stolen remote control can be deleted from
the system memory.
q✔Multiple-Car Control
— Lets you use the same remote to control up to
seven different vehicles.
q✔Selectable Starter/Ignition Interrupt— You may choose either a fault-proof
mode, which lets you start the engine even in the unlikely event of a
system malfunction, or ultra-secure mode that ensures a thief won’t be
able to start the vehicle even if he finds the system control unit and
disconnects it!
q✔Advanced CMOS Microcomputer—Very large scale integration (VLSI)
microprocessor commands and monitors all system functions more than
1,000,000 times per second, yet it draws less power than the vehicle’s
clock, so it won’t deplete your car battery like other alarms.
q✔Control Unit with 4 Channels— For remote controlled system operation
and accessories.
7

Standard Features of the Cyber 9 (cont.)
q✔High-Luminescence LED Status Indicator with Automatic Battery-Saving
Mode — Adds visual deterrence and identifies system status. To conserve
vehicle battery power, if the system has remained continuously armed for
48 hours, the flash rate will automatically slow to half the normal rate. If
left continuously armed for 96 hours, the blink rate will slow to
one-quarter the normal rate.
q✔Patented SmartPowerUp™ II— When power to the system is
disconnected, the system’s non-volatile memory always remembers the
last state (armed, disarmed or valet mode) and returns to that state when
power is restored. So if a thief disconnects the power and then restores it
in an attempt to start the car, the system will re-arm and instantly sound
the siren while immobilizing the vehicle.
q✔Full-Time Programming Access— You can easily change the status of
more than a dozen different user-selectable features at any time, even
while driving. Clear, audible signals confirm each feature selection and
setting.
8

Welcome to the world of high-technology
vehicle security and convenience
Congratulations on the purchase of your Cyber 9 vehicle
security/convenience system. Clifford Electronics has long been
recognized as the world’s leading manufacturer of high-technology
vehicle security systems and accessories. In fact, Clifford Electronics
holds more patents than all other vehicle security manufacturers
combined. Buying Clifford has always meant buying the best, and
nowhere is our commitment to technological innovation, reliability and
quality more evident than in the astounding Cyber 9.
Your Cyber 9 is loaded with protective features and lifestyle
conveniences that other car alarm companies don’t even have on their
wish lists. Features like Anti-CodeGrabbing that fights off the latest
threat from high-tech thieves. A thief equipped with a code-grabber can
record with total impunity the codes of your car alarm’s remote control
from up to several hundred feet away. How? The thief simply waits for
you to arm or disarm your alarm with your remote control. The thief’s
portable, pocket-sized code-grabber will automatically pick and record
the transmitted code off the air. As soon as you walk away, he simply
plays it back, instantly disarming your alarm and unlocking the doors.
It’s like giving the thief your car keys. Code-grabbing will instantly
defeat all other brands of remote controlled car alarms, regardless of
whether they are equipped with anti-scanning or trillions of digital codes.
Clifford’s unique PlainView Coded Valet Switch ensures that no thief
can turn off your Cyber 9 like the can with all other car alarm brands.
For total freedom from incorrectly adjusted sensors, there’s remote
controlled adjustment of the system’s dual-zone piezo sensor that
allows you to set the desired sensitivity level any place or time with
just a touch of a button on your remote control. Plus there’s remote
controlled valet mode, remote controlled timed headlight activation
capability, an electronic interlock to prevent accidental activation of the
optional remote trunk release, smart automatic locking/unlocking if you
ever “panic” the system, full-time programming access (even while
driving), and much, much more.
Yet despite all the sophistication, the Cyber 9 is amazingly easy to use:
never more difficult than a few flicks of a switch or a press of a button
on one of your miniature keychain remote controls.
9

Your 4-button/12-channel remote controls
The 4-button/12-channel remote controls are ultra-sophisticated miniature radio
transmitters powered by a tiny 12-volt battery. Range is up to 100 feet. A weak remote
control battery will reduce range. Electrical interference and even sunspots can interrupt
the signal from your remote control to the system. If this happens, repeatedly press the
remote control button (this works better than holding the button down). The
4-button/12-channel remote control is the key to your system. It incorporates Clifford’s
Anti-CodeGrabbing™ (ACG) technology for the ultimate protection against
“code-grabbing” devices (see page 13). You will use your remote control to arm and
disarm the system, lock and unlock the doors, activate the panic feature, adjust sensor
sensitivity, enable/exit valet mode, command options such as a remote trunk release,
timed headlight activation, power window operation, electric garage door interface and
even remote starting of the engine and heater or air conditioner, among other options.
How to use your keychain remote control
Your remote control can individually command up to 12 different system functions and
options. It’s like having a TV with 12 channels. You change channels (functions) with
your keychain remote control. But instead of putting 12 buttons on the remote, we made
it easy: First, the button you use the most — button 1 to arm, disarm, lock and unlock —
is larger than the others. Buttons 2, 3 and 4 are the smaller buttons to the right, below
and left of button 1. The LevelShift button on the side of the remote control allows you
to select channels 5–12:
nTo transmit either channel 1, 2, 3 or 4:
Just press either button 1, 2, 3 or 4.
For instance, to transmit channel 3,
press button 3. While you transmit, the
LED indicator will blink once every
second: this indicates level 1.
nTo transmit either channel 5, 6, 7 or 8:
Press the LevelShift button once. This
shifts buttons 1–4 to level 2 (channels
5–8). Then press the desired button
within the next 7 seconds. For instance,
to transmit channel 5, press the
LevelShift button once, then press
button 1. While you transmit, you’ll notice that the LED indicator blinks twice,
pauses, blinks twice, etc.: this indicates level 2.
nTo transmit channel 9, 10, 11 or 12:Press the LevelShift button twice. This shifts
buttons 1–4 to level 3 (channels 9–12). Then press the corresponding button
within the next 7 seconds. For instance, to transmit channel 12, press the LevelShift
button twice, then press button 4. While you transmit, you’ll notice that the LED
blinks three times, pauses, blinks three times, etc.: this indicates level 3.
NOTE: One second after you stop transmitting level 2 or level 3 (channels 5–12), the
remote control automatically returns to level 1 (channels 1–4).
10

What each button/channel does
Your Cyber 9 remote controls come pre-programmed so that certain channels command
certain functions. If you wish, you can actually assign any channel except 9 through 12
to any function (see pages 20-24). The following chart indicates what each remote
control channel number does, and how to transmit each channel number.
Factory settings of the 12 remote control channels
Transmittin
g channel
number:Causes the system to:Press the
LevelShift
button?
How
many
times?
Press
button
number
1arm or disarm and lock or unlock the doors no—1
2optionally turn on the headlights (if the system is armed)
AND
optionally pop the trunk (if the system is disarmed) no —2
3silently arm or disarmno—3
4activate optional accessory function #1no —4
5activate optional accessory function #2yesonce1
6activate optional accessory function #3yesonce2
7activate optional accessory function #4yesonce3
8activate optional accessory function #5yesonce4
9remotely enter or exit valet mode (see page 15) yes twice 1
10 activate optional accessory function #6 yestwice 2
11 remotely adjust sensitivity of the Piezo Sensor’s
primary zone (see page 17) yestwice 3
12 remotely adjust sensitivity of the Piezo Sensor’s
warning zone (see page 17) yestwice4
TO ARM
THE SYSTEM........Press button 1 (channel 1) once. You will hear two chirps and the
parking lights will flash twice. The dashboard LED will flash
repeatedly and your vehicle’s door locks will automatically lock.
TO DISARM
THE SYSTEM........Press button 1 (channel 1) again. One chirp and one parking light
flash confirms disarming. In addition, the doors will
automatically unlock and the interior lights will turn on and stay
on for 30 seconds or until you start the engine, whichever occurs
first.
TO SILENTLY
ARM OR DISARM
THE SYSTEM........
Press button 3 (channel 3). Your Cyber 9 system will arm or
disarm with all the indications noted above except for the chirp
acknowledgments.
11

TO ACTIVATE
THE PANIC
FEATURE..........
Press button 1 (channel 1) for 3 seconds. The parking lights will
flash repeatedly and the siren will blare for 30 or 60 seconds
(user-selectable), or until you press button 1 again to turn it off. If
the ignition is on (indicating you are in the car), the doors will
automatically lock to prevent an assailant from entering. If the
ignition is off, the doors will unlock, allowing you to enter
immediately without fumbling with your keys.
TO REMOTELY
TURN ON THE
HEADLIGHTS .......
Button 2 (channel 2) controls an electronic interlock that lets you
separately command two functions with the same channel: one
when the system is armed and another when disarmed. Pressing
button 2 while the alarm is armed will optionally turn on the
headlights for any duration you wish between one second and two
minutes (the factory setting is 30 seconds; see User-selectable
features on pages 20-24).
TO REMOTELY
OPEN THE TRUNK ... Button 2 (channel 2) can control another function when the
system is disarmed, such as an optional remote trunk release.
Pressing button 2 while the alarm is disarmed will remotely open
the trunk.
TO ACTIVATE
OTHER OPTIONS
REGARDLESS OF
ALARM STATE .......
Button 4 (channel 4) and channels 5–8 and 10 (see How to use
your keychain remote control on page 10) can activate accessories
such as the IntelliStart remote engine starter, remote power
window control, electric garage door and entry gate opener(s),
Cyber 9 systems on your other vehicles, etc.
What about
channels
9, 11 and 12?.......
Channels 9, 11 and 12 control remote valet mode entry/exit (see
page 15) and remote adjustment of each of the two Piezo Sensor
zones (see page 17).
How to interpret the chirps and parking light flashes
When you use the remote control, the system responds with chirps (unless the chirp
muting feature is turned on) and parking light flashes:
Chirps and flashesMeaning
1Your system is disarmed or you have remotely exited valet mode (see page 15)
2Your system is armed or you have remotely engaged valet mode (see page 15)
2 and then 4Armed but there is a door open (if there was a 5-sec. delay) or the sensor is
malfunctioning (if there was a 10-sec. delay) (see Smart AutoTesting on page 17)
3Disarmed but there was an intrusion attempt while you were away
(see Smart prior intrusion attempt on page 18)
4Armed but the hood or trunk is ajar (see Smart AutoTesting on page 17)
12

Anti-CodeGrabbing™ (ACG) with Random Code Encryption
A Clifford exclusive that protects you and your automobile from the most effective and
onerous car stealing device ever used by car thieves — a code-grabber. Code-grabbers
are far more effective and efficient than scanning. Unlike scanners that sequentially
transmit one digital code after another until they hit the correct code to disarm the alarm
(a process that may take minutes to years depending on the system’s total number of
codes), code-grabbers literally record, from hundreds of feet away, the code sent by your
car alarm remote control. Then the thief simply plays back the code when you’re gone,
instantly disarming the alarm and unlocking the doors. It’s like giving the thief your car
keys. Non-Clifford alarms can be defeated that easily. In contrast, Cyber Series systems
use complex digital signal processing and unbreachable encryption to randomly change
the digital code every time you use the remote control. Your remote will never transmit
the same code twice, and the control unit will never accept the same code twice. Thus
the code recorded and played back by the thief’s code-grabber will never be accepted by
your Cyber 9. Only ACG can make a car alarm impervious to code-grabbing, and only
Clifford systems have ACG with Random Code Encryption.
Enhanced AutoArming™
If this feature is enabled and you forget to remotely arm, the system will automatically
arm itself 30 seconds after the vehicle doors are closed. For your convenience, if you
re-open any door(s) within the 30-second countdown, AutoArming will restart from the
beginning once all doors are closed. Cyber 9 has these additional AutoArming features:
nAutoArming enable/disable:If you prefer, you may deactivate or reactivate the
AutoArming feature. See User-selectable features on pages 20-24.
nVisual acknowledgment:Five seconds after you exit the vehicle and close all
the doors, the parking lights will flash twice to confirm that the AutoArming
countdown is progressing. Then, 25 seconds later, the system will AutoArm.
nAutoArm & Lock: To ensure you can’t accidentally lock your keys inside the car,
the system is factory-set not to lock the doors upon AutoArming. To change this
setting, see User-selectable features on pages 20-24.
nInstant AutoArming bypass:Prevents AutoArming when fueling the vehicle and
other times when you wish to temporarily bypass the AutoArming feature. To
activate Instant AutoArming Bypass, rapidly turn the ignition switch to “ON” then
“OFF.” You will hear a single siren chirp to confirm that the system will not
AutoArm. Your Cyber 9 will revert to its normal operating mode when you next
start the engine.
Smart trunk release option
If the remote trunk release feature was installed, you may use remote control button 2 to
remotely pop the trunk. Your system has a built-in electronic interlock to prevent
unintentional activation of the remote trunk release when you drive, or when the system
is armed.
13

UltraSecure™ Coded Valet Mode
Your secret valet code
In seconds, thieves can disable all other alarm brands by hotwiring the ignition and
flicking an easy to find “hidden” valet switch. Your system has safeguards that absolutely
ensure a thief cannot enable the valet mode as a way of “turning off” your system. How?
To enable valet mode, the driver must first enter a secret valet code on the PlainView
switch. If a thief tries guessing your code, after three incorrect entries, the siren will
sound and the system will not accept any further entries for two minutes. Your code will
be a 1-to-3-digit number of your choosing. Each digit can be any number from 1 to 9,
(i.e. the code can be any number between 1 and 999, except those that contain a zero).
Whenever the system is in valet mode, it overrides the AutoArming feature (see page
13) and all the security features are turned off. At various times, you will need to switch
the system off. For instance, when having your car serviced, washed or parked by a
valet.
Your factory-set valet code is the single digit “2.”
NOTE:Ifyoutemporarilylosetheuseofyourremotecontrols,youcandisarmthe
system by enabling valet mode.
Definitions
nDigit: A digit is defined as any number from 1 to 9, inclusive.
nValet code: A valet code may be 1 to 3 digits:
A one-digit code=X=any number between 1-9
A two-digit code=XY=any number between 11-99 (excluding those with zeros)
A three-digit code=XYZ=any number between 111-999 (excluding those with zeros)
Remember, no code can have a zero.
nPlainView switch:A rocker switch mounted on the dashboard or console. The
switch has three positions: 1.) Latched 2.) Center 3.) Spring-loaded momentary.
When you press the latched side, the switch remains in its pressed position. When
you press the momentary side, the switch bounces back to the center position.
nEntering a digit:To enter a digit, you tap (press and release) on the momentary
side of the PlainView switch the number of times corresponding to the numeral of
the digit to be entered, followed by pressing to the latched side, then returning the
switch to its center position.
nEntering a code: If your code has only one digit, enter the code as described in
“Entering a digit.” If your code has more than one digit, just repeat the above for
each digit of your code.
To enable valet mode
1.Turn the ignition switch to its “ON” position or start the engine.
2.Enter your secret valet code on the PlainView switch, then return the switch to its
center position.
14

3.You now have 5 seconds to press the latched position to enter valet mode. The
system’s LED will glow continually for on-going visual confirmation of valet mode.
To exit valet mode
1.Turn the ignition switch to its “ON” position or start the engine.
2.Flick the switch back to its center position. The LED will turn off to confirm that the
system is now in its normal operating mode.
Setting your own secret valet code
Since all Cyber Series systems have the same factory-set code, it is highly advisable that
you set your own valet code. You may choose any 1-, 2-, or 3-digit code that does not
have any zeros. You can also change your valet code whenever you want. Simply write
down the 1-to-3 digit code you wish to use (remember, no zeros in the code), then refer
to the User-selectable features section on pages 20-24.
Example
Let’s say you want to set your valet code to 31. To do so, you would do the following:
1.From the Table of user-selectable features on pages 23 and 24, you would note that
the “set a new secret valet code” feature is in column 3, row 5.
2.Enter program mode by turning on the ignition, entering your current valet code, then
pressing the PlainView switch to its momentary side for 3 seconds until you hear a
chirp.
3.Select column 3 by moving the switch between latched and center 3 times, i.e.:
latched, center, latched, center, latched, center. After a brief pause, you will hear 3
chirps to confirm that you have selected feature column 3.
4.Select row 5 by pressing and releasing the momentary side of the switch 5 times. To
help you count, you will hear a chirp each time you press the momentary side.
5.Immediately flip the switch to the latched position.
6.Enter you new code. To enter 31 as your new code, you would press the switch in
this manner: momentary, momentary, momentary, latched (you’ll hear 3 chirps to
confirm the first digit), momentary, latched (1 chirp to confirm the second digit),
center.
7.Wait 3 seconds until you hear 2 chirps, indicating the new code has been accepted.
8.Turn off the ignition to exit program mode (you’ll hear a 3-chirp confirmation).
9.VERY IMPORTANT: You must immediately test your new secret valet code: Turn
on the ignition, enter your new code, then flip the switch to its latched position. The
LED will illuminate. If it does not, the new code you programmed and the one you
just entered do not match. In such a case, the system will revert to the previous code.
Remote controlled valet mode entry and exit
You can even enable or exit valet mode with your remote control simply by transmitting
channel 9 (LevelShift twice, then button 1). In addition to the above indications, two
parking light flashes will confirm that you have remotely enabled valet mode, while a
single flash confirms exiting of valet mode.
15

Keyless entry in valet mode
Even if valet mode is enabled, you can still remotely control the convenience features.
For instance, simply press button 1 (channel 1) as if you were disarming and the doors
will unlock (indicated by one parking light flash) and the interior lights will turn on.
Press button 1 again and the doors lock (confirmed by two flashes). You can also use the
other channels to activate options such as a remote trunk release or remote engine
starting.
FACT™— False Alarm Control and Test
With FACT, you’ll never experience repeated false alarms. If the Insignia Siren goes
off, DO NOT remotely disarm the system; allow it to run for the full siren duration.
Before sounding the siren a second time, the system automatically checks for another
activated trigger to verify that an intrusion is in progress. Should the siren sound again,
you will know for sure that someone is tampering with your vehicle. (To disable FACT,
see User-selectable features on pages 20-24.)
Selectable starter/ignition interrupt
At the time of installation, you can select whether your Cyber 9 interrupts the starter line
or the ignition line. To verify which line is electronically interrupted, enter the vehicle,
close the doors, arm the system while inside the vehicle, then try to start the engine. If
the engine cranks but does not start, the ignition is bypassed. If it does not crank at all,
the starter is disabled.
In addition, the starter/ignition interrupt will be set in either Fault-Proof mode, which
lets you start the engine even in the unlikely event of a complete system failure, or
Super-Security mode that ensures a thief won’t be able to start the engine even if he cuts
all the wires or finds the system control unit and disconnects it.
Changing the mode requires a minor relay wiring change and installer-only
programming. Your local Authorized Clifford Dealer can make the changes for you.
How to interpret the LED status indicator
The LED on your car’s dashboard or console will inform you of the system status:
LED Condition Meaning
OffSystem is disarmed and in normal operating mode (i.e., valet mode is off)
On Valet mode is on, the vehicle can be driven or serviced without having to disarm
Flashing System is armed and protecting your vehicle
Pause between flashes Either a malfunction (see page 17) or an intrusion was attempted (see page 18)
Automatic Battery-Saving Mode
To conserve vehicle battery power (the LED draws more current than the entire control
unit), if the system has remained continuously armed for 48 hours, the flash rate will
automatically slow to half the normal rate. After 96 hours, it slows to one-quarter.
16

AutoLock and AutoUnLock™
For your safety and that of your passengers, the doors automatically lock the instant you
turn on the ignition (see User-selectable features on pages 20-24). When you turn the
ignition off, AutoUnLock automatically unlocks the doors. To suit your preferences, you
may turn off either or both the AutoLock and/or AutoUnLock features. There are four
possibilities: AutoLock “on” while AutoUnLock is “off”, or vice-versa. The other two
combinations are both AutoLock and AutoUnLock “on” or both “off.”
Remote controlled sensor adjustments
Due to ever-changing conditions, all alarms require periodic fine-tuning of their sensors.
An improperly adjusted sensor is the most common cause of false alarms. With other
alarms, this requires repeated trips back to the dealer. Not so with Cyber 9. You can
adjust sensitivity electronically without tools and without even knowing where the
sensor is mounted! If the setting(s) of the Piezo Sensor is either too sensitive or not
sensitive enough, you may individually test and adjust the settings of each zone. To
adjust the Piezo Sensor, just use the following procedure:
1.Disarm the system, then select the sensor zone you wish to adjust:
a. Primary zone: Transmit channel 11 (LevelShift twice, then button 3).
b. Warning zone: Transmit channel 12 (LevelShift twice, then button 4).
2.To test the current sensitivity setting:
a.Primary zone: Firmly “thump” the window pillar with the side of your fist. You
will hear a chirp to confirm activation of the primary zone.
b. Warning zone: “Thump” the window pillar with somewhat less force. A chirp will
confirm activation of the warning zone.
3.If you are not satisfied with the detection level and wish to increase sensitivity, press
button 2 on your remote control. To decrease it, press button 4. Each time you
increase sensitivity, the siren will chirp in higher and higher pitched tones to confirm
the higher sensitivity setting. Conversely, lower and lower tones confirm each
sensitivity decrease. Two normal tone chirps indicate minimum and maximum
settings. There are 16 sensitivity levels for each of the two sensing zones.
4.Repeat steps 2 and 3 until you are satisfied with the sensitivity, then press button 1 to
record the new sensitivity setting and exit the sensor test/adjust mode (you’ll hear
three chirps to confirm exit). You may now either repeat steps 1–4 for the other
sensor zone, or press button 1 again to arm the system.
Sound complicated? It really isn’t, there’s just a lot of explanation of what’s happening
with each step. All you really have to do is the actions noted in bold type. Give it a try.
Smart AutoTesting™
Each time you remotely arm the system, it tests all triggers and sensors. If the hood or
trunk is open when you remotely arm, the system will immediately alert you of the
problem by sounding 4 chirps and 4 parking light flashes instead of the usual 2 and 2. If
a door is ajar, you will receive the usual 2 chirps and flashes, then, 5 seconds later, there
will be 4 chirps and 4 flashes. (This door ajar warning will not work on vehicles that
17
continued . . .

have factory-delayed courtesy lights). If a sensor is malfunctioning, you will receive the
usual 2 chirps and 2 flashes, then, 10 seconds later, there will be 4 chirps and 4 flashes.
NOTE: Since this is a warning indication, you will hear the 4 chirps even if you
have the chirp muting feature turned on.
nSpecific malfunction identification:The system can also indicate the specific
trigger or sensor that is malfunctioning. If you get the 4-chirp/4-flash signal upon
arming, perform the following to identify the malfunctioning trigger or sensor:
1. Remotely disarm, then turn on the ignition. The LED status indicator inside your
vehicle will blink 1-3 times, pause, then repeat.
2.Count the number of blinks in one cycle between pauses (for your convenience, the
blink cycle repeats a total of 5 times) and refer to the chart below:
Number of LED blinks between pausesTrigger/sensor indication
1 blinkPiezo Sensor
2 blinks*Door trigger*
3 blinksHood or trunk trigger
* If your vehicle has a factory-installed feature that turns off or dims the interior courtesy lights
several seconds after you exit the vehicle, the system cannot provide this indication.
Automatic malfunction bypass
To provide the utmost protection even if a system component malfunctions, your Cyber
9 system will automatically bypass any faulty point and arm all other triggers and
sensors to provide the utmost possible protection until you can have the system serviced
by your local Authorized Clifford Dealer. If you accidentally armed the system with the
hood, trunk or a door open, just close the open point and the system will again monitor
that point.
Multiple-event TotalRecall™
The system memory records the identity of the last 8 activated or malfunctioning
triggers and sensors, which allows your installer to instantly track down a malfunction.
To identify the triggers and sensors held in memory, use the following procedure:
1.With the ignition OFF, flick the PlainView valet switch to its latched side.
2. Press button 1 to “arm” the system, then again to “disarm.”
3. The LED will blink 1–3 times to indicate the most recently activated point, pause,
blink 1-3 times to indicated the next most recently activated point, and so on.
4. Write down the number of blinks between pauses and refer to the chart above.
5. Return the PlainView switch to its normal center position.
Smart prior intrusion attempt alert
If you hear three chirps when you remotely disarm, it means that a trigger or sensor was
activated in your absence. When you enter the vehicle and turn on the ignition (or start
the engine), the LED will blink 1–3 times, pause, then repeat the blink cycle 4 more
times. Count the number of blinks in any one cycle and refer to the chart above.
18