OPERATING INSTRUCTIONS CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
9 10
CONTROL PANEL BUTTONS
1) Power On and Off - Press the POWER button once to manually turn the unit on. Press
the POWER button once more to turn the unit off.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different
modes: (\[VTVKL(PY*VUKP[PVULY+LO\TPKPÄLY-HUVUS`HUK/LH[LY
3) Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan
speeds: High, Medium, and Low;OLMHUZWLLKJHUIL]PZ\HSS`KPZ[PUN\PZOLKI`[OL
ZWLLKVM[OLMHUPJVUVU[OLMYVU[WHULS;OLYLPZHUHKKP[PVUHSH\[VZWLLKZL[[PUN[OH[PZ
LUHISLKPUVUS`OLH[PUNHUKJVVSPUNTVKLZ;OPZZWLLKPZUL_[ZL[[PUNHM[LYSV^^OLU
WYLZZPUN[OLZWLLKJVU[YVSI\[[VU;OLZWLLKZ^PSSJ`JSL[OYV\NOPU[OPZVYKLY!High,
Medium, Low, Auto. Each change in speed will be associated with a “beep” sound from
the unit.
4) Temperature - Select the desired temperature by pressing either or key when using
[OL\UP[PUJVVSPUNVYOLH[PUNTVKL;OL[LTWLYH[\YLPUKPJH[VYÅHZOLZ[VKPZWSH`[OLKLZPYLK
[LTWLYH[\YLZL[[PUN(M[LY[OL[LTWLYH[\YLPZZL[[OL\UP[^PSSKPZWSH`[OPZ[LTWLYH[\YL
ZL[[PUN\U[PSP[PZJOHUNLKI`[OL\ZLY;OLT\S[PJVSVYKPZWSH`ZOV^Z[LTWLYH[\YLPU*LSZP\Z
VY-HOYLUOLP[7YLZZPUN[OLHUKI\[[VUZZPT\S[HULV\ZS`^PSSJOHUNL[OL[LTWLYH[\YL
ZLSLJ[IL[^LLU-HUK*
5) Timer;VWYVNYHT[OL[PTLYWYLZZ[OLTIMER ON button until the display shows a
ÅHZOPUN¸¹7YLZZ[OLVYI\[[VUZ[VJOHUNL[OLJSVJR[V[OLKLZPYLK[PTLMVY[OL
unit to automatically turn on.
Press the TIMER OFFI\[[VUHUK[OLKPZWSH`VU[OL\UP[^PSSÅHZO¸ ¹7YLZZ[OLVY
I\[[VUZ[VJOHUNL[OLJSVJR[V[OLKLZPYLK[PTLMVY[OL\UP[[VH\[VTH[PJHSS`[\YUVMM;OL
TIMER OFFPUKPJH[VY^PSSÅHZOMVYZLJVUKZ[VHJ[P]H[L[OL[PTLZ`V\WYVNYHTTLK
NOTE: The timer will also remember your settings when it is set. If you set the timer while in
Air Conditioning mode, the timer will automatically turn the unit on and off in air
conditioning mode according to the desired programmed times. The timer will also
remember the temperature settings, fan speed, and oscillation setting. The timer works
^OLU[OL\UP[PZPU(PY*VUKP[PVULYTVKL/LH[PUNTVKL+LO\TPKPÄLYTVKL-HUTVKLHUK
Auto mode
OPERATING THE UNIT USING THE CONTROL PANEL
(PY*VUKP[PVULY4VKL
0UZ[HSS[OLL_OH\Z[OVZLZHUK^PUKV^RP[WYVWLYS`ZLLWHNLZ
7S\N[OL7V^LY*VYKPU[VHULSLJ[YPJHSV\[SL[
;\YUVU[OL\UP[I`WYLZZPUN[OL76>,9I\[[VUVU[OLJVU[YVSWHULS
7YLZZ[OL4VKLI\[[VU\U[PS[OL¸ ¹PJVUHWWLHYZVU[OL4\S[PJVSVYKPZWSH`
7YLZZ[OLVYI\[[VUZ\U[PS[OLKLZPYLKYVVT[LTWLYH[\YLHWWLHYZVU[OLJVU[YVSWHULS
KPZWSH`;OL[LTWLYH[\YLYHUNLZMYVT--**
:LSLJ[[OLKLZPYLKMHUZWLLKI`WYLZZPUN[OLFAN SPEED button.
56;,!+\YPUNOV[KH`Z[OL\UP[^PSSJVVS[OLYVVTTVZ[LMÄJPLU[S`I`ZL[[PUN[OL[LT-
perature at the lowest setting and the fan speed on high. Reducing the length of the
exhaust duct, insulating the exhaust hose and window kit, and keeping direct sunlight
[VHTPUPT\T^PSSHSZVPTWYV]L[OLJVVSPUNLMÄJPLUJ`
NOTE: When the unit is running on cooling mode, the exhaust hoses are required and
must be vented outside using the supplied window kit.
+LO\TPKPÄLY4VKL
1) Install the exhaust hoses and window kit properly (see pages ).
7S\N[OL7V^LY*VYKPU[VHULSLJ[YPJHSV\[SL[
;\YUVU[OL\UP[I`WYLZZPUN[OLPOWER Button on the control panel.
7YLZZ[OLMODE button until the “ ” appears on the control panel display.
56;,!;OL\UP[VWLYH[LZH[SV^MHUZWLLKK\YPUNKLO\TPKPÄLYTVKL;OL\UP[JVVSZ
YVVTZSPNO[S`K\YPUN[OLKLO\TPKPÄJH[PVU2LLW[OL^PUKV^ZHUKKVVYZJSVZLK[VHPK
the effectiveness of the unit in removing the moisture from the room.
56;,!>OLU[OL\UP[PZY\UUPUNVUKLO\TPKPÄLYTVKL[OLL_OH\Z[OVZLZHYLYLX\PYLK
and must be vented outside using the supplied window kit.
56;,!;OL\UP[^PSSUV[WLYMVYTPUKLO\TPKPÄLYTVKL^OLU[OLYVVT[LTWLYH[\YLPZ
SV^LY[OHU-
Fan Mode
1) Plug the Power Cord into an electrical outlet.
;\YUVU[OL\UP[I`WYLZZPUN[OLPOWER button on the control panel.
7YLZZ[OLMODE button until the “ ” icon appears on the control panel display.
:LSLJ[[OLMHUZWLLKI`WYLZZPUN[OLFAN SPEED button.
;VJPYJ\SH[LTVYLHPYWYLZZ[OLSWINGI\[[VUVU[OLYLTV[LJVU[YVS;OLSV\]LYZ
will oscillate which moves the louvers up and down to increase air circulation.
NOTE: It is not necessary for the exhaust hoses and window kit to be installed to
operate the unit in fan mode.
Heating Mode
1) Install the exhaust hoses and window kit properly (see pages ).
7S\N[OL7V^LY*VYKPU[VHULSLJ[YPJHSV\[SL[
;\YUVU[OL\UP[I`WYLZZPUN[OLPOWER button on the control panel.
7YLZZ[OLMODE button until the “ “ icon appears on the control panel display.
7YLZZ[OLVYI\[[VUZ\U[PS[OLKLZPYLKYVVT[LTWLYH[\YLHWWLHYZVU[OL
JVU[YVSWHULSKPZWSH`;OL[LTWLYH[\YLYHUNLZMYVT--**
:LSLJ[[OLMHUZWLLKI`WYLZZPUN[OLFAN SPEED button. It is recommended to set
the fan speed to low.
NOTE: When heat mode is selected, the unit will shut down for 3-5 minutes, then start
in heating mode.
NOTE: When the unit is running on heating mode, the exhaust hoses are required and
must be vented outside using the supplied window kit.